• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.409-414
• /
• 2010

The applications based on geographical location are increasing rapidly in wireless sensor networks (WSN). Recently, various localization algorithms have been proposed but the majority of algorithms rely on the specific hardware to measure the distance from the signal sources. In this paper, we propose the Weighted Multiple Rings Localization(WMRL). We assume that each deployed anchor node may periodically emit the successive beacon signals of the different power level. Then, the beacon signals form the concentric rings depending on their emitted power level, theoretically. The proposed algorithm defines the different weighting factor based on the ratio of each radius of ring. Also, If a sensor node may listen, it can find the innermost ring of the propagated signal for each anchor node. Based on this information, the location of a sensor node is derived by a weighted sum of coordinates of the surrounding anchor nodes. Our proposed algorithm is fully distributed and does not require any additional hardwares and the unreliable distance indications such as RSSI and LQI. Nevertheless, the simulation results show that the WMRL with two rings twice outperforms centroid algorithm. In the case of WMRL with three rings, the accuracy is approximately equal to WCL(Weighted Centroid Localization).

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.170-175
• /
• 2009

This paper introduces Zigbee based ubiquitous service. Most of ubiquitous services require the position information. Positioning algorithms utilize the transmission characteristics of the signal. Zigbee based positioning researches have been conducted mainly for the spatial factors inside the building. This paper proposes the possibility to consider the temporal factors of Zigbee signal and analyzes empirically the signal characteristics influenced according to the temporal factors as well as the spatial factors for ubiquitous services based on Zigbee sensor network.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.56.5-56
• /
• 2002

This paper studies on the feedback linearization of the looper system for hot strip mills, where the looper system plays an important role in regulating the strip tension. Firstly, nonlinear dynamic equations of the looper system are simply introduced. Secondly, using the static feedback linearization algorithm, a linear model of the looper system is obtained, of which usefulness is validated from comparison between the linear model and the nonlinear model, and design of LQI(Linear Ouadratic Integral optimal control) and ILQ (Inverse Linear Quadratic optimal control) looper control systems. In result, it is shown that the linear looper model by the feedback linearization well describes nonlin...

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1284-1294
• /
• 2010

The ZigBee is one of the most important technologies for composing USN. It is one of the IEEE 802.15.4 standards to support personal area networks. It uses a hierarchical routing or an on-demand route discovery strategy as an address allocation method. A hierarchical routing doesn't use a routing table but only uses a child node or a parent node as an intermediate node for data delivery. Therefore, the ZigBee network's topology greatly affects the overall network performance. In this paper, we propose a more trustworthy algorithm than only using the depth and widely variable LQI during network formation, and moreover we propose an algorithm to measure network's trustworthiness. We simulate our algorithm using the NS-2 and implement our network using the MG2400 ZigBee module for verifying performance.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.50-51
• /
• 2013

화재발생시 기존의 비상경보설비는 화재경보라는 단순한 정보만을 제공함으로서 대피자의 입장에서는 건축물의 안전상황 및 피난상황을 식별할 수 없다. 따라서 화재발생시 대피자들이 밀집되는 병목현상이나 화재 영향에 노출되어 있는 피난경로로의 대피 등은 화재 피해를 가중시키고 있다. 본 연구의 목적은 현재 응용 가능한 대표적인 Ubiquitous 기술 중 개인의 위치를 식별하여 이용하는 위치인식기술 RSSI(Received Signal Strength Indication)을 활용한다. RSSI를 기반으로 한 LQI(Link Quality Indication)는 무선통신기간의 거리인식을 통해 대피자 정보 시스템 정보를 획득한다. 이러한 위치정보시스템을 응용하여 개발한 화재 안전 시스템은 화재 위치를 식별하고 화재위험 지역의 상황변화를 예측하여 피난경로 선정을 위한 안전정보를 제공하여 준다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1012-1015
• /
• 1996

This study focuses on the optimal operation and control strategy of the fuel cell process. The control objective of the Phosphoric Acid Fuel Cell (PAFC) is established and dynamic modeling equations of the entire fuel cell process are formulated as discrete-time type. On-line optimal control of the MIMO system employs the direct decomposition-coordination method. The objective function is modified as the tracking form to enhance the response capability to the load change. The weight factor matrices Q,R, which are design parameters, are readjusted. This control system is compared with LQI method and the results show that the suggested method is better than the traditional method in pressure difference control.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.473-476
• /
• 2008

USN(Ubiquotous Sensor Network) has been applied to various fields of industries such as logistics, environment management, traffic management, as well as IT industries including home network and telematics. Among the important techniques required to implement aforementioned applications, location management scheme is essential. In this paper, we proposed and implemented a new location measurement scheme based on RSSI of sensor node for campus car location management.

• Journal of the Korean housing association
• /
• v.24 no.2
• /
• pp.53-60
• /
• 2013

Recently, in Korea, single- or two-person households (50.5%) are becoming the primary family type due to increasing divorce rates, population aging, personal code of values and so on. Hence, small families will lead to a sudden increase of single- or two-person households. People searching for small houses are increasing because of the provision of officetels, one room and urban-life housing as well as economic recession. However, this has led to habitability problems, such as parking, storage space and decline in safety. In this study, we obtain the proper contents from LQI indicators of advanced research and use the indicators to evaluate the residential environment quality. We conduct a post-occupancy-evaluation (POE) survey and compare the habitability satisfaction level of apartment and officetel residents. According to the survey, officetel residents' satisfaction levels are low for the following factors in the order listed: ventilation, storage space, management expenses and facilities for children and the elderly.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.174-174
• /
• 2022

수질지수는 여러 수질 데이터 값을 수학적으로 결합하고 다 변수 특성을 줄여 수치 및 등급으로 나타낸 지표이다. 수질지수를 통해 수질을 평가하고 서로 다른 위치와 시간의 수역을 종합적으로 비교할 수 있으며 수자원관리에 있어 정책입안자, 의사결정자, 국민이 수질에 대해 일반적이고 쉽게 이해할 수 있다. 현재 환경부에서는 국내수질자동측정망 최근 12시간 데이터 값을 근거로 실시간수질지수 RTWQI(Real-Time Water Quality)값을 제공한다. 국내 호소에 설치된 수질 자동측정망은 총 8개소이며 매 시간 공통 항목인 수온, pH, DO, 전기전도도, TOC 5개, 선택항목인 탁도, Chl-a, TN, TP, 중금속, 생물감시항목 등 27개를 측정한다. RTWQI는 캐나다에서 2001년에 개발된 CCME WQI(Canadian Council of Ministers of the Environment Water Quality Index) 산출식을 기초하였으며 F1(기준치를 위반하는 수질항목의 개수/ 총 수질항목 개수), F2(기준치를 위반한 샘플들의 총 횟수/총 샘플횟수) F3(기준치를 위반한 정도) 3가지의 요소로 계산된다. 그러나RTWQI 산출식의 기초인 CCME WQI는 개발 이후 여러 문제점들은 개선되었으나 F1이 다른 F2, F3 보다 CCME WQI 점수의 기여도가 2배 이상 높은 문제점은 개선하지 못하였다. 본 연구에서는 수질자동측정망이 설치된 2012년 7월부터 2021년 12월 동안 매 시간 별 수질 데이터를 이용하였다. 또한 CCME WQI 문제점을 개선한 MWQI(Modification of Canadian water qaulity index)를 기초하여 실시간 수질지수를 재 산정하였다. 추가적으로 Pearson 상관관계 분석 및 추가 통계분석을 통해 환경부에서 제공하는 기존의 RTWQI, 개선된 실시간수질지수, 한국형 호소수질평가지수 LQI(Lake Water Quality Index)를 비교 및 평가하였다. 이러한 연구를 통해 정확성 높은 수질지수를 찾고 수자원 관리 정책 수립에 적극 활용 될 수 있을 것으로 사료된다.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.2
• /
• pp.43-53
• /
• 2017

This study aims to analyze the effect of typhoons on pear production. Pears are typical fruits that are vulnerable to typhoon damages, so typhoons are negatively associated with pear productivity. However, relatively less pear damages by typhoons in the main pear production area, comparing to the average in Korea, have been reported. The main production area seems to adopt better agricultural techniques or practices to cope with natural disasters such as typhoons. Thus, this study tests the hypothesis that there are differences of production losses due to typhoons between the main pear production area and the rest using the stochastic frontier analysis. The main production area is defined by Location Quotient Index (LQI), and we found that LQI had a significant effect to decrease the productivity losses in the main production areas, which shows that those production areas alleviated the pear production loss due to typhoons.