• 제목/요약/키워드: LPG(Liquefied petroleum gas)

검색결과 144건 처리시간 0.019초

LNG충전시설의 위험도 표현에 관한 연구 (A Study on Quantitative Risk Presentation of LNG Station)

  • 고재욱;유진환;김범수;이헌석;김민섭
    • 한국가스학회지
    • /
    • 제13권1호
    • /
    • pp.61-67
    • /
    • 2009
  • 국내에는 가스를 사용하는 에너지 산업시설(저장시설, 고압가스 배관, 충전소, 탱크로리 등)이 전국에 산재해 있다. 이러한 대형 가스 시설에서는 화재, 폭발 및 유독물질 누출 등 중대사고가 발생할 수 있다. 또한 대기오염을 줄이기 위한 천연가스자동차의 보급으로 LNG(Liquefied Natural Gas), CNG(Compressed Natural Gas) 충전소의 보급이 늘어나고 있는 추세이다. 부천에서 발생한 LPG(Liquefied Petroleum Gas) 충전소의 대형가스사고 이후 충전소의 설치는 많은 어려움이 따른다. 따라서 이 연구에서는 LCNG/LNG 복합충전소를 연구대상으로 선정하고 기존의 정성적 위험성평가의 결과를 토대로 정량적인 위험성 평가를 표현하고, HSE(Health and Safety Executive) 기준과 비교를 통한 위험성을 확인하고자 한다.

  • PDF

LPG 가연성 혼합물에 대한 고형 금지제의 억제 효과 (Inhibitory Effect of Solid Inhibitors on LPG Combustible Mixtures)

  • Hamdan, M. A.;Yamin, J. A.;Dabbas, R. K.
    • 대한화학회지
    • /
    • 제54권3호
    • /
    • pp.295-299
    • /
    • 2010
  • 액화석유가스-공기 불꽃에 대한 2가지 열적 금지제(즉, 돌가루, 탄산칼슘)의 억제효과를 연구하였다. 이를 위해 이들 금지제를 가하기 전과 후 가연성 혼합물의 가연성 한도를 측정하여 조사하였다. 그 결과, 탄산칼슘이 돌가루에 비해 억제 효과가 우수하였다.

저압 분사조건에 따른 직접분사 LPG의 분무 및 연소특성 연구 (An Study on Spray and Combustion Characteristics of Direct Injection LPG under Low Pressure Injection Condition)

  • 황성일;정성식;염정국;이진현
    • 한국가스학회지
    • /
    • 제20권1호
    • /
    • pp.52-61
    • /
    • 2016
  • 액화석유가스는 환경 친화적이며 에너지 효율성과 출력성능이 뛰어나 실용성이 높고, 경쟁연료에 비해 가격 경쟁력이 우수하기 때문에 촉망받는 대체연료 중 하나로 간주된다. 스파크점화 엔진에서 직분식 기술은 엔진 체적효율을 눈에 띄게 증가시키며, 상대적으로 더 높은 연소효율이 가능한 성층급기를 이용해 엔진을 작동시킨다. 본 연구에서는 가솔린직접분사 엔진의 원리를 적용하여 가시화 시스템을 장착한 연소실을 설계하였다. 이를 통해 스파크점화직분식 LPG의 점화성과 화염전파 과정을 디지털 방식으로 기록하고 분석하였다. 이러한 연구의 결과는 스파크점화직분식 LPG 엔진의 설계 및 최적화를 위한 광범위한 기초 자료로서 기여하고자 한다.

분사압력변화에 따른 액체 LPG 분무특성 -디젤분무와의 비교- (Liquid LPG Spray Characteristics With Injection Pressure Variation -Comparison with Diesel Spray-)

  • 임희성;박권하
    • 한국연소학회지
    • /
    • 제4권2호
    • /
    • pp.43-50
    • /
    • 1999
  • Liquefied petroleum gas (LPG) has been used as motor fuel due to its low emissions and low cost. The fuel feeding system has been improved with stringent requirement for exhaust emissions. LPG carburetion system was first introduced, then the system has been changed to a precisely controlled gas injection system, but this gas feeding system has a limitation on improving power output. In order to improve an engine performance, a multi-point port injection system was introduced recently, and a liquid direct injection system into a cylinder was suggested as a next generation system to maximize a fuel economy as well as a power. This study addresses the analysis of the LPG spray from diesel injectors. The spray images are visualized and compared with diesel sprays in a wide injection pressure range. The photographs show much wider dispersion of LPG sprays.

  • PDF

분사압력변화에 따른 액체 LPG 분무특성;디젤분무와의 비교 (Liquid LPG Spray Characteristics With Injection Pressure Variation;Comparison with Diesel Spray)

  • 임희성;박권하
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.21-26
    • /
    • 1999
  • Liquefied petroleum gas(LPG) has been used as motor fuel due to its low emissions and low cost. The fuel feeding system has been improved with stringent requirement for exhaust emissions. LPG carburation system was firstly introduced, then the system changed into a gas injection system controlled precisely, but those gas feeding system has a limitation on improving power output. In order to improve an engine performance, a multi-point port injection system was introduced recently, and a liquid direct injection system into a cylinder was suggested as a next generation system to maximize a fuel economy as well as a power. This study addresses the analysis of the LPG spray from diesel injectors. The spray images are visualized and compared with diesel sprays in a wide injection pressure range. The photographs show much wider dispersion of LPG sprays.

  • PDF

LOPA 및 SIF기법에 의한 LPG 인수기지의 안전성향상에 대한 연구 (Safety Enhancement of LPG Terminal by LOPA & SIF Method)

  • 이일재;김래현
    • Korean Chemical Engineering Research
    • /
    • 제53권4호
    • /
    • pp.431-439
    • /
    • 2015
  • 본 연구에서는 LPG(Liquefied Petroleum Gas) 인수기지에 대해 HAZOP(Hazard and Operability), LOPA(Layer of Protection Analysis) 및 SIL(Safety Integrity Level) 위험성 평가기법을 적용하여, 국내 LPG 인수기지 중 사고발생시 피해영향이 가장 큰 부탄 및 프로판 저장탱크를 중심으로, 사고위험성을 감소시킬 수 있는 방안을 고찰하였다. HAZOP 기법을 통해 잠재위험성을 분석하여 사고시나리오를 도출하고, 사고피해영향이 큰 시나리오를 선정하여 LOPA를 분석하였다. LOPA 분석시에는 해당시나리오에 대한 IPL(Independent Protection Layer)을 분석하여 완화된 결과의 빈도를 도출한 후, 설정된 위험성 허용기준($1.0{\times}10^{-05}$/년)에 대한 충족여부를 판단하였다. LOPA의 독립방호계층으로서 SIF(Safety Instrumented Functions)의 경제성을 분석하여 SIF가 현장의 특성에 맞는 IPL이 되도록 개선안을 제시하였다. 또한, 독립방호계층으로서 해당공정에 사용된 SIF의 수준을 분석해보고, SIF의 수준에 따라 공정의 사고발생빈도가 어느 정도 변화하는지를 당해 공정에서 도출된 사고시나리오를 중심으로 연구하였다.

액화석유가스 용기용 과류차단밸브의 개발에 관한 연구 (A Study on the Development of Overflow Cutoff Valve for Liquefied Petroleum Gas Cylinders)

  • 임종국
    • 한국안전학회지
    • /
    • 제20권2호
    • /
    • pp.158-161
    • /
    • 2005
  • 액화석유가스 용기용 과류차단 밸브의 개발에 관한 연구이다. 이 밸브는 베르누이 방정식과 뉴턴의 법칙을 응용하여 개발하였다. 이것은 기존의 밸브 하단에 모듈을 삽입함으로써 과류가 발생하면 모듈이 상승하여 모듈상단의 헤드에 부착된 차단변이 가스의 통로를 폐쇄함으로써 작동된다. 최근 가스 사용이 증가됨으로써 이에 따라 가스사고가 많이 발생되고 있다. 따라서 한국에서는 과류밸브의 사용을 의무화하고 있지만 아직 개발되지 않고 있다. 본 연구는 LP가스 용기용 밸브의 과류 발생시 자동 차단되는 밸브이다. 본 밸브가 채택된다면 많은 가스 사고로부터 벗어 날 수 있을 것이다.

점화시기가 LPG 엔진의 배기특성에 미치는 영향 (An effect of ignition timing on exhausting property of LPG Engine)

  • 한덕수;장영민;전봉준;김성준
    • 산업기술연구
    • /
    • 제26권A호
    • /
    • pp.39-46
    • /
    • 2006
  • As an automobile fuel, LPG has many environmental advantages compared to gasoline or diesel. However, current LPG engine which is provided with LPG fuel as gas form has lower power and worse fuel efficiency than gasoline engine. These problems of low power and bad fuel efficiency come from lower volumetric efficiency. Also there is a new rising problem of high failure ratio in an engine emission test. Although there are many factors which affect engine performance of exhaust gas emission, one believes that the fact that ECM of gasoline engine is used for LPG engine when retrofitting gasoline engine to LPG engine is one of the main problems, which lower engine power and emit more noxious gas due to wrong ignition timing. To solve these problems, one studied the effects of ignition timing on the exhaust gas to find out the optimum condition of ignition timing. The experimental results show that noxious exhaust gas is reduced and engine power is increased if the optimum control of ignition timing is applied in accordance to the revolution speed of engine.

  • PDF

Evaluation of Performance and Service Life of Low Pressure LPG Regulators for Home Use

  • Kim Young-Gyu;Cho Seok-Beom;Kim Pil-Jong;Kwon Boo-Kil
    • Journal of Mechanical Science and Technology
    • /
    • 제20권3호
    • /
    • pp.329-334
    • /
    • 2006
  • This paper presents the evaluation of LPG (Liquefied petroleum gas) regulators for home use. For the evaluation, several properties of the regulators were experimentally analyzed, such as the operation of safety device, the adjusting and lock-up pressure, the adjusting spring and the diaphragm, with respect to the used time of the regulators. Experimental results showed that the initial operation performances of regulators were degraded with increase of the service time and also showed that the degradation of the performance and material property could become serious after about six-year-use of the regulators.

액화석유가스 저장탱크로부터 발생하는 증발가스 재액화 공정의 최적화에 대한 연구 (An Optimization Study on the Reliquefaction of Boil-Off Gas from Liquefied Petroleum Gas Storage Tank)

  • 노상균
    • 한국수소및신에너지학회논문집
    • /
    • 제30권5호
    • /
    • pp.395-400
    • /
    • 2019
  • Comparative studies between single- and two-stage refrigeration cycle using propane as a refrigerant have been performed for a vapor recompression refrigeration cycle. PRO/II with PROVISION release 10.2 from AVEVA company was used, and the Soave-Redlich-Kwong equation of state model with Twu's alpha function was selected for the modeling and optimization of the refrigeration cycle for the reliquefaction of BOG coming out from the LPG storage tank. In two-stage refrigeraton cycle, 24.8% of compressor power was reduced compared to that of single-stage refrigeration cycle through the optimization works.