• 조명전기설비학회논문지
• /
• 제29권1호
• /
• pp.9-14
• /
• 2015

Due to the declining LED price and environment-friendly energy policies, CO2 emission reduction and energy-saving, the LED lighting industry is accelerating rapidly. In particular, the needs for LED lamp, replacing the existing fluorescent lamp without exchange luminaire or driver circuits, are also rapidly increasing. Therefore, replacement for T8 fluorescent lamp, LED T8 lamp was developed and standardized. However, except LED T8 lamps, other lamps' regulations or standards were not enacted. Also, the stability of fluorescent lamp substitutable LED lamp is low due to the difference in electrical characteristics and mismatch between the existing fluorescent lamp ballast and LED lamp. Therefore, many are struggling while developing fluorescent lamp substitutable LED lamp. In this paper describes the properties of existing fluorescent lamp ballasts and the considerations while developing fluorescent lamp substitutable LED lamp : demonstrating its validity by experiments the developed fluorescent lamp substitutable LED lamp prototype.

• 한국위성정보통신학회논문지
• /
• 제10권1호
• /
• pp.77-82
• /
• 2015

본 논문에서는 LED 형광등에 활용이 가능한 컨버터 관한 연구를 수행하였다. 기존 고효율에너지 기자재로 지정된 형광램프용 고조도 반사갓이 LED 형광램프의 Heat-sink 구조상 활용할 수 없는 구조이기 때문에 LED 형광램프 컨버터의 에너지 효율이 뛰어난 회로 설계 및 보호회로 설계가 필요하다. 따라서 본 논문에서는 직관형 LED램프 컨버터에 회로구동방식을 적용한 LED 형광등 연구를 수행하였다. 또한, LED를 광원으로 한 'LED 램프'와 일반 상용 전원에 접속해 직류 전원을 공급할 수 있는 컨버터에 대하여 설계 및 제작을 하였다.

• 수산해양기술연구
• /
• 제46권4호
• /
• pp.503-508
• /
• 2010

Common LED (Light Emitting Diode) lamp has many advantages to compare with fluorescent lamp, long life and no pollution matter like the mercury. The LED lamp is a good light source especially for shipboard lighting because of its compact structure which prevents explosion and shock. Also, low maintenance cost is expected due to its longer life time in comparison with conventional lamps. The LED lamp, however, need some estimates that change of voltage and frequency, vibration, moisture on board to definite accommodation of the LED lamp to shipboard. The purpose of this study is to compare physical properties of a fluorescent lamp with one of the common LED lamp so as to analyze accommodation of common LED lamp on board. This study was carried out in two stages. First, temperature, humidity of illumination, voltage, electric current, frequency and electric power were measured by using experimental equipments. Second, a comparative analysis of consumption electric power, annual oil charge, annual CO2 emission and lamp life time, etc of the fluorescent lamp and common LED one was made. As a result of the study, the consumption electric power of fluorescent lamp was 50% higher than one of the common LED lamp. As a result of measuring life time, it was found that life time of common LED lamp was more about 3.5 fold than one of the fluorescent lamp. Considering these results, it's thought that common LED lamp is verified that energy saving is possible and using is possible as substitute for fluorescent lamp on board.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 춘계학술대회 논문집
• /
• pp.466-471
• /
• 2009

Generally LED lamp has many advantages to compare with a general lamp, long life and no pollution matter like the mercury. Also it is excellence for color rendering and need to small consumption electric rower. However LED lamp has some disadvantages to compare to general fluorescent lamp and That is small light flux about 50% and narrow light distribution than fluorescent lamp. Therefore, to apply LED lamp in an office building, after analyze a illuminance distribution with an environment analysis and cooling, heating and light energy. The purpose of this study is to analyze light environment. light, cooling and heating energy simulation in Office building.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.2050-2055
• /
• 2009

This paper describes the proceeding experimental results to replace the 32 [W] fluorescent lamp installed in subway train to a LED module. We fabricated 25 [W] LED modules to meet the illuminance 300 [lx] specified in the standard for subway train. After the installation of LED modules, comparative analysis with conventional fluorescent lamps was carried out. From the experimental results, illuminances on the height of 0.85 [m] and 1 [m] above floor were 323 [lx] and 360 [lx], respectively. These illuminances satisfied the requirement 300 [lx]. By the application of 25 [W] LED module as a light source in subway train, energy saving about 22 [%] compared with 32 [W] fluorescent is acquired. Also, low cost of maintenance is expected due to 8 times longer lifetime 50,000 hours of LED than that 6,000 hours of fluorescent lamp.

• 농업과학연구
• /
• 제40권4호
• /
• pp.297-303
• /
• 2013

This study was carried out to examine the effect of Red LED (660 nm) and fluorescent lamp for night break (NB) treatments of each 3 hours (22:30-01:30), 4 hours (22:00-02:00) and 5 hours (21:30-:02:30) per day for 53 days on flower bud initiation and growth in Chrysanthemum cv. 'Baekma' and cv. 'Jinba'. The days to flower budding after short-day treatment in 'Baekma' was longer at fluorescent lamp 4 hr (21.0 days) and 5 hr (20.5 days) NB, and it was shorter at Red LED 3 hr (14.2 days). The days to flowering after short-day treatment in 'Baekma' was longer at fluorescent lamp 4 hr (54.0 days), 5 hr (53.5 days) NB, and Red LED 5 hr (53.3 days), and it was shortest at Red LED 3 hr (50.2 days) NB treatment among all treatments. The days to flower budding after short-day treatment of 'Jinba' was longer at fluorescent lamp 4 hr (20.6 days) and was shorter at Red LED 3 hr (14.1 days) among all treatments. Similarly, the days to flowering after short-day treatment of 'Jinba' was longer at fluorescent lamp 4 hr (55.3 days) and was shortest at Red LED 3 hr (50.2 days) among all treatments. Therefore, inhibition of flower bud initiation was the most effective under fluorescent lamp 4 hr treatment. The length of cut flower of 'Baekma' was increased by fluorescent lamp 4 hr, 5 hr, and Red LED 5 hr, but of 'Jinba' was longer at LED 4 hr and 5 hr treatment. The weight of cut flower of 'Baekma' was heaviest at fluorescent lamp 5 hr treatment and was at Red LED 5hr treatment for 'Jinba' even though there was not statistically significant difference between 'Baekma' and 'Jinba'. Consequently, under fluorescent lamp 4 hr for night break was the most effective on flower bud initiation, flowering inhibition and cut-flower characteristics in 'Baekma' and 'Jinba'.

• 한국콘텐츠학회논문지
• /
• 제21권6호
• /
• pp.44-50
• /
• 2021

본 논문은 최적의 모니터 효율성을 설계하기 위해 CCFL과 LED 모니터의 광효율을 비교 분석한다. LCD 디스플레이 광원으로 많이 사용이 되고 있는 냉음극관 램프(Cold Cathode Fluorescent Lamp, CCFL)은 초기 구동 시 1,200[V]이상의 고전압과 점등 후 400 ~ 800[V]의 일정한 정상전압을 공급한다. 또한 3 ~ 6[mA]의 전류를 안정화 시킬 수 있는 전원회로가 필요하다. 고전압을 인가를 하게 되면 인버터에 무리가 많이 가고 냉음극관 램프에 많은 열이 발생을 하여 BLU(Back Light Unit)에 상당한 손상을 주어 그을리는 현상 발생, 이로 인하여 화면 출력 시 화면이 정상적인 색상을 출력을 못하고 노란색 출력, 화면 어두워짐을 확인할 수 있었다. 이러한 증상을 미연에 방지를 하고자 LCD디스플레이의 광원을 냉음극관 램프(Cold Cathode Fluorescent Lamp, CCFL)를 대신하여 발광다이오드(Light Emitting Diode, LED)을 이용하면 효율을 증대할 수 있다. 결론적으로 CCFL 방식보다 LED방식의 효율이 좋다는 것을 증명한다.

• 조명전기설비학회논문지
• /
• 제24권5호
• /
• pp.77-85
• /
• 2010

본 논문은 LED 램프를 사무소 건물에 효과적으로 사용하기 위하여 새로운 통합적 에너지 시뮬레이션을 수행한 연구 결과이다. 일반적으로 LED 램프는 다른 램프에 비하여 에너지 절감효과가 매우 우수하지만 현재 형광램프보다 낮은 광속과 좁은 광분포 등 아직 사무소 건물에 적용하기는 다각적인 검토가 필요하다. 연구결과 냉난방에너지가 20[%] 증가하고 현재 형광등을 대체하기 위해서는 90[lm/$m^2$] 이상으로 설계해야 한다. 따라서 LED램프를 사무소 건물에 적용하기 위해서 광에너지, 냉난방에 미치는 영향 및 사무실환경에 미치는 광분포를 통합적으로 해석하였으며 앞으로 이 결과는 LED 램프를 통한 효과적인 에너지절약 환경을 구축하는 데 중요한 자료를 제공할 것으로 확신한다.

• 조명전기설비학회논문지
• /
• 제26권8호
• /
• pp.8-17
• /
• 2012

Unlike traditional lightings, LED lighting is one of objects that sends user an emotional segments through brightness control from various color temperature and dimming control. Also, within present interior lighting environment, emotional researches about traditional fluorescent lamp and newly implemented LED lighting environment are in active progress. Despite the fact adjectives describing emotions and scale modeling have been repeatedly used in many cases for a long time, there seems to be a lack of results in reliability, and there is a limitation for applying into actual lighting design. The purpose of this study is to construct an actual sized test-bed, which is used to draw out one's emotional words of behavior patterns from inner emotional experiences about lighting environment in an office space. Also, having fluorescent lamp and LED lighting as the main test subjects, we have tested emotional parts according to the changes of color temperature and adjective vocabularies chosen from user's action, and we have compared and analyzed the drawn out data. Also, having fluorescent lamp and LED lighting as the main test subjects, we have tested emotional parts according to the changes of color temperature and adjective vocabularies chosen from user's action, and we have compared and analyzed the drawn out data.

• 조명전기설비학회논문지
• /
• 제29권3호
• /
• pp.30-38
• /
• 2015

As products using LEDs are developed actively, also there has been large request for LED products that can replace traditional lamps like fluorescent lamps and metal halide lamps. But so far there is no proper standard that manufacturer can use and test it. As a result manufacturer can't develop retrofit LED lamps and sell it even they have technology. In this study, by analyzing control gear for fluorescent lamp that is currently used in market which is magnetic or electronic ballast, I'd like to develop proper test method by investigating compatibility between all-type control gear and LED retrofit products.