• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.755-757
• /
• 2009

Since the research of advanced terrestrial digital multimedia broadcasting system is still in progress, and in our previous paper, in which we introduced how to combine one conventional transmitted symbol with two additional bits to form a new symbol transmission, the bit error performance of LP bits is not realizable, because even we implemented the turbo code to protect the LP bits transmission, to obtain a certain good bit error probability, the value of $E_b/N_0$ cost highly. In this paper, we modified the composition of low-priority symbol and high-priority symbol, and through the system presented in previous paper we get a better simulation result of the LP symbol transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6A
• /
• pp.500-505
• /
• 2009

In this paper, We present a low complexity candidate list generation scheme in iterative MIMO receiver. Since QAM modulation can be decomposed into HP symbols and LP symbol and HP symbol is robust in error capability, we generate HP symbol list with simple ZF detector output and its corresponding neighbor HP symbols, Then, based on HP symbol list, the LP symbol list is generated by using the sphere decoder. From the second iteration, since apriori value from channel decoder is available, the candidate list is updated based on demodulated apriori value. Through the simulation, we observe that at the first iteration, the BER performance is worse than LSD. However, as the number of iteration is increased, the proposed scheme has almost same performance as LSD. Moreover, the proposed one has reduced candidate list generation time and lower number of candidate list compared with LSD.

• ETRI Journal
• /
• v.31 no.6
• /
• pp.795-802
• /
• 2009

This paper presents the design of an advanced terrestrial digital multimedia broadcasting (AT-DMB) baseband receiver SoC. The AT-DMB baseband is incorporated into a hierarchical modulation scheme consisting of high priority (HP) and low priority (LP) stream decoders. The advantages of the hierarchical modulation scheme are backward compatibility and an enhanced data rate. The structure of the HP stream is the same as that of the conventional T-DMB system; therefore, a conventional T-DMB service is possible by decoding multimedia data in an HP stream. An enhanced data rate can be achieved by using both HP and LP streams. In this paper, we also discuss a time deinterleaver that can deinterleave data for a time duration of 384 ms or 768 ms. The interleaving time duration is chosen using the LP symbol mapping scheme. Furthermore, instead of a Viterbi decoder, a turbo decoder is adopted as an inner error correction system to mitigate the performance degradation due to a smaller symbol distance in a hierarchically modulated LP symbol. The AT-DMB baseband receiver SoC is fabricated using 0.13 ${\mu}m$ technology and shows successful operation with a 50 mW power dissipation.

• ETRI Journal
• /
• v.37 no.1
• /
• pp.32-42
• /
• 2015

Orthogonal frequency-division multiplexing (OFDM) suffers from spectral nulls of frequency-selective fading channels. Linear precoded (LP-) OFDM is an effective method that guarantees symbol detectability by spreading the frequency-domain symbols over the whole spectrum. This paper proposes a computationally efficient and low-cost implementation for discrete Hartley transform (DHT) precoded OFDM systems. Compared to conventional DHT-OFDM systems, at the transmitter, both the DHT and the inverse discrete Fourier transform are replaced by a one-level butterfly structure that involves only one addition per symbol to generate the time-domain DHT-OFDM signal. At the receiver, only the DHT is required to recover the distorted signal with a single-tap equalizer in contrast to both the DHT and the DFT in the conventional DHT-OFDM. Theoretical analysis of DHT-OFDM with linear equalizers is presented and confirmed by numerical simulation. It is shown that the proposed DHT-OFDM system achieves similar performance when compared to other LP-OFDMs but exhibits a lower implementation complexity and peak-to-average power ratio.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.689-692
• /
• 2008

Hierarchical modulation has been considered for achieving higher data rates in Terrestrial-DMB(T-DMB) systems. And for achieving a higher data rates transmission, the low-priority (LP) data, which is used to carry additional data, such as video data, audio data and textual data, should be perfectly decoded in a certain value of $E_b/N_o$. Unfortunately, the man-made noise badly affects the high-priority (HP) symbol, which is used to carry the conventional data in the existed T-DMB system; and since the advanced T-DMB system is proposed to fit for the legacy T-DMB receivers, the low-priority symbols in the hierarchical modulation are much worse affected by the neighbors, who are both in the same quadrant. Because of the feature that mentioned previously, the turbo code has been considered to deal with the LP data. And due to the degradation which caused by the shortened symbol distance, the error performance of LP data is not sufficient by only using the turbo code. In this paper, we propose a Reed-Solomon code used outside of turbo code, and with the turbo code, it becomes a concatenated code. In this paper, there are some simulation results, within the comparison of those performances, we can see how a Reed-Solomon code is utilized for degradation of error performance which is caused by the hierarchical constellation, and how to design a Reed-Solomon code which is suitable for improving the degradation of error performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4C
• /
• pp.384-391
• /
• 2003

Blind channel identification and equalization attempt to identify the communication channel and to remove the inter-symbol interference caused by a communication channel without using any known trainning sequences. In this paper, we propose a blind adaptive channel identification and equalization algorithm with phase offset compensation for single-input multiple-output (SIMO) channel. It is based on the one-step forward multichannel linear prediction error method and can be implemented by an RLS algorithm. Phase offset problem, we use a blind adaptive algorithm called the constant modulus derotator (CMD) algorithm based on condtant modulus algorithm (CMA). Moreover, unlike many known subspace (SS) methods or cross relation (CR) methods, our proposed algorithms do not require channel order estimation. Therefore, our algorithms are robust to channel order mismatch.