• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.2
• /
• pp.122-129
• /
• 2015

In this study, we propose a low voltage stress and cost-effective light emitting diode (LED) driver capable of multi-channel current balancing. Conventional LED drivers require as many boost converters as the number of LED channels, whereas the proposed LED driver requires only one buck converter and several balancing capacitors instead of several expensive boost converters. Additionally, while the components of the boost converter have high voltage stress and depend on the LED driving voltage, components of the proposed driver have about one-half of the voltage stress across all components. The proposed driver exhibits high reliability and cost effectiveness because it only uses few DC blocking capacitors with no additional active devices to balance the current of multi-channel LEDs. The proposed driver exhibits high reliability and cost effectiveness. The validity of the proposed driver is confirmed through a theoretical analysis. An explanation of the design considerations and experimental results were obtained using a prototype applicable to a 46" LED-TV.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.2
• /
• pp.1-5
• /
• 2023

In the past, display devices have undergone many changes, such as plasma TVs and LCDs, and have continued to develop. Recently, new display technologies, such as Organic Light Emitting Diode displays and Inorganic Light Emitting Diode displays, have been developed. Among them, Micro LED displays have the potential to improve performance more than LCDs and OLEDs, but a lot of effort and time are needed until the mass production technology (transfer and bonding) of Micro LED displays is developed. We have developed a new Micro LED display light source that can be produced using existing transfer and bonding process technologies to enable faster commercialization of Micro LED in the industry. This light source is TFT deposition on LED. TFT deposition on LED has the advantage of being able to produce displays using existing process technology, making early commercialization of display application products possible. In this study, we applied the Active Driving method to verify the performance of TFT deposition on LED as a display to determine its commercialization potential. Additionally, to facilitate faster application of Micro LED in the industry, we applied TFT deposition on LED to Optical Wireless Communication systems, which are widely used in application service areas such as safety/security and sensors, to verify its communication performance. The experimental results confirmed that TFT deposition on LED is not only capable of AM driving but can also be applied to OWC systems.

• The Journal of the Korea Contents Association
• /
• v.15 no.11
• /
• pp.58-73
• /
• 2015

For the purpose of achieving ad novelty, certain types of ads are frequently created to gain consumers' attention leaving out some of the main creative elements which have generally been considered to be important in producing ad effectiveness. Given circumstance, this experimental study examines the effects of different sets of creative elements in TV advertising; specifically, the research manipulated a TV commercial containing different types of creative elements and explored the effects on attitude towards the ad and the brand. The results are summarized as follow: Fist, there is significant difference in both ad attitude and brand attitude between two groups. The group of people who watched a TV commercial including both product & non-product related elements showed higher mean attitude towards the ad. Second, the ad with both product & non-product elements led more favorable attitude towards the ad when brand familiarity is high. Finally, the group of male participants showed more favorable attitude towards the ad with both product & non-product related elements when brand familiarity is low. Findings from this study will be able to provide a valuable contribution to the strategic decision-making process as ad agencies look for the basis for consideration of creative strategy in TV advertising.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.61-65
• /
• 2011

Recently, LCD (liquid crystal display) industry is needed to goods of high reliability and wide range temperature condition and it is interested in products for extremely cold condition without failure of light-up. In this experiment, we made the LED backlight unit for Automotive-navigation under the extremely cold condition. And for making this backlight unit, we used to eight side emitting type white LEDs with 3W high power LED. We could know that this backlight unit releases to 18,000 nit in 24W power consumption and start up voltage time is under the 1ms in the ambient temperature at -40.

• The Safety technology
• /
• no.170
• /
• pp.18-19
• /
• 2012

현대를 살아가는 우리들이 누구나 한번쯤 들어봤을 말이 "IT"일 것이다. IT산업은 워낙 범위가 넓다보니 관련 사업체들도 많고 관련 부품, 제품들도 우리의 상상을 초월할 만큼 많다. 그중 하나가 수년전부터 각광을 받기 시작한 LED 산업이다. LED는 우리가 흔히 알고 있는 TV나 컴퓨터 디스플레이 장치에 쓰이는 것 외에도 많은 분야에 활용되고 있다. LED 제품을 생산하는 회사 가운데 '루미마이크로(주)'는 2002년 설립된 이래 꾸준한 발전과 성장으로 현재 400억 이상의 매출 실적을 올리고 있는 알짜 회사로 거듭나 있다. 자본금 5,000만원으로 설립된 회사가 이처럼 튼실한 기업으로 성장할 수 있었던데에는 회사 구성원들의 부단한 노력과 열정이 있었기 때문이겠지만, 그 이면에는 '회사구성원들이 모두 건강하고, 행복하도록 해야겠다'는 진심어린 마음가짐을 가진 안전담당자가 있었기에 가능했다. 이번호에서는 각종 LED를 전문적으로 개발 생산하고 있는 '루미마이크로(주)'의 황준호 과장을 만나봤다.

• Ceramist
• /
• v.21 no.1
• /
• pp.55-63
• /
• 2018

Recently, display technology has been focused in regard with with color reproduction, contrast ratio, image resolution and color bit. Among these technologies, the color reproducibliity of White, Red, Green, and Blue is associated with the TV plaform and is expressed as a major technology. Major TV platforms are divided into three categories since 2015, including LCD-based phosphor coverted LED BLU technology, QD sheet technology using nano-sized quantum dots, and OLED technology. In this paper, we describe the color reproducibility definition and background, luminescent materials with wide color gamut, color reproducibility of TV display performance, and discuss about next luminescent materials.

• Design & Manufacturing
• /
• v.13 no.1
• /
• pp.36-41
• /
• 2019

A large plastic molding requires an injection molding with a large clamping force. However, it could not be prepared in the manufacturing at any time. In order to solve the problem, the injection molding analysis study was conducted on the back cover of 55 inch LED TV. The study compared the case of applying the existing flow system such as hot runner, the improvement of the hot runner lay-out and the precise control of the gate operation time, From the results of using the improved flow system, it was found that the welding and the clamping force were considerably improved as compared with before the improvement. In particular, the clamping force was reduced by 50% compared with before the improvement.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.824-835
• /
• 2018

In this study, the impact on the number of cable TV subscribers as well as the profit of cable TV has been examined, and the impact on enlarging the digital broadcast viewing rights of cable TV subscribers and viewers' welfare has also been examined. We investigated the trends in the number of analog and 8VSB subscribers and revenue of cable TV operators by region and analyzed based on changes in the number of channels provided by each operator. The results show that analog subscribers and digital subscribers are delaying their departure through 8VSB conversion, and VOD subscription fees and home shopping transmission fees have a significant impact on operating profit. Subscribers, as they switched over to 8VSB, have become able to view channels of various genres with clear picture quality for a same subscription fee, and the program providers could offer programs to more customers. The government's deregulation policy due to the changes in broadcasting environment led to the facilitation of digital conversion of Pay-TV and improvement of viewers' welfare.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.12
• /
• pp.16-27
• /
• 2013

This study describes the difference of lighting directing techniques of between asian and westerner in the residential space, and presents the LED lighting environment according to the residents' behaviors. This study was conducted with Koreans, European and North Americans, and the space range was limited to the living room where the various activities occur. The data of the desired LED lighting environment is drawn through lighting technique, illumination color temperature and illuminance variation of LED in living room, and the detailed study results are as follows ; First, the lighting in living space should be made with considering the various behaviors because the expected level according to consideration or not of behavior makes much difference. Second, the comfortably feeling LED lighting environments that are lighting technique, illumination color temperature and illuminance variation, are different between Koreans and North Americans, but Koreans and European feel comfortable under the similar LED lighting environments. Third, the data for the comfortable LED lighting environments is established according to the various residents' behaviors, which are watching TV, reading, studying, relaxing, chatting, entertaining guests. And then, the established LED lighting environments are analyzed with characteristic of behavior and classified according to lighting technique, illumination color temperature and illuminance variation for understanding their characteristic Few studies have been conducted to find out difference of the comfortably feeling LED lighting environment between asians and westerners. Therefore, in this study, it has a great significance to present the difference of the LED lighting environments that asians and westerners feel comfortable in living space, and to draw the characteristic of the expected lighting environment according to residents' behaviors.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.3
• /
• pp.262-272
• /
• 2015

An integrated two-in-one transformer applicable to PSUs for a 120 W LED TV is proposed. This transformer comprises a PFC inductor and an LLC transformer placed and integrated on an E-I-E type magnetic core. Performance is evaluated by observing the coupling coefficients of the proposed two-in-one transformer under various air gap topologies. Among the topologies studied, an integrated transformer with centered air gap shows stable operational characteristics with a minimized mutual coupling (interference). Furthermore, applicability of the proposed integrated transformer to PSUs for a 120 W LED TV is studied from the viewpoint of integrating different magnetic components into one core, resulting to low weight, low cost, and high power density.