• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.1
• /
• pp.75-84
• /
• 2021

In this study, the correlation between cement quality(chemical composition, mineral composition, and compressive strength) and amount of waste alternative fuels used in the cement manufacturing process and was investigated. Cement manufacturing facility using coal, soft plastics(plastics that are easily scattered by wind power, such as vinyls), hard plastics(plastics that do not contain foreign substances, waste rubber, PP, etc.) and reclaimed oil was analised. Data was collected for 3 years from 2017 to 2019 and let the amount of fuels used as an independent variable and cement quality data as a dependent variable. As a result, depending on the type and quality of the alternative fuel has not a significant effect on the chemical composition(Cl and LSF) and mineral composition(f-CaO, C3S contents). Contrary to the concern that the compressive strength of cement would decrease, there was a significant positive correlation between amount of alternative fuel used and cement compressive strength.

• The KIPS Transactions:PartA
• /
• v.12A no.5 s.95
• /
• pp.413-420
• /
• 2005

The Newton-Raphson iterative algorithm for finding a floating point reciprocal square mot calculates it by performing a fixed number of multiplications. In this paper, a variable latency Newton-Raphson's reciprocal square root algorithm is proposed that performs multiplications a variable number of times until the error becomes smaller than a given value. To find the rediprocal square root of a floating point number F, the algorithm repeats the following operations: '$X_{i+1}=\frac{{X_i}(3-e_r-{FX_i}^2)}{2}$, $i\in{0,1,2,{\ldots}n-1}$' with the initial value is '$X_0=\frac{1}{\sqrt{F}}{\pm}e_0$'. The bits to the right of p fractional bits in intermediate multiplication results are truncated and this truncation error is less than '$e_r=2^{-p}$'. The value of p is 28 for the single precision floating point, and 58 for the double precision floating point. Let '$X_i=\frac{1}{\sqrt{F}}{\pm}e_i$, there is '$X_{i+1}=\frac{1}{\sqrt{F}}-e_{i+1}$, where '$e_{i+1}{<}\frac{3{\sqrt{F}}{{e_i}^2}}{2}{\mp}\frac{{Fe_i}^3}{2}+2e_r$'. If '$|\frac{\sqrt{3-e_r-{FX_i}^2}}{2}-1|<2^{\frac{\sqrt{-p}{2}}}$' is true, '$e_{i+1}<8e_r$' is less than the smallest number which is representable by floating point number. So, $X_{i+1}$ is approximate to '$\frac{1}{\sqrt{F}}$. Since the number of multiplications performed by the proposed algorithm is dependent on the input values, the average number of multiplications Per an operation is derived from many reciprocal square root tables ($X_0=\frac{1}{\sqrt{F}}{\pm}e_0$) with varying sizes. The superiority of this algorithm is proved by comparing this average number with the fixed number of multiplications of the conventional algorithm. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a reciprocal square root unit. Also, it can be used to construct optimized approximate reciprocal square root tables. The results of this paper can be applied to many areas that utilize floating point numbers, such as digital signal processing, computer graphics, multimedia, scientific computing, etc.

• The KIPS Transactions:PartA
• /
• v.12A no.2 s.92
• /
• pp.95-102
• /
• 2005

The Newton-Raphson iterative algorithm for finding a floating point reciprocal which is widely used for a floating point division, calculates the reciprocal by performing a fixed number of multiplications. In this paper, a variable latency Newton-Raphson's reciprocal algorithm is proposed that performs multiplications a variable number of times until the error becomes smaller than a given value. To find the reciprocal of a floating point number F, the algorithm repeats the following operations: '$'X_{i+1}=X=X_i*(2-e_r-F*X_i),\;i\in\{0,\;1,\;2,...n-1\}'$ with the initial value $'X_0=\frac{1}{F}{\pm}e_0'$. The bits to the right of p fractional bits in intermediate multiplication results are truncated, and this truncation error is less than $'e_r=2^{-p}'$. The value of p is 27 for the single precision floating point, and 57 for the double precision floating point. Let $'X_i=\frac{1}{F}+e_i{'}$, these is $'X_{i+1}=\frac{1}{F}-e_{i+1},\;where\;{'}e_{i+1}, is less than the smallest number which is representable by floating point number. So, $X_{i+1}$ is approximate to $'\frac{1}{F}{'}$. Since the number of multiplications performed by the proposed algorithm is dependent on the input values, the average number of multiplications per an operation is derived from many reciprocal tables $(X_0=\frac{1}{F}{\pm}e_0)$ with varying sizes. The superiority of this algorithm is proved by comparing this average number with the fixed number of multiplications of the conventional algorithm. Since the proposed algorithm only performs the multiplications until the error gets smaller than a given value, it can be used to improve the performance of a reciprocal unit. Also, it can be used to construct optimized approximate reciprocal tables. The results of this paper can be applied to many areas that utilize floating point numbers, such as digital signal processing, computer graphics, multimedia scientific computing, etc.

• Archives of Craniofacial Surgery
• /
• v.11 no.1
• /
• pp.28-32
• /
• 2010

Purpose: In accordance with the increasing number of accidents caused by various reasons and recently developed fine diagnostic skills, the incidence of orbital blow-out fracture cases is increasing. As it causes complications, such as diplopia and enophthalmos, surgical reduction is commonly required. This article reports a retrospective series of 5 blow-out fracture cases that had unusual nerve injuries after reduction operations. We represents the clinical experiences about treatment process and follow-up. Methods: From January 2000 to August 2009, we treated total 705 blow-out fracture patients. Among them, there were 5 patients (0.71%) who suffered from postoperative neurologic complications. In all patients, the surgery was performed with open reduction with insertion of $Medpor^{(R)}$. Clinical symptoms and signs were a little different from each other. Results: In case 1, the diagnosis was oculomotor nerve palsy. The diagnosis of the case 2 was superior orbital fissure syndrome, case 3 was abducens nerve palsy, and case 4 was idiopathic supraorbital nerve injury. The last case 5 was diagnosed as optic neuropathy. Most of the causes were extended fracture, especially accompanied with medial and inferomedial orbital blow-out fracture. Extensive dissection and eyeball swelling, and over-retraction by assistants were also one of the causes. Immediately, we performed reexploration procedure to remove hematomas, decompress and check the incarceration. After that, we checked VEP (visual evoked potential), visual field test, electromyogram. With ophthalmologic test and followup CT, we can rule out the orbital apex syndrome. We gave $Salon^{(R)}$ (methylprednisolone, Hanlim pharmaceuticals) 500 mg twice a day for 3 days and let them bed rest. After that, we were tapering the high dose steroid with $Methylon^{(R)}$ (methylprednisolon 4 mg, Kunwha pharmaceuticals) 20 mg three times a day. Usually, it takes 1.2 months to recover from the nerve injury. Conclusion: According to the extent of nerve injury after the surgery of orbital blow-out fracture, the clinical symptoms were different. The most important point is to decide quickly whether the optic nerve injury occurred or not. Therefore, it is necess is to diagnose the nerve injury immediately, perform reexploration for decompression and use corticosteroid adequately. In other words, the early diagnosis and treatment is most important.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.7
• /
• pp.920-929
• /
• 2017

Objective: The bursa of Fabricius (BF) is a central humoral immune organ belonging specifically to avians. Recent studies had suggested that miRNAs were active regulators involved in the immune processes. This study was to investigate the possible differences of the BF at miRNA level between two genetically disparate duck breeds. Methods: Using Illumina next-generation sequencing, the miRNAs libraries of ducks were established. Results: The results showed that there were 66 differentially expressed miRNAs and 28 novel miRNAs in bursa. A set of abundant miRNAs (i.e., let-7, miR-146a-5p, miR-21-5p, miR-17~92) which are involved in immunity and disease were detected and the predicted target genes of the novel miRNAs were associated with duck high anti-adversity ability. By gene ontology analysis and enriching KEGG pathway, the targets of differential expressed miRNAs were mainly involved in immunity and disease, supporting that there were differences in the BF immune functions between the two duck breeds. In addition, the metabolic pathway had the maximum enriched target genes and some enriched pathways that were related to cell cycle, protein synthesis, cell proliferation and apoptosis. It indicted that the difference of metabolism may be one of the reasons leading the immune difference between the BF of two duck breeds. Conclusion: This data lists the main differences in the BF at miRNAs level between two genetically disparate duck breeds and lays a foundation to carry out molecular assisted breeding of poultry in the future.

• Journal of the Korea Furniture Society
• /
• v.20 no.4
• /
• pp.307-316
• /
• 2009

Seoul, the capital of Korea, is worldwide city; Seoul is 600 year-old city as a capital and more than 10 millions of population live in Seoul, Image of Seoul has began to be known to the peoples in the world through 1988 Seoul Olympic Games and 2002 World Cup. However, in the public design and trees lining street system, Seoul hasn't been escaped from the image of a city which lacks of the characterization in the culture and identity aspects. This paper applied a protective fence designing simulation for Cultural Street in Seoul to develop much more the identity of Seoul and characterization of local culture. Also, It's examined and analyzed R&D data, and applied traditional patterns to design to set developmental capacity of design and a direction of fence design in the past, present and future. It's analyzed the present condition of domestic manufacturers and examples for installation, selected randomly 7 places of domestic cultural places as an alternative to compare the previous design to the present design with 3D design and photos composing method, and developed the related situation. Also, It's visualized this method to let the citizens and all levels of society determine the design. besides that, developed the traditional patterns to apply the patterns to the design, considering the characteristic of each region and characteristic of each road. It's suggested this fence design to apply the image of advanced Korea and Seoul as a creative cultural city, and the international status of Korea and Seoul to the trees on the historical and traditional street. Also, put an importance to bring the identity of Seoul and Korea in the world into relief.

• Journal of Korean Library and Information Science Society
• /
• v.21
• /
• pp.253-289
• /
• 1994

The purpose of this study is about the search pattern of LINNET (Library Information Network System) OPAC users by transaction log, maintained by POSTECH(Pohang University of Science and Technology) Central Library, to provide feedback information of OPAC system design. The results of this study are as follows. First, for the period of this analysis, there were totally 11, 218 log-ins, 40, 627 transaction logs and 3.62 retrievals per a log-in. Title keyword was the most frequently used, but accession number, bibliographic control number or call number was very infrequently used. Second, 47.02% of OPAC, searches resulted in zero retrievals. Bibliographic control number was the least successful search. User displayed 2.01% full information and 64.27% local information per full information. Third, special or advanced retrieval features are very infrequently used. Only 22.67% of the searches used right truncation and 0.71% used the qualifier. Only 1 boolean operator was used in every 22 retrievals. The most frequently used operator is 'and (&)' with title keywords. But 'bibliographical control number (N) and accessionnumber (R) are not used at all with any operators. The causes of search failure are as follows. 1. The item was not used in the database. (15, 764 times : 79.42%). 2. The wrong search key was used. (3, 761 times : 18.95%) 3. The senseless string (garbage) was entered. (324 times : 1.63%) On the basis of these results, some recommendations are suggested to improve the search success rate as follows. First, a n.0, ppropriate user education and online help function let users retrieve LINNET OPAC more efficiently. Second, several corrections of retrieval software will decrease the search failure rate. Third, system offers right truncation by default to every search term. This methods will increase success rate but should considered carefully. By a n.0, pplying this method, the number of hit can be overnumbered, and system overhead can be occurred. Fourth, system offers special boolean operator by default to every keyword retrieval when user enters more than two words at a time. Fifth, system assists searchers to overcome the wrong typing of selecting key by automatic korean/english mode change.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.5
• /
• pp.45-50
• /
• 1998

This paper presents the process generating the 3-dimensional free f o r m hull form by using an ASMOD(Adaptive Spline Modeling of Observation Data) and a hybrid curve approximation. For example, we apply an ASMOD to the generation of a SAC(Sectiona1 Area Curve) in an initial hull form design. That is, we define SACS of real ships as B-spline curves by a hybrid curve approximation (which is the combination method of a B-spline fitting method and a genetic algorithm) and accumulate a database of control points. Then we let ASMOD learn from the correlation of principal dimensions with control points and make the ASMOD model for SAC generation. Identically, we apply an ASMOD to the generation of other hull form characteristic curves - design waterline curve, bottom tangent line, center profile line. Conclus~onally we can generate a design hull form from these hull form characteristic curves.

• Journal of Families and Better Life
• /
• v.4 no.2
• /
• pp.103-117
• /
• 1986

The purpose of this study is to provide the basic information for the improvement of housewives consciousness and satisfaction of household work by analyzing the data regarding the housewives consciousness and satisfaction toward household work. The research problems was described as follows; 1) How independent variables influence the housewives consciousness of household work. 2) How independent variables influence the satisfaction of household work. 3) How relate the housewives consciousness and the satisfaction of household work. The research was conducted on 354 housewives in Seoul during the end of January and the beginning of March, 1986. As for the measurement of the instrument, questionnaire with 46 items was made by investigator. The data were analyzed by frequency, percentage, mean and t-test, F-test, Scheffe-test, Pearson-r. The results were summarized as follows; 1) Among the independent variables, the ages of housewives, durations of marriage, psychologica satisfaction were variables to have influence on the housewives consciousness towark household work. 2) Among the independent variable,s the socio-economic status, durations of marriage, psychological satisfaction were variables to have influence on the satisfaction of household work. 3) There were strong positive correlationship between the housewives consciousness and the satisfaction of household work. As a result, it is necessary to minimize the repetition and the overload of house-hold chores through the rationalization of household work and also to divide householdwork properly to family members. We let the housewives feel that her ability can be obtained from the household work. Especially the housewives must have a clear and a high level of consciousness of the household work an expect to receive high value of her household work from the family members. In order to do so, it seems to be important that housewives makes on great effort to have a positive value system and attitudes toward the consciousness and satisfaction of household work. We also must develop those factors through school and home education.

• Journal of Korea Game Society
• /
• v.4 no.1
• /
• pp.50-57
• /
• 2004

The copyright against the game which is successful to a performance, is increasing rapidly. The compute r game is sensitive to a popularity. Game from the hazard which it develops short time, the expense which is cheap, about lower the dispute with a copyright, a reproduction and the ticket paragraph increases with the insufficient back of technical power. It analyzes the quality of the tools comparison it will be able to analyze the source codes from the dissertation which it sees. It analyzed the game source code and against the method which produces the original program and the reproduction degree of reproduction program for it researched. The method which produces a reproduction degree game feature following function shares a module especially. After from each module separating a file in file structure, source pro gram and data structure form, it calculates a similarity measure. It followed in important degree of each function and weight it let and the fixed quantity reproduction degree of full game program it produced.