• 조명전기설비학회논문지
• /
• 제29권12호
• /
• pp.8-14
• /
• 2015

An effective way to ensure that LEDs produce wanted light output is to use a current driving topology, because the brightness of LEDs is directly related to their current. However, this topology may lead to the lifetime shortening of a illumination system because over-currents may flow through non-damaged LEDs in case some LEDs are damaged. This paper presents an adaptive current control circuits for LEDs, which protect LEDs in a good state by limiting the driving currents according to the number of damaged ones. The proposed control circuits consist of a simple constant-current driver and a micro-controller which monitors the voltage of LED array without any auxiliary current sensors for fault diagnosis. And the driving current is automatically controlled into 6-levels according to the number of failures.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.1291-1296
• /
• 2005

In this paper, we prevent a display quality drop for image of characteristics brightness ununiformity depend on LED use to LED vision. It is about that method also a control system development equipped with brightness compensation function of LED vision which is done easily for LED set up of LED vision. Generally, It is calculate driving current value is attended by each brightness to brightness characteristics mathematical function establish by "Y=aX+b", When is doing brightness value for "Y", driving current value for "X", brightness compensation value by using time for "b", characteristics value for "a" ground with characteristics curve of LED. So much, First It is create brightness data of each pixel take a photograph red, green and blue of LED vision. Second It is get average error about each pixel which get average brightness value of entire. Last, It is handle a complicated for about gradationally regulation to color and brightness of image send to LED vision. Also It raise the whole average brightness value of vision adjust for "b" value to solve brightness drop problem of LED using the long time.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.67-73
• /
• 2011

A method obtaining position data(x, y) of object accurately is proposed by using a pair of ultrasonic sensors composed of one transmitter and two receivers. And the driving system which controls the light of flat LED lamp locally using array of ultrasonic sensors (3 transmitters and 6 receivers) is developed. As a result, measured values of y are relatively reliable due to its small average of absolute errors of 1.03[cm]. The measured values of x have average error of 8.52[cm], and it is a large value. However, the average error is decreased by 0.65[cm] after applying algorithm for error correction. The experiments to control the light of flat LED lamp locally with algorithm for error correction are carried out. From the result, measured values of x with average error of 0.97[cm] are obtained and they are very good approximations of actual values.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.151-154
• /
• 2020

Radiation noise due to EMI noise generated by the driving circuits of LED lighting devices in a medical imaging room was reduced by decreasing the noise source in the driving circuits and changing the number of corrections in EMI filters. Noise attenuation and filter changes enabled driving circuits that reduced the electromagnetic waves. Such circuits were efficiently designed by using capacitors and inverters in a given space. Therefore, the malfunction of radiation devices can be minimized by using EMI-reduction filter circuits, and reliable operation of medical devices can be expected by blocking electromagnetic waves.

• 한국위성정보통신학회논문지
• /
• 제8권4호
• /
• pp.17-20
• /
• 2013

본 연구에서는 싸인 보드의 집중도를 올리기 위한 초음파 스피커 시스템의 음성신호이득, 방사패턴과 같은 상태정보 표시를 위한 LED 구동 회로를 소개한다. 초음파 스피커 시스템은 에너지 손실이 적고 음이 멀리 전달된다. 이러한 특징을 지닌 초음파 스피커는 일상생활에서 다양하게 쓰일 수 있다는 점에서 매우 유용하다. 상기 장점을 살려서 제안된 LED 회로는 초음파 스피커 시스템으로부터 인터페이스를 제공받아 선형적인 LED 밝기로써 상태정보를 표현한다. 설계된 회로는 동부 0.35um CMOS 공정을 사용하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1326-1329
• /
• 2009

In large-area LCD displays, we have developed two new control technologies for high-power LED backlight. The Novel control technology called scanning control and local gray control. In addition, a conceptual display system power management was developed. We have implemented high power-LED module driving system which can achieve power saving and cost down. Finally, we designed LED light-bar module of the side type as a backlight source. It not only achieved light & thin but also reduced the quantity of LEDs.

• 한국산학기술학회논문지
• /
• 제11권8호
• /
• pp.2999-3004
• /
• 2010

LED는 다른 광원에 비해 동작수명이 길고, 친환경적이며, 에너지 효율이 높은 장점을 가지고 있다. 최근 LED 기술의 발전으로 인해 고휘도, 고용량의 LED가 개발됨에 따라, 표시장치에만 적용되던 LED를 조명장치에도 적용하는 기술이 확산되고 있다. 조명장치에 적용되는 파워 LED는 발열문제로 인한 소손을 막기 위해 구동전류를 일정한 전류값 이하로 제어할 필요성이 있다. 본 논문은 파워 LED의 구동전류를 설정된 값 이하로 제어하는 전류제 한 기능을 갖는 파워 LED 태양광 보안등 개발에 관한 연구이다. 태양광 발전에 의해 생산된 전력을 DC12[V] 축전지에 저장한 후, 야간에 승압형 DC-DC 컨버터를 통해 DC24[V]로 승압시켜 파워 LED로 공급한다. 태양광 보안등 제어기, 승압형 DC-DC 컨버터, 72[W]급 파워 LED 램프를 개발하여 동작을 확인하고 관련 데이터를 도출함으로써 제안된 시스템의 타당성을 입증하였다.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.9-17
• /
• 2011

The high-power LED (Light Emitting Diode) which is recently gaining popularity as a digital light source has such advantages as low power consumption, long life, fast switching speed, and high efficiency. Thus, many efforts are being made to use the high-power LEDs for general lighting. This paper proposes LED driving circuit uses a DC/DC converter that can recover energy to compensate for the current variations caused by changes in LED equivalent resistance following a temperature change instead of serial resistance. The maximum input voltage of this DC/DC converter has low voltage variations by temperature change when the rated current is formed. In order to return current to the input side, we need a high boosting at low power. Thus, to improve the low efficiency of power converter, the power converter can be configured in such a way to gather the powers of low-capacity DC/DC converters and return the total power. Experiments showed that the proposed system improved efficiency compared to the conventional LED drive using the existing DC/DC converter.

• 대한전자공학회논문지SP
• /
• 제46권4호
• /
• pp.42-49
• /
• 2009

본 논문에서는 red, green, blue(RGB) 광학 센서를 이용하여 RGB light-emitting diode(LED) back light unit(BLU)의 출력색 자극의 변화를 점검하여 RGB LED BLU가 시간에 따라 일정한 목표 색 자극을 출력할 수 있도록 하는 RGB LED BLU 구동 전류 펄스 duty 값을 도출하는 알고리즘을 제안한다. 우선, 현재 RGB LED BLU가 발하는 색 자극 정보를 획득하기 위해 RGB 광학 센서의 출력으로부터 CIEXYZ 색 자극을 계산할 수 있는 RGB to XYZ 변환 행렬을 도출한다. 다양한 RGB LED BLU 색 자극 샘플에 대한 RGB 광학 센서의 출력 값과 CIEXYZ 색 자극 값의 쌍을 이용하여 다항 회귀 방정식을 만들고 각 항의 계수로 행렬을 구성한다. 다음으로, 현재 RGB LED BLU 상태에서 목표 색 자극 값을 발할 수 있는 duty 값을 구하기 위해 목표 색 자극으로부터 duty 값을 계산할 수 있는 XYZ to Duty 변환 행렬을 도출한다. 현재, 한 단계 이전, 두 단계 이전 시점에서 RGB 광학 센서의 출력으로부터 추정한 CIEXYZ 값과 그때 인가된 duty 값의 쌍을 이용하여 다항 회귀 방정식을 만들고 각 항의 계수로 행렬을 구성한다. 일정 시간 간격으로 RGB LED BLU의 출력 색 자극을 점검할 때마다 XYZ to Duty 변환 행렬은 RGB LED BLU의 현재 상태에 적응적으로 변하게 되어 목표 색 자극을 출력할 수 있는 duty 값을 계산할 수 있게 된다.

• Journal of the Optical Society of Korea
• /
• 제16권4호
• /
• pp.449-456
• /
• 2012

For two well-known modulation methods, stepwise current modulation (SCM) and pulse width modulation (PWM), the effects of driving current modulation conditions on chromaticity were experimentally investigated in a white LED lighting system. For the experimental implementation of both SCM and PWM, a white LED lighting was fabricated using phosphor converted (PC) white light emitting diodes (LEDs) and a driving circuit module was developed. By using them, the variations of illuminance, color coordinates, and spectrum were evaluated under various forward current conditions. Through the analysis in color coordinates, yellow shift in SCM and blue shift in PWM were observed on chromaticity diagrams with increasing average driving current. In addition, in order to analyze color deviation quantitatively, color distance before and after current increase, and the correlated color temperature (CCT) were calculated. As a result, for the white LED lighting in both modulation conditions, the maximum difference in the calculated CCT was obtained close to 1000 K. It means that careful consideration is required to be taken in the design of illumination systems to avoid serious problems such industrial accidents.