• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1280-1283
• /
• 2007

본 연구는 홀로그래픽 정보저장기기에서 트래킹 서보 제어를 통해 원하는 데이터를 정확하게 기록 및 재생하기 위한 LQG 제어기를 제안하고 검증하는 것을 목적으로 한다. 서보광이라는 추가적인 광을 사용할 것을 제안하여, 서보광과 참조광 간의 간섭에 의해 기록매체에 서보 신호를 얻을 수 있게 하는 홀로그램을 형성한다. 기록 및 재생과정에서 신호광이 기록, 재생됨과 동시에 서보광에 의한 서보 신호가 재생되고, 그 신호의 경로에 설치된 포토 다이오드로부터 디스크 형태에서 발생 할 수 있는 외란을 감지하게 된다. 감지된 외란 신호인 트래킹 에러 신호를 통해 참조광이 디스크의 정확한 위치에 조사되게 하기 위해 평판유리 액츄에이터를 사용한다. 이와 같은 서보 제어를 수행했을 경우 데이터 페이지가 정확하게 재생되며 SNR 과 BER 이 개선되는 것을 확인할 수 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.2007-2013
• /
• 1999

A Newly proposed control methodology applied to the aeroelastic system experiencing flutter is investigated and its performance is verified experimentally. The flexible cantilever beam slicked with piezofilm sensor and piezoceramic actuator is modelled in physical domain. Dynamic moment equation for the system is derived via Ito's stochastic differential equation and F-P-K equation. Also system's characteristics in stochastic domain is analyzed simultaneously. LQG controller is designed and used in physical and stochastic domain. It is shown experimentally that the vibration of beam is controlled effectively by designed LQG controller in physical domain. By comparing the result with that of LQG controller designed in stochastic domain, it is shown that the new control method, called Heo-stochastic control technique, has better performance as a controller.

• Nuclear Engineering and Technology
• /
• v.53 no.3
• /
• pp.851-859
• /
• 2021

Small PWR can be used for power generation and heating. Considering that small PWR has the characteristics of flexible operating conditions and complex operating environment, the controller designed based on single power level is difficult to achieve the ideal control of small PWR in the whole range of core power range. To solve this problem, a flexible switching controller based on fuzzy controller and LQG/LTR controller is designed. Firstly, a core fuzzy multi-model suitable for full power range is established. Then, T-S fuzzy rules are designed to realize the flexible switching between fuzzy controller and LQG/LTR controller. Finally, based on the core power feedback principle, the core flexible switching control system of small PWR is established and simulated. The results show that the flexible switching controller can effectively control the core power of small PWR and the control effect has the advantages of both fuzzy controller and LQG/LTR controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.71-75
• /
• 1991

This paper deals with designing a real-time fault and accommodation system. The LQG controller is adopted in the normal state and the output of LQG controller is corrected using Separated Bias Estimator in the faulty state. The proposed scheme has been applied to the two-tank control system and showed satisfactory performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.503-505
• /
• 1986

주어진 제어대상 모델에 대하여 제어기를 구성하여 실제로 적용하는 경우 모델의 불일치, 모델링에서 고려하지 않은 외란(disturbance), 측정잡음등에 의하여 성능이 설계시와 달라진다. 실제적용에서도 성능을 계속 유지하기 위하여 제어기는 안정성, 계수변화(parameter variation)에 대한 강인성(robustness), 외란상쇄(disturbance rejection) 및 측정잡음에 둔감함등의 특성을 가져야 한다. 귀환(feedback)을 사용하여 제어기를 구성하는 경우 위의 모든 조건을 만족 시킬 수 없으므로 제어목적에 따라 적당한 조건을 선정하여 중요한 특성을 주로 갖게 한다. 본 논문에서는 쌍동선(small waterplane area twin hull ship-SWATHS)에 대하여 PID, LQ, LQG 제어기를 구성하여 안정성, 계수 변화에 대한 강인성, 외란 상쇄 및 측정잡음의 영향을 비교하였다. 쌍동선의 경우 다른 단동선(mono hull ship)에 비하여 접수면(waterplane)이 적으므로 무게증변을 흡수할 수 있는 복원력이 약하여 적은 외력에도 상하동요(heave)와 종동요(pitch)가 심하게 일어난다. 이러한 동요를 줄이는 것이 쌍동선의 제어목적이다. 본 연구에서는 먼저 선형화된 수직축 운동방정식을 이용하여 선체운동의 모델을 구했으며 중첩의 원리(super-position theorem)에 의하여 주파수 응답의 합으로 파도입력을 모델링 하였으며 제어를 위하여 필요한 측정치는 IMU(Inertial Measurement Unit)에서 제공된다고 가정하였다. 쌍동선의 동요의 원인은 파도, 바람, 조류 등이 있으나 파도에 의한 영향이 가장 크므로 본 논문에서는 파도에 의한 영향만을 고려하였다. 파도는 쌍동선에 외란으로 작용하며 측정할 수 없는 양이므로 PID, LQ 제어에서는 제어모델에 포함되지 않지만 LQG 제어에서는 제어모델에 포함된다. LQG 제어의 경우 제어모델에 파도를 백색잡음으로 가정하고 제어기를 구성한 것 (LQG1)과 2차의 쉐이핑필터(shaping filter)를 사용하여 구성한 것(LQG2)으로 나누었다.

• Smart Structures and Systems
• /
• v.13 no.3
• /
• pp.473-500
• /
• 2014

Tuned mass dampers (TMDs) have been installed in many high-rise buildings, to improve their resiliency under dynamic loads. However, high-rise buildings may experience natural frequency changes under ambient temperature fluctuations, extreme wind loads and relative humidity variations. This makes the design of a TMD challenging and may lead to a detuned scenario, which can reduce significantly the performance. To alleviate this problem, the current paper presents a proposed approach for the design of a robust and efficient TMD. The approach accounts for the uncertain natural frequency, the optimization objective and the input excitation. The study shows that robust design parameters can be different from the optimal parameters. Nevertheless, predetermined optimal parameters are useful to attain design robustness. A case study of a high-rise building is executed. The TMD designed with the proposed approach showed its robustness and effectiveness in reducing the responses of high-rise buildings under multidirectional wind. The case study represents an engineered design that is instructive. The results show that shear buildings may be controlled with less effort than cantilever buildings. Structural control performance in high-rise buildings may depend on the shape of the building, hence the flow patterns, as well as the wind direction angle. To further increase the performance of the robust TMD in one lateral direction, active control using LQG and fuzzy logic controllers was carried out. The performance of the controllers is remarkable in enhancing the response reduction. In addition, the fuzzy logic controller may be more robust than the LQG controller.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.1912-1921
• /
• 1999

The equipments mounted on guided-missile undertake heavy vibrational disturbance. Sometimes the equipments mounted on guided-missile go wrong so that the guided-missile flies over unintended place. For the vibration isolation of the equipments mounted on guided-missile, active vibration control was performed. In the case of active vibration technique, the stiffness matrix and the mass matrix are derived based on FEM (ANSYS5.0). Model reduction was carried out and, as a result, we got 7 DOF mass and stiffness matrix. For the sake of FEM model identification, modal experiment was carried out. With the help of Sensitivity Analysis, the natural frequencies of FEM were tuned to those of Experiment. In this work, the Sky Hook and the LQG control theory were adopted for v iteration control using stacked piezoactuator. Experiments were performed with changing excitation frequency from 10 Hz upto 200 Hz and we got frequency response function of guided-missile equipments. The magnitude of 3rd mode of guided-missile equipments is 8.6 % that of Uncontrolled in Skyhook controller and is 3.4 % that of uncontrolled in LQG controller.

• International Journal of Automotive Technology
• /
• v.7 no.6
• /
• pp.749-756
• /
• 2006

This paper presents a complex stochastic wheelbase preview control method of a motorcycle suspension based on hierarchical modeling method. As usual, a vehicle suspension system is controlled as a whole body. In this method, a motorcycle suspension with five Degrees of Freedom(DOF) is dealt with two local independent 2-DOF suspensions according to the hierarchical modeling method. The central dynamic equations that harmonize local relations are deduced. The vertical and pitch accelerations of the suspension center are treated as center control objects, and two local semi-active control forces can be obtained. In example, a real time Linear Quadratic Gaussian(LQG) algorithm is adopted for the front suspension and the combination of the wheelbase preview and LQG control method is designed for the rear suspension. The results of simulation show that the control strategy has less calculating time and is convenient to adopt different control strategies for front and rear suspensions. The method proposed in this paper provides a new way for the vibration control of multi-wheel vehicles.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2267-2269
• /
• 2001

The looper control of hot strip finishing mill is one of the most important control item in hot strip rolling mill process. Loopers are placed between finishing mill stands and control the mass flow of the two stands. Another important action of the looper is to control the strip tension which influences on the width of the strip. So it is very important to control both the looper angle and the strip tension simultaneously but the looper angle and the strip tension are strongly interacted by each other. There are many control schemes such as conventional, non-interactive, LQ, LQG/LTR, and ILQ control in the looper control system. In this paper, we present the modeling for the looper of a hot strip finishing mill to control the tension of the strip and suggest the non-interactive(cross) and LQG/LTR control method.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.161-168
• /
• 1997

The present paper describes the vibration control experiment of composite plates with bonded piezoelectric sensor and actuator. The system is modeled as two degree-of-freedom system using modal coordinates and the system parameters are obtained from vibration tests. Kalman filter is adopted for extracting modal coordinates from sensor signal, and control algorithms applied to the system are Linear Quadratic Gaussian(LQG) control, Bang-Bang Control (BBC), Negative Velocity Feedback(NVF), Proportional Derivative Control(PDC). From observation of the spillover and control perfomance, it is concluded that a higher order control algorithm such as LQG rather than BBG, NVF, PDC is suitable for efficient simultaneous control of both bending and twisting modes of composite plates.