• 한국응용과학기술학회지
• /
• 제34권1호
• /
• pp.183-188
• /
• 2017

본 연구는 중 소형 선박의 배가스에 포함되어 있는 황산화물 및 질소산화물을 처리하기 위한 습식 스크러버의 처리효율에 관한 내용이다. 실험은 질소산화물 기술문서($NO_X$ Technical Code)의 E3 모드에 준해서 진행하였다. 엔진에서 황산화물을 배출하기 위해서, 연료로 사용되는 경유에 ditertiarybutyldusulfide를 혼합하여 황 함유량을 높인 연료로 실험을 진행하였다. 배가스 내의 질소산화물의 대부분을 차지하는 NO가스는 $NO_2$로 산화시켜 습식 스크러버로 흡수하였으며, 황산화물인 $SO_2$는 세정액에 잘 흡수되어 100% 처리효율을 확인하였다.

• Tribology and Lubricants
• /
• 제32권4호
• /
• pp.132-139
• /
• 2016

The piston of a marine diesel engine works under severe conditions, including a combustion pressure of over 180 bar, high thermal load, and high speed. Therefore, the analyses of the fatigue strength, thermal load, clamping (bolting) system and lubrication performance are important in achieving a robust piston design. Designing the surface profile and the skirt ovality carefully is important to prevent severe wear and reduce frictional loss for engine efficiency. This study performs flexible multi-body dynamic and elasto-hydrodynamic (EHD) analyses using AVL/EXCITE/PU are performed to evaluate tribological characteristics. The numerical techniques employed to perform the EHD analysis are as follows: (1) averaged Reynolds equation considering the surface roughness; (2) Greenwood_Tripp model considering the solid_to_solid contact using the statistical values of the summit roughness; and (3) flow factor considering the surface topology. This study also compares two cases of skirt shapes with minimum oil film thickness, peak oil film pressure, asperity contact pressure, wear rate using the Archard model and friction power loss (i.e., frictional loss mean effective pressure (FMEP)). Accordingly, the study compares the calculated wear pattern with the field test result of the piston operating for 12,000h to verify the quantitative integrity of the numerical analysis. The results show that the selected profile and the piston skirt ovality reduce friction power loss and peak oil film pressure by 7% and 57%, respectively. They also increase the minimum oil film thickness by 34%.

• 한국산업융합학회 논문집
• /
• 제20권4호
• /
• pp.325-332
• /
• 2017

The engine cooling system is a device that maintains the temperature in the engine room at an appropriate level by driving a cooling fan when the temperature in the engine room generated during the vehicle operation occurs over a certain temperature. In recent years, the vehicle cooling system has changed to an electronic system. Therefore, in this paper, we design and develop a hall sensor based electronic engine cooling system. In this paper, a hall sensor module and an actuator module for engine cooling control system are designed. In order to verify the performance of the designed module, the magnetic field control was verified through the simulation of the diameter and the head of the coil.

• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.107-114
• /
• 2009

A Common-Rail Direct Injection (CRDI) system for high speed diesel engines was developed to meet reductions of noise and vibration, emission regulations. High pressure in the common rail with electric control allows the fuel quantity and injection timing to be optimized and controlled throughout a wide range of engine velocity and load conditions. In this study, CRDI system analysis model which includes fuel and mechanical systems was developed using commercial software, AMESim in order to predict characteristics for various fuel injection components. The parameter sensitivity analysis such as throttle size, injection rate, plunger displacement, supply pressure of fuel injection for system design are carried out.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2014년도 하계학술대회
• /
• pp.191-193
• /
• 2014

본 논문에서는 안드로이드 기반의 스마트 셋톱박스인 OTT(Over The Top)가 3D 게임용 유니티 엔진을 위한 인터페이스를 제공하는 유니티 런처의 설계를 기반으로 LS(HTTP Live Streaming) 스트리밍 서버 및 스트리밍 동영상용 3D 텍스쳐를 설계한다.

• Tribology and Lubricants
• /
• 제26권5호
• /
• pp.291-296
• /
• 2010

The purpose of this paper is to study the fuel economy improvement experimentally when the viscosity of engine oil is lowered. The emissions are measured for CVS-75 mode with SAE viscosity grades. The test results indicate that a close correlation has been found between the engine oil viscosity and the fuel economy. The lowering of engine oil viscosity causes the reduction of friction loss which has a very close relation with the fuel economy. These results as the lowering of engine oil viscosity will be a important factor for improvement of the fuel economy and reduction of the $CO_2$ emission.

• 한국산업융합학회 논문집
• /
• 제19권1호
• /
• pp.31-38
• /
• 2016

Since the oil shock of 1970's there was a strong upward tendency for the use of the high viscosity and poorer quality fuels. Therefore the misfiring engine occurs due to the decrease of quantity injected for lean burn and emission control in Compression Ignition Common Rail Direct Injection diesel engine. In this study, it is designed and used the test bed which is installed with fuel injector controller. In addition to equipped engine using CRDI by controlling the injection timing with mapping modulator, it has tested and analyzed the engine performance and combustion characteristics, as it is varied that they are the operating parameters: fuel injected quantity, engine speed and injection timing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2818-2820
• /
• 2005

Recently, a request of protection environment for ocean has been increased. Owing to the reason above the development of highly efficient control technique for low pollution vessel diesel engine is concerned. In this paper, we study a method of remote diagnosis and monitoring for vessel diesel engine which is better safe and environmental friendly. Specially we propose the user interface building method of vessel diesel engine remote monitoring system using Internet.

• 항공우주시스템공학회지
• /
• 제9권2호
• /
• pp.63-71
• /
• 2015

An aircraft engine is considered as the most important element among aircraft systems. Thus type certificate is required for an aircraft engine to ensure its safety under appropriate airworthiness standard. U.S. FAR Part 33 or European CS-E is widely adopted as an airworthiness standard for aircraft engines, and other representative countries of the world established own airworthiness standards under their regulations. In this paper, we compared differences of the requirements between FAR Part 33 and CS-E, and proposed the rulemaking items to harmonize Korean Airworthiness Standard for Aircraft Engines with worldwide standards and to contribute to growth of aviation industry.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.23-24
• /
• 2006

The International Maritime Organization announced that the regulation of nitrogen oxide put into force for vessels constructed after 2000 from May, 2005 as agenda is satisfied on May, 2004. A honeycomb-typed Pillared Inter-Layered Clay(PILC) catalyst was developed for do-NOx SCR system in 2004. This catalyst has been applied to 9H25/33 engine that is one of the main diesel engines in Engine Machinery Division of the Hyundai Heavy Industries CO., LTD. In addition, we have tried to develop better catalysts in the aspects of easy synthetic method and performance.