• Fisheries and Aquatic Sciences
• /
• 제8권3호
• /
• pp.161-166
• /
• 2005

We examined the variation in survival and the respiration and filtration rates of Tresus keenae in response to changes in water temperature and salinity. The survivorship of animals exposed to temperatures below $25^{\circ}C$ for 7 days was $80\%$; however, all test animals died on the fourth day at $28^{\circ}C$. The upper lethal temperature over 7 days was $25.9^{\circ}C$. After exposure to lower temperatures, $93\%$ ofthe animals survived at temperatures over $5^{\circ}C$ for 10 days. Survivorship rapidly decreased below $4^{\circ}C$ with all test animals dying at $2^{\circ}C$ on the eighth day. The $LT_{50}$ over 10 days was $4.8^{\circ}C$. The respiration and filtration rates of T. keenae increased as temperature increased. It is believed that energy consumption increases as a result of the increased respiration rate at temperatures above the upper lethal temperature. At temperatures below the lower lethal temperature, the metabolic rate of T. keenae was substantially lowered. In response to changes in salinity, the survivorship of T. keenae was $90\%$ at 30.2 psu after exposure for 5 days; at below 26.8 psu, all test animals died by the fifth day. The $LS_{50}$ was 29.1 psu. As salinity decreased, both the respiration rate and the filtration rate decreased. At 23.5 psu, the respiration and filtration rates decreased by 48 and $34\%$, respectively. These data have implications for increasing efficiency in the production and management of shellfish aquaculture farms.

• 한국세라믹학회지
• /
• 제35권6호
• /
• pp.583-593
• /
• 1998

C1A3계 속경성 혼합시멘트에 대한 H3BO3의 첨가에 따른 mortar의 물성과 수화 생성물에 관한 연구를 하였다. H3BO3의 첨가는 응결 시간의 지연과 흐름성의 개선을 가져 왔다. H3BO3의 첨가에 따라 초기 수화 생성물은 monosulfate가 생성 되며 이 생성물이 존재하는 기간도 길어진다. 일단 monosulfate가 생성되면 그후 ettringite로 변화되면서 중간 단계로 gel상의 물질로 변화된다. 초기에 생성되어지는 monosulfate는 mortar의 응결시간과 flow에 영향을 준다.

• Korean Chemical Engineering Research
• /
• 제45권1호
• /
• pp.67-72
• /
• 2007

부분 최소자승회귀, 균형 잡힌 realization, 균형 잡힌 truncation을 결합함으로써, MIMO 상태공간 모델의 모델인식을 위한 효과적인 방법이 개발되었다. 개발된 방법에서 MIMO 시스템은 고차 ARX 모델로 표현되는 다중 MISO 시스템으로 분해된다. 이 때, ARX 모델의 파라미터는 부분 최소자승회귀에 의해 추정된다. 그 후, realization을 통해 각각의 MISO ARX 전달함수에 대한 MISO 상태공간 모델이 만들어지며, MIMO 상태공간 모델로 결합된다. 최종적으로, 균형 잡힌 realization과 균형 잡힌 truncation을 통해 최소의 균형 잡힌 MIMO 상태공간 모델이 얻어진다. 제안된 방법은 고압 $CO_2$ 용해도 측정 실험 장치의 온도제어를 위한 모델 예측 제어의 설계에 적용되었다.

• 환경영향평가
• /
• 제20권3호
• /
• pp.313-324
• /
• 2011

The purpose of this study is to present the raw data for establishing the plan of top soil conservation in soil environment and preventing the soil loss by establishing the potential amount of soil loss using RUSLE. The results are as follows. To apply the RUSLE model, we calculated the potential amount of soil loss by using 5 factors; rainfall erosion factor(R), topographical factor(LS), soil erosion factor(K), land cover factor(C) and erosion control factor(P). The assessment map of soil loss was drawn up by classifying 5 grades. According to the soil loss estimation by the RUSLE, it showed that approximately 83.9% of the study area had relatively lower possibility of soil loss which was the 1 ton/ha in annual soil loss. Whereas, the 7.0% of the study area was defined as high risk area which was the 10 ton/ha in annual. Therefore, this area was needed that there was environment-friendly construction of farm land, improvement of cultivation environment and so forth. In future, if we will analyze the amount of soil loss of Gyeongju national park and Hyeongsan river watershed, we will offer the help to establishing the conservation plan of soil environment in Gyeongsangbuk-do.

• 대한한방부인과학회지
• /
• 제18권1호
• /
• pp.64-80
• /
• 2005

The pharmacological effects of medicinal remedies traditionally used in Asian countries for improving the blood circulation were examined on isolated rat thoracic aorta strips in organ baths. Each experimental medicine was consecutively extracted under reflux with water. Of 17 plants, Curcuma longa (CL) having the strongest acute relaxant activity in endothelium-intact arteries, Mucunae caulis (MC), Cirsium pendulum (CP), Rumex longiflius (RL), Paeonia suffruticosa (PS), Curcuma zedoaria (CZ), Scirpus maritimus (SM), Siphonostegia chinensis (SC), Leonurs sibiricus (LS) and Typha orientalis (TO) were showing dose-dependent relaxant activity. Long-term relaxant effects were showed in Curcuma aromatia (CA), MC, CP, RL, PS, Potulacae grandiflorae (PG), CZ, Panax notoginseng (PN), Achyranthes japonica (AJ), CL, SC, Lycoppus lucidus (LL) and Corydalis turtschaninovii (CT). In endothelium-injury test using carbachol, CL, SC, MC, RL and PS which are having the acute vasorelaxing activity and CA and CT which are not showing vasorelaxaing activity were damaged to endothelium. As a result of this study, the possibility that a part of medicinal remedy may contribute to the beneficial effects in blood circulation was proposed, but inter-individual variation has been observed. Also, further studies on the vasorelaxant effects of these remedies are still required.

• 아시안잔디학회지
• /
• 제11권4호
• /
• pp.311-320
• /
• 1997

This study was carried out to induce and maintain callus from 59 zoysiagrass lines, to know the effective disinfestation method for zoysiagrass stolon as explant and the difference in the response of callus induction among 59 lines, and to investigate the effect of medium, growth regulators, light, temperature, stolon part and internode position on callus induction and emhryogenic callus(E.C.) formation. The treatment of 0.lmg/L $HgCl_2$for 15 min resulted in no contamination and the highest callus induction(46.6%). Callus was induced from the 59 zoysiagrass lines. The callus growth of Z. japonica and Z. sinica was generally better than Z. matrella Ten cell lines whose callus and stolon grow fast in culture and in field, respectively were selected to he used for breeding. Callus induction was the most effective at 2.0mg /L of both 2, 4-D and picloram in MS medium. MS medium was the best for callus induction and growth while LS medium was the best for embryogenic callus and shoot formation. Callus induction and growth was better at 28, 31$^{\circ}C$. than 25$^{\circ}C$. and dark condition was better than light condition in MS me-dium containing 2mg/L 2,4-D. While callus induction was better with node part as explant than with internode part, callus growth and embryogenic callus formation was better with internode part. In 'Japonica 1', the first internode was the most effective in callus induction, but third internode was the best in '$M_2$ X $S_2$'.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1686-1704
• /
• 2021

This study addresses the numerical simulation of the shield building of an AP1000 nuclear power plant (NPP) subjected to a large commercial aircraft impact. First, a simplified finite element model (F.E. model) of the large commercial Boeing 737 MAX 8 aircraft is established. The F.E. model of the AP1000 shield building is constructed, which is a reasonably simplified reinforced concrete structure. The effectiveness of both F.E. models is verified by the classical Riera method and the impact test of a 1/7.5 scaled GE-J79 engine model. Then, based on the verified F.E. models, the entire impact process of the aircraft on the shield building is simulated by the missile-target interaction method (coupled method) and by the ANSYS/LS-DYNA software, which is at different initial impact velocities and impact heights. Finally, the laws and characteristics of the aircraft impact force, residual velocity, kinetic energy, concrete damage, axial reinforcement stress, and perforated size are analyzed in detail. The results show that all of them increase with the addition to the initial impact velocity. The first four are not very sensitive to the impact height. The engine impact mainly contributes to the peak impact force, and the peak impact force is six times higher than that in the first stage. With increasing initial impact velocity, the maximum aircraft impact force rises linearly. The range of the tension and pressure of the reinforcement axial stress changes with the impact height. The perforated size increases with increasing impact height. The radial perforation area is almost insensitive to the initial impact velocity and impact height. The research of this study can provide help for engineers in designing AP1000 shield buildings.

• 한국자원식물학회지
• /
• 제31권6호
• /
• pp.675-683
• /
• 2018

This study describes an efficient and widely applicable droplet-vitrification following cryopreservation for shoot tips of Chrysanthemum morifolium (Ramat.) cvs. 'Borami' and 'Yes morning'. The shoot tips of Chrysanthemum were precultured in Murashige and Skoog (MS) liquid medium supplemented with sucrose (0.3-0.7 M). Precultured explants were treated with loading solution (LS, C6) containing glycerol 20% and sucrose 20% for 30 min and exposed to dehydration solution (B5) containing 40% of glycerol and 40% of sucrose for 60 min at $25^{\circ}C$, and then transferred onto droplets containing $2.5{\mu}l$ PVS3 on sterilized aluminum foils ($4cm{\times}0.5cm$) prior to direct immersion in liquid nitrogen (LN) for 1 h. The highest regeneration rate (%) was obtained when shoot tips were precultured with treatment-2 (exposing of shoot tips to MS + 0.3M sucrose for 30 h and then treated with MS+0.5 M sucrose for 16 h) at $25^{\circ}C$ in both the cultivars. The viability of cooled samples, followed by culturing on $NH_4NO_3$-free MS medium for first 5 days was increased to two-fold (80.7%) regrowth rate over those cultured on normal MS medium or MS medium containing plant growth regulators. This result shows droplet-vitrification would be a promising method for cryobanking chrysanthemum germplasm.

• 소성∙가공
• /
• 제28권3호
• /
• pp.135-144
• /
• 2019

Electromagnetic impulse welding (EMIW) is a type of solid state welding using the Lorentz force generated by interaction between the magnetic field of the coil and the current induced in the workpiece. Although many experimental studies have been investigated on the expansion and compression welding of tube using the EMIW process, studies on the EMIW process of lap joint between flat sheets are uncommon. Since the magnetic field enveloped inside the tube can be controlled with ease, the electromagnetic technique has been widely used for tube welding. Conversely, it is difficult to control the magnetic field in the flat sheet welding so as to obtain the required welding velocity. The current study analyzed the effects of coil shape on the impulse velocity for suitable flat one-turn coil for the EMIW of the flat sheets. The finite element (FE) multi-physics simulation involving magnetic and structural field of EMIW were conducted with the commercial software LS-DYNA to evaluate the several shape variables, viz., influence of various widths, thicknesses, gaps and standoff distances of the flat one-turn coil on the impulse velocity. To obtain maximum impulse velocity, the flat one-turn coil was designed based on the FE simulation results. The experiments were performed using an aluminum alloy 1050 sheets of 1.0mm thickness using the designed flat one-turn coil. Through the microscopic interfacial analysis of the welded specimens, the interfacial connectivity was observed to have no defects. In addition, the single lap joint tests were performed to evaluate the welding strength, and a fracture occurred in the base material. As a result, a flat one-turn coil was successfully designed to guarantee welding with bond strength equal to or greater than the base material strength.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.396-408
• /
• 2019

The tubes which are applied in jacket platforms as the supporting structure might be collided by supply vessels. Such kind of impact will lead to plastic deformation on tube members. As a result, the ultimate strength of tubes will decrease compared to that of intact ones. In order to make a decision on whether to repair or replace the members, it is crucial to know the residual strength of the tubes. After being damaged by lateral impact, the simply supported tubes will definitely loss a certain extent of load carrying capacity under uniform axial compression. Therefore, in this paper, the relationship between the residual ultimate strength of the damaged circular tube by collision and the energy dissipation due to lateral impact is investigated. The influences of several parameters, such as the length, diameter and thickness of the tube and the impact energy, on the reduction of ultimate strength are investigated. A series of numerical simulations are performed using nonlinear FEA software LS-DYNA. Based on simulation results, a non-dimensional parameter is introduced to represent the degree of damage of various size of tubes after collision impact. By applying this non-dimensional parameter, a simplified formula has been derived to describe the relationship between axial compressive residual ultimate and lateral impact energy and tube parameters. Finally, by comparing with the allowable compressive stress proposed in API rules (RP2A-WSD A P I, 2000), the critical damage of tube due to collision impact to be repaired is proposed.