• Geomechanics and Engineering
• /
• 제32권1호
• /
• pp.35-47
• /
• 2023

Deformability of road pavements in the form of ruts represent a safety risk for road users. In the procedures for dimensioning the pavement structure, the requirement that such deformations do not occur is imperatively included, which results in the appropriate selection of elements (material, geometry) of the pavement structure. Deformability and functionality, will depend of the correct design of pavement structure during exploitation period. Nevertheless, there are many examples where deformations are observed on the pavement structure, in the form of rutting at parts of the road with relatively short length, realised in the same climatic and the same geoenvironmental conditions. The performed analysis of deformability led to the conclusion that the level of deformation is a function of the speed of traffic. This effect is observed on city roads, but also outside of urban areas at roads with speed limits are significant, due to the traffic management, traffic jams (intersections, etc.). Still, the lower speed cause greater deformations. The authors tried to describe the deformability of flexible pavement structures, from the aspects of geotechnical problems, as a function of driving speed. Outcome of the analysis is a traffic load correction coefficient, in terms of using the existing methods of flexible pavement structures design.

• 한국산학기술학회논문지
• /
• 제20권10호
• /
• pp.117-124
• /
• 2019

국군이 운용중인 대부분의 군 전용차량은 개발이 완료된지 15년이 넘었으며, 개발 당시의 기술력과 정비성을 고려하여 수동변속기를 채택하고 있다. 수동변속기는 엔진과 변속기 사이에 동력을 조절/차단하는 클러치를 포함한다. 본 연구의 대상이 되는 2.5톤 군용차량은 수동변속기와 클러치 시스템을 적용하고, 클러치 커버와 릴리스 베어링 간극을 수동으로 조절해야 했다. 이러한 특성으로 인하여 클러치 디스크 조기마모, 클러치 커버 파손 등의 품질문제가 발생하였다. 본 연구는 발생된 품질문제를 해결하기 위하여, 클러치 커버와 릴리스 베어링의 간극을 자동으로 설정하도록 하고 클러치 디스크 자체의 성능도 향상시키는 과정을 거쳤다. 개선된 시스템을 평가하기 위해서, 단시간에 기어변속을 하는 가속내구시험을 수행하였으며 추가적으로 군인이 직접 운전을 하여 차량에 적용하였을 때 이상이 없음을 증명하였다. 본 연구활동을 통해, 클러치 간극을 조정할 필요가 없도록 하여 차량 정비 인력의 정비시간을 단축하였다. 또한, 클러치 간극을 조정해 주지 못함으로써 발생되는 품질문제를 해소하여, 근본적인 개선책을 제시하였다고 볼 수 있다.

• 한국지반공학회논문집
• /
• 제23권3호
• /
• pp.61-75
• /
• 2007

우리나라에서는 암반 및 자갈층과 같은 단단한 층 내에 깊은 기초를 매입하는 것이 일반적이다. 그러나 Chaophraya(Bangkok)와 Mississippi강 삼각주에서 실시되고 있는 것과 같이, 대심도 낙동강 삼각주 퇴적토에서도 말뚝의 지지층으로써 중간 깊이에 위치하는 모래 및 모래질 자갈층을 고려할 필요가 있다. 이 연구는 이 지역에서 PHC 말뚝을 요구하는 깊이까지 항타할 때, 말뚝의 지지력을 위한 적절한 평가법을 찾고자 하였다. 지반조사는 두 현장의 5개소에서 실시되었다. 말뚝의 지지력은 지반조사 결과를 이용하고 CPT에 근거한 평가법과 여러 다른 해석법을 적용하여 계산되었으며, 상호 비교가 이루어 졌다. 항타된 5개의 말뚝에 대해 매입된 전 깊이에 걸쳐 잘 알려진 PDA시험이 체계적으로 수행되었다. 여러 평가법에 의하여 계산된 지지력은 PDA 및 정재하 시험결과와 함께 비교되었다. 그 결과, 주면마찰력은 set-up 효과에 따라 지배적으로 영향을 받으며, 장시간 경과 후에는 $\beta$법에 의한 결과와 좋은 일치를 보였다. 선단 지지력은 과소평가되는 PDA시험 보다는 정재하시험결과에 근거하여 적절한 평가법을 선정하였다. 최종적으로, CPT결과를 이용하여 이 지역에 적합한 지지력의 평가법을 도출하였다.

• 한국전기전자재료학회논문지
• /
• 제28권5호
• /
• pp.344-349
• /
• 2015

A new information society of late has arrived by the rapid development of various information & communications technologies. Accordingly, mobile devices which are light and thin, easy and convenient to carry on the market. Also, the requirements for the larger television sets such as fast response speed, low-cost electric power, wider visual angle display are sufficiently satisfied. The currently most widely studied display material, the Organic Light-emitting Diodes(OLEDs) overwhelms the Liquid Crystal Display(LCD), the main occupier of the market. This new material features a response speed of more than a thousand times faster, no need of backlight, a low driving voltage, and no limit of view angle. And the OLEDs has high luminance efficiency and excellent durability and environment resistance, quite different from the inorganic LED light source. The OLEDs with simple device structure and easy produce can be manufactured in various shapes such as a point light source, a linear light source, a surface light source. This will surely dominate the market for the next generation lighting and display device. The new display utilizes not the glass substrate but the plastic one, resulting in the thin and flexible substrate that can be curved and flattened out as needed. In this paper, OLEDs device was produced by changing thickness of Teflon-AF of hole injection material layer. And as for the electrical properties, the four layer device of ITO/TPD/$Alq_3$/BCP/LiF/Al and the five layer device of ITO/Teflon AF/TPD/$Alq_3$/BCP/Lif/Al were studied experimentally.

• 수산해양기술연구
• /
• 제56권3호
• /
• pp.223-229
• /
• 2020

We analyzed the cutting mechanism of laver harvesting machine in the sea area near Gooam Port in Goheung, Jeollanam-do, and investigated the change and efficiency of laver collecting operation in the working ship. The laver working ship slides uniformly from the bow to the upper part of the laver collecting machine on the deck and cuts the wet laver attached to the bottom of the net at the blade of the havesting machine. The laver farming net, which was loaded with laver turrets on the deck by gravity and collected primitives, consisted of a ship structure that led to the stern side and into the sea. The working ship operation is in harvesting process while driving in a S-shape that is separated by one space to efficiently collect the laver net. During laver working ship operation, the speed was 0.51 m/s in the access stage, 0.56 m/s in the havesting stage, and 0.52 m/s in the exit stage. Considering the cutting edge life and production efficiency of the laver harvesting machine, it is appropriate to harvest 1.15 to 1.26 kg/rpm by operating at a rotational speed of about 700 to 800 rpm rather than forcibly harvesting the product at high speed. On the deck of the working ship, 959.7 kg of starboard and 1048.7 kg of center were 964.7 kg of port side. Based on the starboard, 9.3% of the central part and 0.5% of the port side appeared. The reason for this was due to the difference in harvest time according to the turning direction of the working ship.

• 대한인간공학회지
• /
• 제36권1호
• /
• pp.9-21
• /
• 2017

Objective: The objective of this study is to understand the effect of angle and curvature of push-return switches, which are external factors in the operation environment inside the cars, on the feel of operation and to propose optimum alternatives. Background: Customers' needs for products are changing from functional and performance aspects to customer-led type where customers can reflect on their needs on the products. The operation inside cars is executed by HMI. The push-return switch is utilized as the most intuitive mode of HMI; therefore, this push-return switch, which is widely used, has to be developed by assessing the preference and satisfaction of the customer. Method: The angle and curvatures, which are external factors that affect the feel of operation, are drawn through surveying the preceding research literatures. The stages to construct alternatives in experiments are as follows: (1) the tactile switch is replaced after dismantling the switch assembly to evaluate the internal characteristics proposed by preceding researches, (2) a drawing is prepared by using a design software, is printed using 3D printer, and then it is attached on the switch assembly, and (3) evaluation for satisfaction of operation is carried out by using a driving simulator. Results: Both the angle and curvature that are external factors of switch significantly affect the feel of operation. However, interaction between the two factors is found insignificant. Therefore, an optimum alternative is proposed considering the experimental outcomes. Conclusion: This study evaluates the satisfaction in operation that affects the feel of operation environment inside the cars. Based on the study results, a guideline for switch design in the center fascia is proposed. Application: This study is expected to be used as basic data for designing automotive switches, as well as switches in the industries similar with the operation environments of cars.

• 한국정보전자통신기술학회논문지
• /
• 제4권1호
• /
• pp.23-31
• /
• 2011

본 논문은 차세대 자동차 지능형 통합 스마트 모니터 시스템을 제작하였다. 차량의 계기판 장치는 많은 방해 요소를 감소시키며, 운전자들에게 영향을 주지 않고 도로에 집중할 수 있도록 하는 것이 필수적이다. 위험 경보는 시각적인 디스플레이와 함께 유용하게 사용되지만 기존의 방식은 문제가 있다. 차량 안전 시스템의 최적화는 위험을 알리는 각종 경보보다 더 필수적인 것은 운전자가 도로에 집중할 수 있는 시각적인 장치가 요구된다. 지능형 통합 스마트 모니터 시스템은 자동차에서 가장 많이 보는 정보인 자동차 속도, 엔진 회전속도, 연료, 엔진 온도, 연료 게이지, 회전표시등과 각종 경보 표시등 기본 정보를 모아서 운전자에게 제공한다. 본 논문에서 설계한 지능형 통합 스마트 모니터 시스템은 박막 트랜지스터 액정 표시 장치, 액정 표시 장치배경 조명 발광다이오드, 평면 미러, 특수 제작된 렌즈 및 구동회로로 구성되어 있으며, 운전자 안전성을 고려한 차세대 지능형 자동차 통합스마트 모니터 시스템을 제작, 분석하였다.

• 한국항공우주학회지
• /
• 제42권1호
• /
• pp.37-46
• /
• 2014

본 논문에서는 지상 주행과 비행이 가능한 이중모드 PAV의 무인 축소모델 개념설계 및 개발시험 과정에 관하여 기술하였다. 운용 요구도를 검토한 결과 멀티로터 형상에 나셀틸트 기능을 결합한 쿼드 틸트 프롭형 비행체가 제안되었다. 프로펠러 추진을 위한 모터와 주행을 위한 구동장치를 하나의 나셀에 집적하고, 나셀 틸트 구조에 의해 비행 및 주행모드의 변경이 가능하도록 구현하였다. 개념설계를 통해 주요 설계변수와 초기 제원이 확정되었고, 비행모드 및 주행모드 시험용 플랫폼을 제작하여 기능시험을 수행하였다.

• Wind and Structures
• /
• 제21권2호
• /
• pp.223-239
• /
• 2015

Open decks are a widely used deck configuration in long-span cable-stayed bridges; however, incorporating aerodynamic countermeasures are advisable to achieve better aerodynamic performance than a bluff body deck alone. A sectional model of an open deck cable-stayed bridge with a main span of 400 m was selected to conduct a series of wind tunnel tests. The influences of five practical aerodynamic countermeasures on flutter and vortex-induced vibration (VIV) performance were investigated and are presented in this paper. The results show that an aerodynamic shape selection procedure can be used to evaluate the flutter stability of decks with respect to different terrain types and structural parameters. In addition, the VIV performance of $\prod$-shaped girders for driving comfortableness and safety requirements were evaluated. Among these aerodynamic countermeasures, apron boards and wind fairings can improve the aerodynamic performance to some extent, while horizontal guide plates with 5% of the total deck width show a significant influence on the flutter stability and VIV. A wind fairing with an angle of $55^{\circ}C$ showed the best overall control effect but led to more lock-in regions of VIV. The combination of vertical stabilisers and airflow-depressing boards was found to be superior to other countermeasures and effectively boosted aerodynamic performance; specifically, vertical stabilisers significantly contribute to improving flutter stability and suppressing vertical VIV, while airflow-depressing boards are helpful in reducing torsional VIV.

• 한국간호교육학회지
• /
• 제6권2호
• /
• pp.303-326
• /
• 2000

Only one hundred years of history in nursing education in Korea is not enough to develop the subject fully as a science. However, the development of Korean nursing education is a great historical event, because Korean nursing education has been accepted by a male-oriented Korean society and has led to a new paradigm in the new millenium. These results are largely due to the Korean people's high enthusiasm for education, as well as Korean women's diligence. I think these 100 years of history can be divided into five periods: (1) the Sunlight period (1900-1911) (2) the New born period (1912-1945) (3) the Settle-down period (1946-1960) (4) the Marked Growth period (1961-1980) (5) the Jumping Period (1981-2000) These classifications are characterized by changes in the educational system, a changed nursing curriculum, educational goals, educational outcomes, and implications. The characteristics of historical development of Korean nursing education was evaluated in three dimensions: structures, contents, and outcome. The structure of Korean nursing education consists of a 3-year program and a 4-year program. Most nursing leaders in Korea hope that these two programs will converge into one system. Secondly, the contents of nursing education in Korea underwent very active changes, according to historical development. These changes in the nursing curriculum have been developed to provide a professional education and develop nursing education as a modern science. Lastly, as to the results of nursing education in Korea, the education was needed to turn out advanced specialists in nursing. In the new millenium, knowledge and information will be the driving forces behind social development. A nation's level of development and creativity in nursing education is the most potent determinant of the future of Korean nursing. The best way to prepare for future challenges will be to create the backbone of a nursing education system. Hence, well-educated nurses in graduate programs should be turned into advanced specialists in nursing. These groups will upgrade the image of Korean nurses, and will have strong influence to improve patient care and the health situation in Korea.