• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.861-869
• /
• 2014

This paper shows the research of a platform architecture relates to the LTE-based macro basestation; the proposed platform architecture is designed with the interface between the baseband signal and IF (Intermediate Frequency) per codeword. Using this method, we can smoothly transmit/receive a large amounts of data regardless of the number of antenna in a macro base station which is used technology such as massive MIMO. In this paper, We analyzed the evolution of LTE technology and the trend in the development of the LTE-based system. For validation of the proposed architecture, we compare the general architecture of a conventional with the proposed architecture. From the calculation results of transmission quantity data, we see that the proposed architecture can give better performance than the existing architecture. By presenting this architecture, we hope to provide a new foundation for Design and Implementation of a LTE base station platform which is used technology such as massive MIMO, carrier aggregation (CA), coordinated multi point (CoMP).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.113-122
• /
• 2010

In this paper, we propose a CP (Cyclic Prefix) detection based SSS (Secondary Synchronization Signal) detection method for initial cell search in 3GPP LTE (3rd Generation Partnership Project Long Term Evolution) FDD/TDD (Frequency Division Duplex/Time Division Duplex) dual mode downlink receiver. In general, a blind coherent SSS detection method which can detect SSS without CP detection is applied. However, coherent detection method caused performance degradation by channel compensation error at high speed environment because it uses estimated CFR (Channel Frequency Response) at PSS (Primary Synchronization Signal), and it can be more serious problem in TDD mode due to increased distance between PSS and SSS. Also blind detectionhas the drawback of high computational complexity. Therefore, we proposed a CP type pre-decision structure with non-coherent SSS detection which has stable operation in high speed channel environments for 3GPP LTE TDD mode as well as FDD mode, and can reduce computational complexity by applying CP detection before SSS detection. Simulation results show that the proposed method has stable operation for 3GPP LTE TDD/FDD dual mode downlink receiver in various channel environments.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1059-1068
• /
• 2021

In urban areas, GPS(Global Positioning System)/GNSS(Global Navigation Satellite System) signals are blocked or distorted by structures such as buildings, which limits positioning. To compensate for this problem, in this paper, fingerprinting-based positioning using RSRP(: Reference Signal Received Power) information of LTE signals is performed. The W-KNN(Weighted - K Nearest Neighbors) technique, which is widely used in the positioning step of fingerprinting, yields different positioning performance results depending on the similarity distance calculation method and weighting method used in correlation. In this paper, the performance of the fingerprinting positioning according to the techniques used in correlation is comparatively analyzed experimentally.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.3
• /
• pp.169-173
• /
• 2020

Location-based services are used as core services in various fields. In particular, in the field of public services such as emergency rescue, accurate location estimation technology is very important. Recently, the technology of tracking the location of self-isolation subjects for COVID-19 has become a major issue. Therefore, location estimation technology using personal smart devices is being studied in various ways, and the most widely used method is to use GPS. Other representative methods are using Wi-Fi, Pedestrian Dead Reckoning (PDR), Bluetooth Low Energy (BLE) beacons, and LTE signals. In this paper, we introduced a positioning technology using deep learning based on LTE Channel State Information-Reference Signal (CSI-RS) data, and confirmed the possibility through an outdoor location estimation experiment using a commercial LTE signal.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.68-73
• /
• 2016

This paper describes the prototyping of CDMA bi - directional group search system using USRP and LTE. This paper describes the results of RF signal generation and transmission by implementing a spread spectrum signaling system, which is a new standard of COSPAS SARSAT, using a bi-directional search structure system using commercial LTE network and USRP.

• Journal of Satellite, Information and Communications
• /
• v.8 no.1
• /
• pp.31-34
• /
• 2013

This paper deals with the interfering audio noise caused by LTE(Long Term Evolution) UE(User Equipment) which is 4th generation mobile communications on audio devices. At first, we realized that the interfering signal of the LTE UE is determined by the transmit power of the LTE UE through analysis and measurement. Then, we performed to measure audio noise level according to the variation of transmitting power level and separation distance between the LTE UE and an audio device. As a result, it is required that minimum separation distance should be 25 cm and above in order to protect audio device from the interference noise of the LTE UE with the maximum transmit power level of 22 dBm.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.361-368
• /
• 2022

An indoor navigation system that utilizes long-term evolution (LTE) signals has the benefit of no additional infrastructure installation expenses and low base station database management costs. Among the LTE signal measurements, received signal strength (RSS) is particularly appealing because it can be easily obtained with mobile devices. Propagation channel models can be used to estimate the position of mobile devices with RSS. However, conventional channel models have a shortcoming in that they do not discriminate between line-of-sight (LOS) and non-line-of-sight (NLOS) conditions of the received signal. Accordingly, a previous study has suggested separated LOS and NLOS channel models. However, a method for determining LOS and NLOS conditions was not devised. In this study, a machine learning-based LOS/NLOS classification method using RSS measurements is developed. We suggest several machine-learning features and evaluate various machine-learning algorithms. As an indoor experimental result, up to 87.5% classification accuracy was achieved with an ensemble algorithm. Furthermore, the range estimation accuracy with an average error of 13.54 m was demonstrated, which is a 25.3% improvement over the conventional channel model.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.463-468
• /
• 2016

With the constant increase in network traffic, wireless operators are finding it more challenging to keep network hardware costs to a minimum. At the same time, the energy cost associated with operating a network has increased proportionally. Therefore, the search for higher network capacity is simultaneously accompanied by the search for a cost-efficient network deployment. In this paper, we show that a saving in transmitted signal energy can be achieved at the signal design level by deploying very specific signal processing techniques. Using an orthogonal frequency-division multiplexing signal for Long-Term Evolution networks as an example, we utilize a novel non-uniform companding quantizer to save a transmitted signal energy. Our results show that by using non-uniform quantization it is possible to further optimize 4G wireless networks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6838-6844
• /
• 2014

3GPP LTE-Advanced systems adopt multiple antennas for high speed data transmission. In general, the receiver complexity of a spatially mutiplexed (SM) multiple-input multiple-output (MIMO) system grows in proportion to the number of candidate vectors. A large number of candidate vectors increases the reliability of the soft output values. The maximum likelihood (ML) signal detection with a large number of candidate vectors achieves high performance. On the other hand, low complexity receiver techniques with a small number of candidate vectors provide soft output values, such as low reliability. This paper addresses the improving reliability of the soft output obtained from a small number of candidate vectors. The improved performance of the proposed technique with the aid of computer simulations is reported.

• ETRI Journal
• /
• v.43 no.2
• /
• pp.232-245
• /
• 2021

As wireless communication continues to develop in limited frequency resource environments, it is becoming important to identify the state of spectrum utilization and predict the amount needed in future. It is essential to collect reliable information for data analysis. This paper introduces a platform that enables the gathering of the scheduling information of a long-term evolution (LTE) cellular system without connecting to the network. A typical LTE terminal can confirm its assigned resource information using the configuration parameters delivered from a network. However, our platform receives and captures only the LTE signal over the air and then enables the estimation of the data relevant to scheduling for all terminals within an LTE cell. After extracting the control channel signal without loss from all LTE subframes, it detects valid downlink control information using the proposed algorithm, which is based on the error vector magnitude of depatterned symbols. We verify the reliability of the developed platform by comparing it with real data from mobile phones and service operators. The average difference in resource block utilization is only 0.28%.