• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.5
• /
• pp.76-81
• /
• 2012

The continuing demand for increasingly slimmer and brighter liquid crystal display(LCD) panels has led to an increased focus on the role of the light guide panels(LGPs) or optical films that are used to obtain diffuse, uniform light from the backlight unit(BLU). And the most basic process in the production of such BLU components is the micromachining. LCD BLUs comprise various optical elements such as a LGP, diffuser sheet, prism sheet, and protector sheet with micro patterns. High aspect ratio patterns are required to reduce the number of sheets and enhance light efficiency, but there is a limit to the aspect ratio achievable for a given material and cutting tool. Therefore, this study comprised a series of experimental evaluations conducted to determine the machining feasibility in microcutting various aspect ratio patterns on electroless nickel plated die materials when using single-crystal diamond tools. Cutting performance was evaluated at various cutting speeds and depths of cut using different machining methods and machine tools.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1049-1052
• /
• 1999

We present a use. interface(UI) simulator for developing a mobile phone. This simulator consists of 3 major modules: Graphic Tool Editor, User Interface Software(UI), and Network Command Processor(NCP). The Graphic Tool Editor can design a virtual mobile terminal. The NCP sends a command to the phone and then receives its status from the phone after completion of the command. We can add or modify lots of features easily to the phone using the UI module. These modules can interact each other by sharing the common area in the memory. By doing so, these modules can exchange their status and data to operate in real-time. We have designed and tested a virtual prototyping phone for the LGP 3200 manufactured by LGIC by using the simulator. Through a series of experiment, we have believed that our virtual prototyping interactive simulator can do shorten its development and testing cycle by applying it in the early design phase.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.2
• /
• pp.93-96
• /
• 2007

LCD (liquid crystal display) industry is needed to goods of high reliability and is interested in products without harmful material. In this experiment, we made the LED backlight unit for Automotive-navigation. And for making this backlight unit we used to eight side emitting type white LEDs with 1 W high power of the lumileds company. We could know that this backlight unit releases to 6500 nit in 14 W power consumption and start up voltage time is under the 15ms in the ambient temperature $-20\;^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.693-696
• /
• 2009

The ray-tracing technique was used to optimize the light guide plate for the purpose of improving the on-axis luminance on the edge-lit backlights. One-dimensional prisms and engraved V-shaped patterns were applied to the upper and the lower surfaces of the light guide plate, respectively. By optimizing the apex angles of these micro-structures, as well as the shape of the reverseprism film put over the light guide plate, highly-collimated light-output distribution could be obtained on the backlight, which may contribute to the development of mobile LCD's with low power consumption.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10a
• /
• pp.514-516
• /
• 2003

LCD(Liquid Crystal Display)는 자체 발광능력이 없으므로 그 후면에서 LCD 화면을 밝혀주는 BLU(Backlight Unit)를 필요로 한다. BLU의 핵심부품으로써 광원으로부터 나온 빛을 LCD의 패널 방향으로 이끌어내는 역할을 담당하고 있는 부분이 바로 도광판이고, 빛을 패널 방향으로 고르게 분포시키기 위해 도광판 하부에 점 모양의 확산물질을 인쇄한다. 이 인쇄패턴은 광원으로부터의 거리에 따라서 그 크기를 다르게 함으로써 패널 부분으로 균일한 평면광을 생성하도록 한다. 따라서 보다 균일한 평면광을 생성하는 BLU를 개발하기 위해서는 주어진 조건에서 패널 부분으로 균일한 평면광을 생성하도록 설계된 인쇄패턴을 찾는 것이 관건이다. 이러한 인쇄패턴을 Simplex Search 알고리즘을 사용하여 자동으로 찾게 함으로써 수작업으로 찾는 것보다 빠른 시간 내에 더욱 효율적인 인쇄패턴을 찾도록 한다.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.248-249
• /
• 2007

나노미터 크기의 회절격자 패턴이 형성된 도광판을 설계하기 위한 전산모사를 수행한다. 광원은 LED 4개를 사용하였으며 PMMA 도광판 재질의 파장에 따른 빛의 흡수 현상을 고려하였다. 도광판 위치에 따른 투과광선의 세기 분포, 투과광선의 투과각도 분포 및 편광에 따라 투과광선의 세기가 어떻게 달라지는지 살펴보았다.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.142-143
• /
• 2007

나노미터 크기의 동심원 패턴이 형성된 도광판을 설계하기 위한 전산모사를 수행한다. 광원은 LED 1개를 사용하였으며 PMMA 도광판 재질의 파장에 따른 빛의 흡수 현상을 고려하였다. 도광판 위치에 따른 투과광선의 세기 분포, 투과광선의 투과각도 분포 및 편광에 따라 투과광선의 세기가 어떻게 달라지는지 살펴보았다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.21-25
• /
• 2008

A CCFL which commonly used in the back light units for the LCD, possess very high brightness hence, was widely used as a line light source. However, the use of CCFL, caused for several environmental concerns since it contain highly toxic mercury, gradually replaced into a LED. But the LED is a spot light source, the dark area occurs in the surface of the back light units. In this paper, we proposed the lens that can convert the spot light into the line light and it can remove the dark area in the surface of the back light units. The lens is composed with the light condensation part and the light guiding part. The conditions obtained will be helpful to plan an optimum structure for such preparation.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.6
• /
• pp.32-38
• /
• 2010

Laser material processing technology is adopted in several industry as alternative process which could overcome weakness and problems of present adopted process, especially semiconductor and display industry. In semiconductor industry, laser photo lithography is doing at front-end level, and cutting, drilling, and marking technology for both wafer and EMC mold package is adopted. Laser cleaning and de-flashing are new rising technology. There are 3 kinds of main display industry which use laser technology - TFT LCD, AMOLED, Touch screen. Laser glass cutting, laser marking, laser direct patterning, laser annealing, laser repairing, laser frit sealing are major application in display industry.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.09a
• /
• pp.17-22
• /
• 2005

The residual birefringence in molded plastic parts can be divided into two kinds of residual birefringence, i.e., the flow induced residual birefringence produced in flowing stages and the thermally induced residual birefringence produced in cooling stage. In this paper, the effect of new injection-press molding process with normal injection mold, i.e. I) injection-compression mode, ii) injection-press mode, on the distribution of birefringence was studied. It was found that the values of the birefringence was reduced at i) low clamping force and ii) longer mold opening length by injection-press molding.