• 제목/요약/키워드: LOx

Search Result 405, Processing Time 0.022 seconds

DentalVibe versus lignocaine hydrochloride 2% gel in pain reduction during inferior alveolar nerve block in children

  • Menni, Alekhya Chowdary;Radhakrishna, Ambati Naga;Prasad, M. Ghanashyam
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제20권6호
    • /
    • pp.397-402
    • /
    • 2020
  • Background: Inferior alveolar nerve block (IANB) is the most common, painful, and anxiety-provoking procedure involving needle insertion for anesthetic solution deposition. DentalVibeⓇ (DV) delivers vibration at a sustained frequency as a counter-stimulation to the site of injection, thereby alleviating pain. The aim of this study was to evaluate and compare the effectiveness of DV and lignocaine hydrochloride 2% gel (Lox 2% jelly) in pain reduction during IANB in children. Methods: A split-mouth randomized clinical trial was designed with a sample of 60 children (age, 6 to 12 years) requiring bilateral IANB for various dental procedures; DV was used while administering IANB and Lox 2% jelly was used as the topical anesthetic before administering IANB at subsequent appointments. During both appointments, pain perception was measured using the sound, eye, motor (SEM) scale and Wong-Baker faces pain rating scale (WBFPRS); oxygen saturation (SpO2) and pulse rate were measured using a pulse oximeter before, during, and after the IANB procedure. The obtained values were tabulated and subjected to statistical analysis. Wilcoxon test was used for intergroup comparison, and Friedman test, for intragroup comparison of measured variables at different treatment phases. Results: The medians and interquartile ranges of the WBFPRS scores recorded during the IANB procedure for DV and Lox 2% jelly were 2 (2-4) and 2 (0-2), respectively (P < 0.05). The SEM scale scores, mean SpO2, and pulse rate did not show any significant differences during the IANB procedure between both treatments. Conclusion: Both DV and Lox 2% jelly were found to be effective in pain reduction during IANB in children.

Biological Significance of Essential Fatty Acids/Prostanoids/Lipoxygenase-Derived Monohydroxy Fatty Acids in the Skin

  • Ziboh, Vincent-A.;Cho, Yunhi;Mani, Indu;Xi, Side
    • Archives of Pharmacal Research
    • /
    • 제25권6호
    • /
    • pp.747-758
    • /
    • 2002
  • The skin displays a highly active metabolism of polyunsaturated fatty acids (PUFA). Dietary deficiency of linoleic acid (LA), an 18-carbon (n-6) PUFA, results in characteristic scaly skin disorder and excessive epidermal water loss. Although arachidonic acid (AA), a 20-carbon (n6) PUFA, is metabolized via cyclooxygenase pathway into predominantly prostaglandin $E_2(PGE_2)$ and $PGF_{2{\alpha}}$, the metabolism of AA via the 15-lipoxygenase (15-LOX) pathway, which is very active in skin epidermis and catalyzes the transformation of M into predominantly 15S-hydroxyeicosatetraenoic acid (15S-HETE). Additionally, the 15-LOX also metabolizes the 18-carbon LA into 13S-hydroxyoctadecadienoic acid (13S-HODE), respectively. Interestingly, 15-LOX catalyzes the transformation of $dihomo-{\gamma}-linolenic$ acid (DGLA), derived from dietary gamma-linolenic acid, to 15S-hydroxyeicosatrienoic acid (15S-HETrE). These monohydroxy fatty acids are incorporated into the membrane inositol phospholipids which undergo hydrolytic cleavage to yield substituted-diacylglycerols such as 13S-HODE-DAG from 13S-HODE and 15S-HETrE-DAG from 15S-HETrE. These substituted-monohydroxy fatty acids seemingly exert anti-inflammatory/antiproliferative effects via the modulation of selective protein kinase C as well as on the upstream/down-stream nuclear MAP-kinase/AP-1/apoptotic signaling events.

액체로켓엔진용 산화제펌프 회전체의 하중 예측 (Thrust Estimation Acting on Rotor of LOX Pump for Liquid Rocket Engine)

  • 김대진;최창호
    • 한국추진공학회지
    • /
    • 제19권6호
    • /
    • pp.98-104
    • /
    • 2015
  • 회전체의 과도한 하중은 펌프의 손상이나 수명 감소의 원인이 된다. 이에 액체로켓엔진용 산화제펌프의 안정성 확보를 위해 펌프 회전체에 작용하는 하중을 상사 시험을 통해 예측하였다. 축방향 하중은 펌프 외부에 설치된 축추력 측정 장치를 통해 간접적으로 계측하였으며, 반경방향 하중은 볼류트의 압력 분포를 토대로 계산하였다. 그 결과, 펌프의 유량이 작을수록 축방향 하중과 반경방향 하중 모두 증가하는 것으로 확인되었다. 그러나, 하중의 크기가 크지 않아 펌프의 안정성에 영향을 끼치지 않을 것으로 예측되었다.

액체로켓의 산화제 매니폴드 내 유동해석을 위한 분사공 모델링 (Modeling of Injector Orifice for the Flow Analysis in LOX Manifold of Liquid Rocket)

  • 김학종;변영환;조원국;설우석;나양
    • 한국추진공학회지
    • /
    • 제8권2호
    • /
    • pp.1-9
    • /
    • 2004
  • 산화제 매니폴드 내부유동의 물리적 특성을 파악하기 위해. CAE 기법을 이용한 수치 해석적 연구를 수행하였다. 유동장의 물리적 특성을 충분히 해상해 내면서도, 유동해석의 계산비용을 절감하기 위한 방안으로 분사공에 대한 모델링 작업을 시도하였으며, 대규모 유동패턴을 정확히 예측해 내면서도 약 30%의 계산 비용의 절감을 얻을 수 있었다. 예분산판이 장착되지 않은 경우, 압력과 유량의 분포가 분사공 윗면에서 상당히 불균일하게 나타났는데, 이는 매니폴드 내에 존재하는 두 개의 대규모 유동 패턴에 기인한 것으로 생각된다.

연료 과농 가스발생기의 분사기 손상에 관한 연구 (Study of Injector Damage on Fuel-rich Gas Generator)

  • 문일윤;이광진;임병직;서성현;한영민;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2006년도 제26회 춘계학술대회논문집
    • /
    • pp.197-201
    • /
    • 2006
  • 액체산소와 케로신을 사용하여 연료 과농 조건에서 작동하는 30 ton급 로켓엔진용 가스발생기를 개발하는 과정에서 사용된 동축 와류형 분사기의 산화제 post에 발생한 열손상에 대한 연구가 진행되었다. 분사기의 열손상을 방지하기 위해 분사기는 내부 혼합 방식을 유지하면서 recess를 증가시키고 재순환영역을 최소화하여 재순환영역에서의 화염형성을 억제하는 방향으로 재설계 되었다. 축소형 규모의 연소시험에서 이러한 재설계를 통해 연료 과농 가스발생기용 동축 와류형 분사기의 산화제 post 열손상을 방지할 수 있음을 확인할 수 있었다.

  • PDF

30톤급 액체로켓엔진용 터보펌프 개발현황 (Development Status of a Turbopump for 30-ton Thrust Level of Engine)

  • 김진한;홍순삼;정은환;최창호;전성민
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제25회 추계학술대회논문집
    • /
    • pp.375-383
    • /
    • 2005
  • 본 논문은 국내 최초의 액체산소와 케로신을 사용한 액체로켓엔진용 터보펌프의 개발에 관하여 기술하였다. 개발 중인 터보펌프는 가스 발생기 형식의 30톤급 액체로켓엔진에 사용 가능하다. 본 터보펌프는 일축에 조립된 산화제펌프, 연료펌프, 충동형 터빈, Inter-propellant seal(IPS)로 구성되어 있다. IPS는 액체산소와 케로신이 상호작용을 하지 않도록 차단해주는 장치이다. 현재 모사매질(물 및 공기)을 사용하여 각 단품 및 시스템 성능시험을 마쳤으며 hot firing 시험이 대기 중에 있다.

  • PDF

가스메탄/액체산소를 추진제로 하는 인젝터 설계 및 설계 검증 (Design and Verification of a Injector using Gas Methane and LOx as Propellants)

  • 장지훈;민지홍;이양석;고영성;김선진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.877-880
    • /
    • 2011
  • 기체메탄/액체산소를 추진제로 사용하는 동축 스월/전단형 인젝터를 설계 및 제작하였다. 각 추진제의 오리피스 개수와 유입오리피스 후단의 형상 등은 상용 해석프로그램인 Fluent를 이용하여 유동해석을 수행한 결과를 바탕으로 결정하였다. 설계/제작된 인젝터는 수류시험을 통해 차압에 따른 설계유량을 측정하였고, 패터네이터를 이용하여 유량분포의 균일성을 확인하였다. 측정결과 설계 유량의 약10% 내외의 차이를 보였으며, 산화제 인젝터의 분무각은 $66^{\circ}$로 측정되었다.

  • PDF

막냉각을 고려한 로켓엔진 연소실 열전달 비정상 해석 (Transient Analysis on Heat Transfer of Rocket Engine Combustion Chamber Considering Film-cooling)

  • 하성업;문일윤;이수용
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.867-868
    • /
    • 2011
  • LOx/케로신 로켓엔진 연소시 연소실로 전달되는 열전달과 그에 따른 벽온도 변화를 비정상 해석하였다. 막냉각이 없는 경우와 연료 막냉각이 있는 경우를 계산하였으며, 연소실 내측의 대류, 복사는 로켓엔진에 대한 경험식을 이용하였고, 벽 내부의 전도는 2차원 축대칭의 형태로 수치해석 하였다. 본 해석을 통하여 막냉각 냉각효과에 의한 벽면 온도의 시간에 따른 변화, 최대온도 지점의 변화등을 분석하였다.

  • PDF

가스메탄/액체산소를 추진제로 하는 인젝터 설계 및 설계 검증 (Design and Verification of a Injector using Gas Methane and LOx as Propellants)

  • 장지훈;민지홍;이양석;고영성;김선진
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.658-661
    • /
    • 2011
  • 기체메탄/액체산소를 추진제로 사용하는 동축 스월/전단형 인젝터를 설계 및 제작하였다. 각 추진제의 오리피스 개수와 유입오리피스 후단의 형상 등은 상용 해석프로그램인 Fluent를 이용하여 유동해석을 수행한 결과를 바탕으로 결정하였다. 설계/제작된 인젝터는 수류시험을 통해 차압에 따른 설계유량을 측정하였고, 패터네이터를 이용하여 유량분포의 균일성을 확인하였다. 측정결과 설계 유량의 약 10% 내외의 차이를 보였으며, 산화제 인젝터의 분무각은 $66^{\circ}$로 측정되었다.

  • PDF

액체로켓엔진 산화제 배관 시스템 전산유동해석 (Computational Analysis of an LOx Supply Line System of an Liquid Rocket Engine)

  • 문인상;문일윤;이수용
    • Journal of Astronomy and Space Sciences
    • /
    • 제26권4호
    • /
    • pp.693-702
    • /
    • 2009
  • 액체로켓엔진의 구성품 중 하나인 산화제 라인 시스템의 3차원 모델과 유동해석을 수행하였다. 전체 시스템의 유동해석에 앞서 각 구성품들의 개별적인 유동해석과 단순화된 모델을 통해 최적의 위치를 결정하였다. 그 결과 가스발생기 라인의 입구는 압력보상이 필요하며 오리피스의 위치에 따라 출구 유동의 형태가 달라지는 것을 확인할 수 있었다. 전체적으로 해석된 라인 시스템은 주어진 요구조건을 만족하는 것으로 나타났으며 이는 실제 제품 제작과 시험을 통해 확인할 예정이다.