• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.967-968
• /
• 2011

직립 기동 영구자석 동기 전동기(Line-Start Permanet Magnet Synchronous Motor : LSPM)는 기존 3상 유도기에 비해 높은 효율과 역율을 가진다. 또한 제어기를 사용하지 않고 기동 할 수 있다는 장점 때문에 펌프나 팬 등에 단순한 구동원에 적용 할 수 있는 전동기이다. 구조는 유도기와 달리 영구자석이 매입되기 때문에 이에 따라 영구자석의 위치와 크기에 따라 모터의 특성이 변화 한다. 본 논문에서는 실험 계획법과 FEM 유한 요소법을 이용하여 영구자석의 크기는 고정되어 있는 상태에서 영구자석 슬롯의 모양만을 설계 인자에 따라 해석하였다. 그리고 해석을 통한 결과를 비교 분석하여 직립기동 영구자석 동기 전동기의 효율과 토크특성을 개선하고자한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.104-106
• /
• 2003

In this paper, we study about the stator winding magnetization method and the magnetizing fixture magnetization method in post-assembly magnetization. Most of small electrical machine use the stator winding magnetization method but it is impossible to magnetize the permanent magnet by the stator winding magnetization method when the capacity of machine increases and the coercive force of magnet increases. And the eddy current disturbs the magnetization seriously in case of LSPM(Line Start Permanent magnet Motor) that have conductor bar in rotor. Hence, the magnetization fixture is required. So, in this paper we study about the post-assembly magnetization method that can use the stator winding magnetization method or must use the magnetization fixture magnetization method.

• 전기학회논문지
• /
• 제56권4호
• /
• pp.699-704
• /
• 2007

In this paper, optimized model was designed for the starting characteristic of the Single-Phase Line-Start Permanent Magnet Synchronous Motor by using the Design of Experiment. A field pole angle, thickness and distance from center axis of permanent magnet were selected as design factor. We executed the transient state characteristic analysis of 8 test models. The transient state characteristic analysis was executed by using the 2 dimensional Finite Element Method and the Time Difference Method. We checked the fact that the selected design factor affected starting characteristic of the Line-Start Permanent Magnet Synchronous Motor. Depend on this result we found the optimized design point by using the response optimization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.768-769
• /
• 2008

This paper examines an design of double-barrier rotor structure for improving the efficiency performance in a single-phase line-start permanent magnet(LSPM) motor. By utilizing the advantages of double-barrier rotor design that by increasing reluctance torque generation to compensate magnet torque production, the copper loss reduction is achieved. The optimal approach of response surface methodogy(RSM) is performed for determining a optimum double-barrier rotor structure. The improving of efficiency performance is confirmed by finite element method(FEM) and test.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.631-632
• /
• 2006

This paper is written by research for the transient characteristics of the Single-phase Line-start permanent Magnet. The Single-phase Line-start permanent Magnet is most likely to substitute for Single-phase Induction Motor which is used about many appliance currently, because that has good points. For example, It has a Line-start of ability and a High-efficiency. And it need not power convergence device. The rotor of The Single-phase Line-start permanent Magnet has cage-bar with permanent magnet. This motor is started by cage-bar. When it entered synchronous condition, the rotor is rotated by the permanent magnet. But the design of the permanent magnet is very important, because the breaking torque of the permanent magnet interrupt to start a rotor. Finally, if Flux Barrier is not concerned, we do not get result of our object. Therefore this thesis is concerned about Flux Barrier.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1306-1308
• /
• 2005

The characteristic of line start permanent magnet(LSPM) motor with overhang structure is analyzed using 3dimensional finite element method(3D FEM). We propose the appropriate overhang length by considering the magnetic flux distribution according to changing overhang length and manufacturing process. 3D FEM analysis is inevitable because the increase of the total flux cannot be appropriately considered in 2D FEM. In equal model specification total flux is recalculated at 3D FEM, because of considering lamination length. This paper compares the characteristic of Back-emf with and without overhang by permanent magnet that has identical volume.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.77.2-77
• /
• 2001

Profibus-DP is the performance-optimized version of Profibus, specifically dedicated to time-critical communication between automation systems and distributed peripherals. It is included into the International Fieldbus Standard IEC 61158. In this paper, The ASIC for Profibus-DP simple and intelligent slave is proposed and implemented. It can be fully compatible with Siemens LSPM2 as a pin-to-pin base and it also has a high-level function that can replace current intelligent slave boards with one chip. Also it can be used without special OS coding unlike SPC3 of Siemens.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1043-1044
• /
• 2007

The line-start permanent magnet synchronous motor has a high efficiency and an advantage in constant speed operation regardless of the effect of load variation. However it is difficult to predict the performance of characteristics accurately, because of the unbalanced starting torque with the initial starting position of the rotor and the generation of a break torque. In this paper the dynamic characteristics of the line-start permanent magnet synchronous motor are described and compared with those of the squirrel-cage induction motor through the simulation to find the characteristics of the permanent magnets and the rotor bars in the line-start permanent magnet synchronous motor. Finally this paper gives the comparison between the simulation results and the experiment results.

• 조명전기설비학회논문지
• /
• 제21권3호
• /
• pp.125-131
• /
• 2007

가전분야에서의 전동기 효율향상을 통한 에너지 소비절감 효과는 상당히 크지만 이를 위한 전동기의 설계/해석 기술 확보가 아직은 미흡한 상태이다. 이에 따라 유도형 동기전동기가 제안되었지만, 유도형 동기 전동기는 유도전동기와 통기전동기의 특성을 동시에 가지고 있어, 해석 및 설계가 쉽지 않다. 따라서 본 논문에서는 기존의 냉장고 압축기용 전동기인 단상유도전동기를 대처할 수 있는 단상 유도형 동기전동기를 이용해 파라미터에 따라 특성이 어떻게 바뀌는가에 대해 서술하였다. 그에 따라 단상유도전동기의 정상상태 특성을 해석하고 제안모델의 성능을 기존모델과 비교하고 실험하여 해석결과의 신뢰성을 검증한다. 또한 본 논문에서는 제안모델의 기존 고정자 형상이나 권선 스팩을 유지하고 회전자의 형상이나 구조만을 변경시켜 성능향상을 도모하였다. 해석방법으로는 전자장 수치 해석적인 방법으로 널리 이용되고 있는 유한요소법(Finite Element Method : FEM)을 이용하였다.