• Journal of Korean Society on Water Environment
• /
• v.26 no.3
• /
• pp.432-438
• /
• 2010

LIDMOD2 was developed for evaluation of low impact development (LID) and best management practice (BMP) by modification of Site Evaluation Tool (SET). The modification includes employment of SCS-CN method for annual runoff simulation, unit load method for annual pollutant loads simulation, and the method proposed by Korean TMDL for calculating pollutant reduction by BMPs. The CN values were updated with regionalized parameters within Nack-Dong River basin because these are important parameters for simulating hydrology. LIDMOD2 was tested by applying to Andong Bus terminal. As a simulation results, pollutant loads and surface runoff will be significantly increased by post-development without LID compared with those from pre-development. LID technique was simulated to efficiently reduce surface runoff and pollutant load and increase infiltration. LIDMOD2 is screening level tool and easy to use because LIDMOD2 is based on spread sheet and most of parameters are regionalized. LIDMOD2 was illustrate that it could evaluate LID well by summarizing and graphing annual hydrology, annual pollutant loading, and hydrograph for event storm. The calculation methods related with pollutant loads are employed from the guideline of Korean TMDL and it can be useful tool for Korean TMDL to evaluate the effect of LID/BMP on developing area.

• Journal of Wetlands Research
• /
• v.19 no.3
• /
• pp.259-270
• /
• 2017

In this study, field-scale half-saturated bio-filter wetland equipped with recirculation system was operated with stormwater from the paved road, and its operational performance and functions of LID-BMP were analyzed and compared with other facilities. The reduction of TSS, COD, TN, and TP were 92%, 63%, 36%, and 75%, respectively. Comparison of the reduction efficiency were carried out with respect to ratio between surface and catchment areas(SA/CA). In addition, this LID-BMP facility can reduce about 70% of pollutant by treating only 18% of total rainfall runoff. The results show that LID used for this study gave similar efficiency although its ratio was smaller. In addition, comparison study was made between synthetic fiber as a filter media and organic media, which shows that there was not any significant difference between, TSS and TP reduction, but there were large difference in COD and TN removal due to the presence and absence of release of organic carbon. Meanwhile, wetland system in this study equipped with a first-flush capture gave a higher stability in terms of treatment performance.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.539-539
• /
• 2012

최근 미국 환경부에서는 국가 환경 정책으로써 LID(Low Impact Development)를 대안 책으로 제시하고 있으며 우리나라에서도 최근 LID기법 연구가 활발히 진행 되고 있다. LID란 기존의 집중식 BMP처럼 유출 발생 후 처리를 다루는 방식의 기법이 아닌 발생원 단계에서의 처리에 초점을 맞춘 기법이다. 환경적 측면에서 다양한 기능을 가능하게 할 수 있는 LID기법 적용에 따른 효과를 알아보기 위해 전 세계적으로 SWMM 모형이 많이 사용되고 있지만 SWMM 모형 내 유량 및 수질에 따른 자동 보정 툴이 존재하지 않고 유역에 적합한 최적의 LID 기법 구조물의 설계 기준을 정할 수 있는 툴이 존재하지 않기 때문에 보다 효율적인 유역의 수문 보정 및 LID 기법 적용에 따른 효과 모의를 제공하지 못한다. 따라서 본 연구에서는 SWMM 5.0 버전 내 SWMM LID auto-calibration tool을 PARASOL 알고리즘을 기반으로 개발하였다. 또한 개발된 PARASOL 알고리즘 기반 SWMM LID auto-calibration tool을 이용하여 경기도 경안천 유역에 적용하였고 2011년 일별 실측 수문자료와 비교 분석 하였으며 경기도 경안천 유역에 맞는 최적의 LID기법을 산정하였다. 본 연구에서 개발 된 SWMM auto-calibration tool은 SWMM 모형의 유량 및 수질을 자동으로 보정하기 때문에 보다 효율적인 모형의 보정을 사용자에게 제공해 줄 수 있을 것이며 유역에 적합한 최적의 LID 기법 구조물 설계를 제시해 줄 수 있기 때문에 향후 LID 기법을 이용한 도시개발 계획에 유용하게 사용될 수 있을 것으로 판단된다. 향후 PARASOL 알고리즘 뿐만이 아닌 GLUE, SUFI-2, GA 등 다양한 알고리즘이 추가된 SWMM LID auto-calibration tool 을 개발 중에 있다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.355-355
• /
• 2022

기후변화에 의한 이상가뭄 발생 등을 대비하기 위한 비상용수 또는 대체수자원으로서의 지하수 개발수요가 증가하는 추세에 따라 기저유량 확보 및 수질 개선 방안을 수립하는 것은 지속가능한 수자원 이용·관리 측면에 있어서 매우 중요하다. 지하수 및 기저유량 확보 및 수질 개선을 위해서는 지표-지하수 통합 관리가 필요하며 이를 기반으로 지하수 및 기저유량 변동에 대한 인과관계 파악 및 구체적인 조사가 필요하다. 따라서 본 연구에서는 지표-지하수에 대한 계절적·시공간적 변동성을 잘 모의할 수 있는 통합 모델을 기반으로 지하수위 변동을 포함한 물수지 분석과 장·단기 유출해석이 정량적으로 분석하고자 하였으며, 평창군 대화면, 만대지구, 신둔천 유역을 대상으로 간벌, BMP, LID를 비롯한 다양한 시나리오에 따른 기저유량 및 수질변화 그리고 오염특성 파악을 수행하였다. 본 연구에서는 지표-지하수 통합 모델링을 위하여 SWAT-MODFLOW 모형을 활용하였으며, 간벌 시나리오의 경우 모형 Source code를 수정하여 간벌의 효과를 모의할 수 있도록 수정하였다. 또한 BMP와 LID의 경우 각 HRU별로 저감시설에 대한 효율 및 매개변수 조정을 통해 효율을 모의하였다. 모형의 입력자료 구축을 위하여 지표 모형의 경우 DEM, 토지이용도, 토양도를 활용하였으며, 지하수 모형의 경우 지하수기초조사자료에 수록된 수리전도도, 비산출율, 비보유율 조사결과를 활용하여 입력자료를 구축하였다. 그 결과 간벌시나리오의 경우 건기시 최소 6.7% 이상의 하천유량, 22.56% 이상의 기저유량, 그리고 0.3 m 이상의 지하수위 확보가 가능한 것으로 나타났다. BMP의 경우 유역면적의 약 7%에 BMP가 설치된 것으로 나타났으며, 이에 따른 하천 말단 SS저감효율은 6.7%로 나타났으나 유량에서는 큰 차이를 나타내지 못하였다. 마지막으로 LID시나리오의 경우 적용 소유역의 강우시 평균유량이 약 29% 감소하였으며 건기시 평균 기저유량이 약 44%이상, 평균 BFI는 약 0.13 증가한 것으로 나타났다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.444-447
• /
• 2012

주차장에서 발생하는 비점오염을 저감하기 위한 대책이 필요할 것으로 전망됨에 따라 최적관리기법(Best Management Practices, BMP) 또는 저영향개발(Low Impact Development, LID)과 같은 관리방안을 적용하여 강우에 의해 발생되는 강우유출수와 비점오염물질을 동시에 저감하는 연구가 수행되고 있다. 기존 연구사례들에서는 대상유역에서 발생된 강우유출수에 대한 모니터링을 수행을 통해 얻은 자료를 이용하여 비점오염물질 배출량을 산정하였지만, 이러한 방법은 다양한 강우사상에 따른 유출량을 직접 산정할 수 없으며, 미계측 유역에 활용하는데 있어서는 제약이 따르는 한계를 가지고 있다. 본 연구에서는 강우유출수 개선모형으로 국내 외에서 강우유출수의 모의와 저감시설의 성능평가에 많이 사용되고 있는 MUSIC(Model for Urban Stormwater Improvement Conceptualization) 모형과 SWMM(Storm Water Management Model) 모형을 이용하여 주차장 BMP 설치에 따른 저감효과를 산정하기 위해 주차장에 적합한 대상 BMP(식생수로, 통로화분, 투수성 포장)을 선정하고, 이를 강우유출수 개선모형의 BMP 모듈을 통해 모의하여 저감효과를 산정하는 방법론을 제시하고자 한다. BMP별 저감효과는 통로화분, 투수성 포장, 식생수로 순으로 나타났으며, 모형의 초기우수현상 재현성이 BMP설치에 따른 저감효과에 큰 영향을 미치는 것으로 파악되었다.

• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.382-390
• /
• 2018

In this study, the LIDMOD3 was developed to design and evaluate low impact development (LIDMOD). In the same fashion, the LIDMOD3 employs a curve number (NRCS-CN) method to estimate the surface runoff, infiltration and event mean concentration as applicable to pollutant loads which are based on a daily time step. In these terms, the LIDMOD3 can consider a hydrologic soil group for each land use type LID-BMP, and the applied removal efficiency of the surface runoff and pollutant loads by virtue of the stored capacity, which was calculated by analyzing the recorded water balance. As a result of Model development, the LIDMOD3 is based on an Excel spread sheet and consists of 8 sheets of information data, including: General information, Annual precipitation, Land use, Drainage area, LID-BMPs, Cals-cap, Parameters, and the Results. In addition, the LIDMOD3 can estimate the annual hydrology and annual pollutant loads including surface runoff and infiltration, the LID efficiency of the estimated surface runoff for a design rainfall event, and an analysis of the peak flow and time to peak using a unit hydrolograph for pre-development, post-development without LID, and as calculated with LID. As a result of the model application as applied to an apartment, the LIDMOD3 can estimate LID-BMPs considering a well spatical distributed hydroloic soil group as realized on land use and with the LID-BMPs. Essentially, the LIDMOD3 is a screen level and simple model which is easy to use because it is an Excel based model, as are most parameters in the database. This system can be expected to be widely used at the LID site to collect data within various programmable model parameters for the processing of a detail LID model simulation.

• Journal of Wetlands Research
• /
• v.23 no.1
• /
• pp.67-73
• /
• 2021

As the impermeable area increases due to urbanization and industrialization, the influence of non-point pollutants caused by rainfall runoff on the water system is increasing. In the past, the best management practices(BMP) were used a lot to manage non-point pollutants, but recently, technology that naturally treats them through LID (Low Impact Development) technology is widely used. In this study, various rainfall events were simulated through the SWMM model based on the data of rainfall monitoring in bioretention among natural facilities. The characteristic of LID modeling research is that it is difficult to build accurate modeling data with short-term data because real data is the result obtained through natural facilities, and it is difficult to implement an accurate model. In this study, the data monitored for 3 years It is significant in that it has built a precise model. The actual data monitored a total of 18 times was simulated, and the inflow and outflow and the removal efficiency of five pollutants were simulated. As a result of performing the performance evaluation, most of the 7 items showed excellent indicators, and the TN and TP showed relatively low simulation performance. In the future, it is expected that Korea will introduce an integrated water management system in which the water supply system and the sewage system are substantially integrated and operated. Therefore, the results of this study are considered to play an important role in the initial stage of rainfall management in the future integrated water management system, and the extent of rainfall runoff reduction and pollutant reduction in the expected installation area can be predicted in advance. This is expected to prevent overdesign of bioretention.

• Journal of Korean Society on Water Environment
• /
• v.28 no.5
• /
• pp.676-685
• /
• 2012

As impermeable layer continues to increase with the urbanization process, direct input of nonpoint source pollutants into water bodies via stormwater has caused serious effects on the aquatic ecosystem. Potential applications of rain gardens are increasing not only as best management practices (BMP) for reducing the level of nonpoint source pollutants but also as an ecological engineering alternative for low impact development (LID). In this study, remediation performance of various planting types, such as a mixed planting system with shrubs and herbaceous plants, was assessed quantitatively to effectively manage stormwater and increase landscape applicability. The mixed planting system with Rhododendron lateritium and Zoysia japonica showed the highest removal performance of $76.9{\pm}7.6%$ and $58.4{\pm}5.0%$ for total nitrogen and $89.9{\pm}7.9%$ and $82.4{\pm}5.2%$ for total phosphorus at rainfall intensities of 2.5 mm/h and 5.0 mm/h, respectively. The mixed planting system also showed the highest removal performance for heavy metals. The results suggest that a rain garden with the mixed planting system has high potential applicability as a natural reduction system for nonpoint source pollutants in order to manage stormwater with low concentrations of pollutants and will increase water recycling in urban areas.

• Journal of Korean Society on Water Environment
• /
• v.27 no.5
• /
• pp.580-586
• /
• 2011

Low impact development (LID) technique is recently proposed as new concept to reduce surface runoff and pollutant loading with various best management practices (BMPs). In this study, LIDMOD2, which is one of the model to evaluate LID, was applied at Mohyeon developing area to evaluate the redcution of annual runoff and pollution loading, cost-reduction efficient by LID with design of structural BMPs including bioretention, wet pond, and wetland. As a simulation results, the bioretention had the highest reduction efficiency for runoff (41.43%), and 22% for T-N and 22% for BOD. Wet pont had the highest reduction efficiency for T-P as showing 25% of reduction rate. As a results of cost-reduction efficient, wet pont represented the highest cost-effective for T-N and BOD with showing 0.43 T-P kg/million won and 17.37 BOD kg/million won, respectively, and bioretention represented the highest cost-effective for T-P with showing 2.52 T-P kg/million won. LID technology could reduce effectively surface runoff and nonpoint source pollution and construct sustainable development. LIDMOD2 could be suggested as useful tool to evaluate and design LID.

• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.562-569
• /
• 2016

Recently, Low Impact Development (LID) is being used in Korea to control urban runoff and nonpoint source pollution. In this study, we evaluated the reduction of surface runoff from a study area, as the effect of connecting three bioretention as LID-BMP. Surface runoff and storage volume of bioretention is estimated by the Curve Number (CN) method. In this study, the storage volume of bioretention is divided by the volume of surface runoff and precipitation which directly enters the bioretention. The ratio of captured surface runoff volume to storage volume is highly influenced by the ratio of drainage area to surface area of bioretention. The high bioretention surface area-to-drainage area ratio captures more surface runoff. The ratio of 1.2 captures 51~54% of the total surface runoff, ranging from 5-30cm of bioretention depth; a ratio of 6.2 captures 81~85%. Three connected bioretentions could therefore captures much more runoff volume, ranging from $35.8{\sim}167.3m^3$, as compared to three disconnected bioretentions at their maximum amount of precipitation with non-effluent from the connecting three bioretentions. Hence, connecting LID-BMPs could improve the removal efficiencies of surface runoff volume and nonpoint source pollution.