• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.15-20
• /
• 2013

In this paper, wireless power transfer system using the magnetic resonance was designed and applied to LED lighting for implementation of wireless lighting. This lighting was made by the converted DC driving type and the direct AC driving type. In the former, transferred AC power was rectified into DC and regulated to the specified voltage value, which leads to produce the loss at the rectifying and regulating circuit. In the latter, wireless-transferred AC power was directly applied to LED, which get rid of the loss derived from the additional circuit. For the efficiency-comparison between the former and the latter, the power at each stage was measured when the same optical output radiated from LED lighting part. The result revealed that the direct AC driving type had 18% higher efficiency than the DC driving type and confirmed that LED lighting using magnetic resonance wireless power transfer system can be efficient by direct AC power supply. And the direct AC driving type had the simple circuit structure and the simple LED lighting formation, so this can leads to various application.

• KIEAE Journal
• /
• v.14 no.6
• /
• pp.81-86
• /
• 2014

In recent years, many researchers have considered the building energy consumption reduction accordingly to deal with abnormal climate changes and greenhouse gas reduction. However, the lighting energy use ratio has increased in spite of the development of the high efficiency lighting device. Therefore, the study aims to produce the LED lighting applications for the effective lighting heat removal by using the heat characteristics of LED lighting and analyzing the heat removal effect. In order to increase radiant heat efficiency, the heat pipe and heat sink was attached on PCB as LED lighting applications. Experiment was conducted to verify the temperature and air velocity of inside duct: thermocouples, anemometer. The heat removal effect of LED lighting applications was measured by observing the temperature of the lighting applications and the change of air velocity in duct. The experiment shows that the temperature change in the duct according to air velocity was $0.9{\sim}5.8^{\circ}C$. It is also concluded that heat removal was calculated from 33 to 81W.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.12
• /
• pp.1-8
• /
• 2012

The performance and lighting characteristics of the LED depend on cooling condition because the power LED generates lots of heat. In this paper, the effect of the generated heat from power LED module on lighting characteristics and performance is measured and evaluated. For experiments, the transient temperature of a power LED module with cooling condition is measured. In addition, the temperature and lighting characteristics of the LED module are measured during the steady state. As a result, the cooling condition is less effective on the lighting characteristics of the LED module at rated current but the cooling condition extremely affects those of the LED module over the rated current. Because high temperature of the power LED module causes the low phosphor conversion, luminance efficiency becomes low and color temperature becomes high. When power LED module are driven over the rated condition, higher temperature is directly related to lighting characteristics and performance of the LED module rather than higher current.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.235-242
• /
• 2014

LED lighting control technique is one of the ongoing research areas for efficient management of LED lighting. In this paper, we design and implementation of LED street lighting remote control system which have a wired and wireless communication function for LED street lighting remote control. The implemented system can automatically dimming and individual(or consolidated) LED street lighting via RS-485/422 or Wi-Fi. In experimental results, the implemented remote control system was satisfactory for all of the desired functions.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.145-152
• /
• 2016

The usage of LED(Light Emitting Diode) has been rapidly increased and energy efficient management of LED light system is regarded as an important technology to enhance the energy efficiency. In this paper, we design and implementation of LED lighting controller which can control the LED lighting by using the wire and wireless communication technology based on the LAN(Local Area Network) and PAN(Personal Area Network). The implemented system can reduce the cost of LED lighting installing and avoids complicated wiring problem. And it is possible to minimize power consumption through automatic or manual LED control that they wished. In experimental results, the implemented LED lighting controller was satisfactory for all of the desired functions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.606-612
• /
• 2012

Visible light communications (VLC) uses modern solid-state LEDs to broadcast information. Emerging white-light LEDs allows the combination of lighting and optical wireless communication in one optical source. In this paper, a new LED lighting using one-chip-type white LED is proposed for efficient illumination and optical wireless communications. Performance analysis such as horizontal illuminance, 3-dB cut-off frequency, inter-symbol interference, signal-to-noise ratio and bit-error rate shows the effects of the shapes of LED lighting. Performance of the proposed LED lighting under the existence of obstacles is superior to that of the existing LED lighting in illumination and optical wireless communication.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1671-1672
• /
• 2006

사인물의 대명사인 네온사인 및 옥외용 광고 조명기기를 대체할 수 있는 LED Lighting Bar를 개발하여 옥외용 광고 시장의 시장성 확보하기 위하여, 광학설계를 통한 고휘도 LED의 선정 및 배치, 케이스 설계를 실시하고 LED모듈에 AC 220V 전원을 직접 인가할 수 있으며 효율이 높고 컴팩트한 구동회로를 설계하였다. 또한 One Chip 마이크로컨트롤러를 사용하여 RGB LED의 광색가변 및 점멸 제어회로를 설계하고, LED 모듈간에 2개의 제어선만을 연결하여 다양하고 다이나믹한 네온사인 동작(점멸, 광색가변)이 일어나도록 소프트웨어를 설계하였다. 그 결과, 설계된 LED Lighting Bar는 전체 크기가 $D150{\times}W50{\times}H50mm$로 매우 컴팩트하고 LED 배치 및 광학설계를 통하여 최대광도 70cd를 실현하였으며, LED Lighting Bar의 동작개수에 관계없고 설치가 간단하며 10개 이상의 사인 패턴 제어가 가능하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1020-1026
• /
• 2012

In this paper, we proposed a RTOS-based lighting control system to improve energy efficiency. This proposed system, real time process was designed to the specified division of the LED streetlight control module for the RTOS-based lighting control into three different tasks. The first task transmits LED lighting signal by measuring illuminance, and the second task transmits motion detecting signal using motion detector. In the third task, lighting control to LED was designed through passed control signal from other tasks The execution status was examined ports that are directly to the ATmega128 MCU for the verification of the system, and illuminance distribution and operating conditions were verified through LED street field test. The proposed RTOS-based lighting control system has brought improving system performance and also facilitate an addition of other functions, and it was possible to optimize energy saving by intelligent lighting pattern control.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.506-511
• /
• 2017

LED lighting, which many companies are pursuing commercialization, is a representative green energy technology. However, the LED lighting for broadcasting image should have high output and easy portability compared with general LED lighting devices for street lamps, advertisement or transportation devices. Therefore, while shooting a broadcast image if you use LEDs as a substitute light source for halogen lamps and fluorescent lamps that are large in size and uncomfortable to handle it is expected that the lightening of the equipment will activate the broadcasting image lighting equipment industry. After considering the mass production of the LED module board and the SMT production size of the chip mounter, the board size was determined considering the overall size of the product by model. In this paper, four 20W LED boards are arranged vertically in order to produce an 80W board. In other words, by sharing LED module board size by model, high power LED lighting equipments of 120W and 200W can be selected as an increase in the number of boards.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.11
• /
• pp.1-13
• /
• 2011

The purpose of this study is the realization of LED light environment closely resembling the Autumn daylight which people feel comfortable with. This research was conducted through an optical experiment and Emotional evaluation through human's eyes. Human beings are affected by the color of light, quality and light intensity. Unlike the past when human beings have worked mainly in daylight, the urbanites today spend most of the time in indoor spaces. Therefore, the artificial light is needed to strive toward a spectrum of daylight. This study is purposed to provide the pleasant light environment for human beings and build its database. This study course is expected to contribute to the new design methodology of the related fields under the development of the LED emotional lighting color.