• 제목/요약/키워드: LINE

검색결과 40,184건 처리시간 0.053초

전후동력 새마을호 철도차량의 탈선가능성에 관한 실험적 연구 (Experimental Study on Derailment of a Push-Pull Saemaeul Passenger Car)

  • 함영삼;최성규;오택열
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2000년도 추계학술대회 논문집
    • /
    • pp.243-249
    • /
    • 2000
  • This experimental study is shows speed-up possibility for the conventional railway vehicle. We appraise derailment coefficient then increase the velocity of the kyungbu line, honam line, changhang line, kyungjeon line.

  • PDF

Construction of an Oil Pump Rotor Production Line with High Productivity

  • Akiyama, Kazunari
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
    • /
    • pp.1278-1279
    • /
    • 2006
  • New product line with additional secondary operation of oil pump rotor was built in necessity of increasing capacity. This new line includes steam treatment process after sizing. The new line achieved 1.6 times higher performance compared with a conventional line.

  • PDF

Growth Performance of Offspring from Selected and Non-Selected Brood Line of Red Sea Bream, Pagrus major

  • Noh, Choong-Hwan;Hong, Kyung-Pyo;Myoung, Jung-Goo;Kim, Jong-Man
    • 한국양식학회:학술대회논문집
    • /
    • 한국양식학회 2003년도 추계학술발표대회 논문요약집
    • /
    • pp.36-36
    • /
    • 2003
  • In the present study, growth performances of the offspring from selected brood line were compared to those of the offspring from non-selected brood line of red sea bream. Offspring groups were mass produced separately from two brood lines, selected and non-selected Korean strain. Selected brood line have been selected by fish size for four generations (upper 5∼30% per generation) and non-selected brood line is the second generation of wild population at south sea in Korea. There's no significant difference in body length between offspring from selected and non-selected brood line during early growing stage (until 96-days old). However, offspring from selected brood line had superior body weight growth than offspring from non-selected brood line. At sea cages rearing trials with communal stocking, Offspring from selected brood line showed significantly better performance in body weight, body length, weight gain, specific growth rate and feed consumption (but not in feed conversion ratio) than offspring from non-selected brood line. At 24 months old, offspring from selected brood line grew faster 1.10 times in body length and 1.41 times in body weight than offspring from non selected brood line. The response to selection when compared to a non-selected line is on average of 10% in weight per generation at 24 months old.

  • PDF

총체적 심미 악안면 성형수술 : I. 상하악 악교정 수술을 위한 새로운 연조직 심미기준선 (TOTAL ESTHETIC ORTHOGNATHIC SURGERY : I. NEW ESTHETIC LINES AND INTER-ESTHETIC LINE ANGLE)

  • 정필훈;송민석
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제15권4호
    • /
    • pp.329-337
    • /
    • 1993
  • Improvement of orthognathic surgical techniques make it possible to design esthetic surgical correction for total esthetic face. In order to find the esthetic line which guide esthetic surgical correction in patients of orthognathic surgery, cephalometric soft tissue analysis of esthetic faces were performed. In esthetic Korean young adults, 25 males and 25 females who were within 1 S.D. of E-line, ANB, P/A facial height ratio, were analyzed in natural position keeping their face eye level. 1. Sn position is constant in males and females. The Sn-N'-N' Vertical plane angle is $5.3^{\circ}$ in both sexes. Sn is positioned in front of 5 mm in female 7 mm in male from the N' vertical plane. 2. The Sn-Ls line make constant angle to horizontal plane with $72.5^{\circ}$ in both sexes, which is called "upper esthetic line". The Ls-Pg' line makes constant angle to $72.4^{\circ}$ (range $72.2^{\circ}$ in female to $72.6^{\circ}$ in male), which is called "lower esthetic line". 3. When inter-esthetic line angle (the Sn-Ls line to Ls-Pg' line) has $144.9^{\circ}$, lower third face has esthetic upper and lower lip. 4. In treatment planning, Sn is first corrected in proper position, and then upper and lower esthetic line are established with the angle of 144.9. The maxilla is moved to tangent Ls to the upper esthetic line, and mandible is moved to tangent Li and Pg' to the lower esthetic line, according to the "y"-shaped esthetic lines, then lower third face showes esthetics.

  • PDF

비트라인 트래킹을 위한 replica 기술에 관한 연구 (Replica Technique regarding research for Bit-Line tracking)

  • 오세혁;정한울;정성욱
    • 전기전자학회논문지
    • /
    • 제20권2호
    • /
    • pp.167-170
    • /
    • 2016
  • 정적 램의 비트라인을 정밀하게 추적하는 감지증폭기의 enable 신호를 만들기 위해 replica bit-line 기술 (RBL)이 사용된다. 하지만, 공정으로 인한 문턱전압의 변화는 replica bit-line 회로에 흐르는 전류를 변화시키고 이는 감지증폭기의 enable 신호 생성 시간 ($T_{SAE}$)을 변화시키며, 결과적으로는 읽기 동작을 불안정하게 한다. 본 논문에서는 conventional replica bit-line delay ($RBL_{conv}$)구조 및 $T_{SAE}$ 변화를 감소시킬 수 있는 개선 구조인 dual replica bit-line delay (DRBD)구조와 multi-stage dual replica bit-line delay(MDRBD)구조를 소개하고, 14nm FinFET 공정, 동작전압 0.6V에서 각 기술들에 대한 읽기 성공률이 $6{\sigma}$를 만족하는 최대 on-cell 개수를 simulation을 통해 찾고 이때 각 구조에 대한 performance와 에너지를 비교했다. 그 결과, $RBL_{conv}$ 대비 DRBD와 MDRBD의 performance는 각각 24.4%와 48.3% 저하되고 에너지 소모는 각각 8%와 32.4% 감소된 것을 관찰하였다.

인공전송선로를 이용한 결합선로 방향성 결합기 (Coupled-Line Directional Coupler Using Artificial Transmission Line)

  • 심경섭;황희용
    • 한국전자파학회논문지
    • /
    • 제26권11호
    • /
    • pp.960-965
    • /
    • 2015
  • 본 논문에서는 인공전송선로 중 LUC(Low-pass filter Unit Cell) 구조를 이용한 결합선로 방향성 결합기를 제안한다. 일반적인 결합선로 결합기는 ${\lambda}/4$ 길이의 전송 선로를 사용하므로 소형화에 한계가 있다. 반면에 제안한 결합기는 $90^{\circ}$보다 아주 작은 두 결합선로 사이에 위상 지연선로를 삽입하여 전체적으로 $90^{\circ}$보다 작게 결합기를 구현했고, 일반적인 전송선로의 특성을 특정 주파수 내에서 만족하는 인공전송선로를 이용하여 결합기에 위상 지연선로를 구성함으로써 물리적 크기를 감소시켰다. 중심주파수 700 MHz에서 -10 dB의 결합량 특성을 갖는 방향성 결합기를 설계 및 제작, 측정하였다. 측정된 결과는 기존 결합기와 비슷한 성능을 보였다. 반면, 제작한 결합기의 결합선로는 기존 결합기의 약 45% 크기를 가지고 있다.

Third-line Hormonal Therapy to Treat Prostate Cancer Relapse after Initial and Second-line Hormonal Therapy: Report of 52 Cases and Literature Review

  • Matsumoto, Kazuhiro;Hagiwara, Masayuki;Hayakawa, Nozomi;Tanaka, Nobuyuki;Ito, Yujiro;Maeda, Takahiro;Ninomiya, Akiharu;Nagata, Hirohiko;Nakamura, So
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제15권8호
    • /
    • pp.3645-3649
    • /
    • 2014
  • The aim of this study was to evaluate the efficacy of third-line combined androgen blockade (CAB) therapy for castration-resistant prostate cancer that relapsed after primary and second-line CAB. We retrospectively reviewed the medical records of 52 patients who received first-, second-, and third-line CAB therapy (medical or surgical castration, plus steroidal antiandrogen of chlormadinone acetate, or nonsteroidal antiandrogen of flutamide or bicalutamide). For cumulative analysis, we searched the PubMed database and identified a total of 50 cases published in English. Including our cases, this provided a total of 102 cases for analysis. In our study cohort, 11 cases (21.2%) achieved more than 50% reduction of serum prostate-specific antigen (PSA) on initiation of third-line CAB. We found that third-line CAB with nonsteroidal antiandrogen after second-line CAB with steroidal antiandrogen exhibited favorable results, with a positive response in six of 13 patients (46.2%). Cumulative analysis findings were comparable. Regarding the timing of third-line CAB administration, 15 patients had started at a PSA equal to or less than 4.0 ng/ml, and eight of them (53.3%) showed a positive response to treatment, compared to only three of 37 patients (8.1%) whose PSA at the initiation of third-line therapy was higher than 4.0 ng/ml (p<0.001). We conclude that third-line CAB with nonsteroidal antiandrogen would be particularly useful for patients whose cancer progressed after second-line CAB with steroidal antiandrogen. The timing of treatment seems to be important because the higher the PSA at the start of third-line therapy, the lower the PSA response rate.

뜸줄 길이가 패류껍질어구의 유실에 미치는 영향 (Effect of length of buoy line on loss of webfoot octopus pot)

  • 이건호;조삼광;차봉진;정성재
    • 수산해양기술연구
    • /
    • 제52권4호
    • /
    • pp.299-307
    • /
    • 2016
  • This study aims to investigate effects of the length of the buoy and sand bag line on the loss of webfoot octopus pot. A numerical modeling and simulation was carried out to analyze the process that the pot gear affected by wave using the mass spring model. Through the simulation, tensions of sand bag line under various condition were investigated by length of buoy and sand bag line. The drag force and coefficient k of an artificial shell used in the webfoot octopus pot was obtained from an experiment in a circular water channel, and the coefficient k was applied to the simulation. To verify the accuracy of the simulation model, a simple test was conducted into measuring a rope tension of a hanging shell under flow. Then, the test result was compared with the simulation. The lengths of the buoy line in the simulation were 1.12, 1.41, 1.80, 2.23, 2.69, and 3.17 times of water depth. The lengths of sand bag line were 10, 20, 30, and 40 meters, and conditions of water depth were 8, 15, 22 meters. 4 meter height and 8 second period of wave were applied to all simulations. As a results, the tension of the sand bag line was decreased as the buoy and sand bag line were increased. The minimum tension of the sand bag line was appeared in conditions that the length of the buoy line is twice of water depth and the sand bag line length is over 40 meters (except in case of depth 8 meters.).

온라인 의류 점포유형에 따른 점포속성 중요도 (The Importance of On-line Store Characteristics Depending on On-line Store Type)

  • 김은숙;김미영
    • 한국의류학회지
    • /
    • 제31권8호
    • /
    • pp.1310-1320
    • /
    • 2007
  • This study investigated the differences in the importance of store characteristics depending on on-line clothing store type and consumer age. The questionnaires were given to female residents in the ages between 20-39 in Seoul and Kyung-gi province during October 2006. The results were summarized as follows: 1. By analyzing the differences in importances of on-line store characteristics factors it was found that buying process service factor and product searching system factor were important in on-line general merchandise store. and buying process service factor and product factor(all the factors, such as store credit, product, screen-displayed design, searching and approaching system, customer management service) were important in on-line specialty store. 2. By analyzing the differences in importances of on-line store characteristics depending on the store type, buying process system such as refund policy, shipping, high-speed payment and rapid searching, screen-displayed design system, approaching and searching system were more important in on-line general merchandise store when comparing to specialty store. It also showed that the consumer considered the reputation of the store and its image more important in on-line general merchandise store. 3. By analyzing the differences in of on-line clothing store importance depending on age, in the case of on-line general merchandise store, it showed that people in their thirties regarded buying process service factor more important than twenties, and when it came to the product and searching system, it was vice versa. Twenties had a tendency to consider the aspect of product important and, relatively, thirties regarded searching and approaching system factor important. in the case of specialty store. It was found that women in their twenties had a tendency to consider product factor more important.

송전선로의 이용률 평가 및 합리적 운영에 관한 연구 (A Study on Utilization Ratio and Operation of Transmission Lines)

  • 김동민;배인수;조종만;김진오
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제55권10호
    • /
    • pp.426-432
    • /
    • 2006
  • This paper describes the concepts of Static Line Rating (SLR) and Dynamic Line Rating (DLR) and the computational methods to demonstrate them. Calculation of the line capacity needs the heat balance equation which is also used for computing the reduced tension in terms of line aging. SLR is calculated with the data from the worst condition of weather throughout the year. Even now, the utilization ratio is obtained from this SLR data in Korea. DLR is the improved method compared to SLR. A process for DLR reveals not only improved line ratings but also more accurate allowed line ratings based on line aging and real time conditions of weather. In order to reflect overhead transmission line aging in DLR, this paper proposes the method that considers the amount of decreased tension since the lines have been installed. Therefore, the continuous allowed temperature for remaining life time is newly acquired. In order to forecast DLR, this paper uses weather forecast models, and applies the concept of Thermal Overload Risk Probability (TORP). Then, the new concept of Dynamic Utilization Ratio (DUR) is defined, replacing Static Utilization Ratio (SUR). For the case study, the two main transmission lines which are responsible for the north bound power flow in the Seoul metropolitan area are chosen for computing line rating and utilization ratio. And then line rating and utilization ratio are analyzed for each transmission line, so that comparison of the present and estimated utilization ratios becomes available. Finally, this paper proves the validity of predictive DUR as the objective index, with simulations of emergency state caused by system outages, overload and so on.