• Animal Bioscience
• /
• 제35권12호
• /
• pp.1967-1976
• /
• 2022

Objective: The aim of this study was to characterize the fecal microbiota of broiler chickens reared in the presence of different shades of light-emitting diode (LED) lights, correlating this information with biochemical and molecular evidence that allowed drawing conclusions on the state of health of the animals. Methods: Overall, the metagenomic approach on fecal samples was associated with evaluations on enzymes involved in the cellular response to oxidative stress: glutathione peroxidase (GPX), superoxide dismutase and catalase; while the inflammatory aspect was studied through the dosage of a proinflammatory cytokine, the interleukin 6 (IL-6), and the evaluation of the matrix metalloproteinases 2 (MMP-2) and 9 (MMP-9). Specifically, analysis was performed on distinct groups of chickens respectively raised in the presence of neutral (K = 3,300 to 3,700), cool (K = 5,500 to 6,000), and warm (K = 3,000 to 2,500) LED lightings, and a direct comparison was performed with animals reared with traditional neon lights. Results: The metagenomic analysis highlighted the presence of two most abundant bacterial phyla, the Firmicutes and the Bacteroidetes, with the latter characterized by a greater relative abundance (p<0.05) in the group of animals reared with Neutral LED light. The analysis on the enzymes involved in the antioxidant response showed an effect of the LED light, regardless of the applied shade, of reducing the expression of GPX (p<0.01), although this parameter is not correlated to an effective reduction in the tissue amount of the enzyme. Regarding the inflammatory state, no differences associated with IL-6 and MMP-9 were found; however, is noteworthy the significant reduction of MMP-2 activity in tissue samples obtained from animals subjected to illumination with neutral LED light. Conclusion: This evidence, combined with the metagenomic findings, supports a potential positive effect of neutral LED lighting on animal welfare, although these considerations must be reflected in more targeted biochemical evaluations.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.299-307
• /
• 2002

본 연구에서는 복잡 형상의 세라믹체를 효율적으로 성형할 수 있어 새로운 성형기법으로 부각되고 있는 직응집성형(Direct Coagulation Casing, DCC)공정기술에 관하여 콜로이드 계면화학을 이용하여 연구하였다. 높은 고형분량을 가지는 안정된 질화규소 슬립을 제조하기 위하여 분산제, 소결조제 그리고 응집제 각각이 다양한 공정변수에 미치는 영향에 대하여 평가하였다. 1.0 wt% Tetraethylammonium Hydroxide(TEAH)를 첨가하여 염기영역에서 소결조제를 포함한 안정된 51vol%의 질화규소 슬립을 제조할 수 있었다. 질화규소 슬립은 첨가된 $Al(CH_3COO)_2OH$의 온도증가에 따른 열분해를 이용하여 직응집성 유도하였다. 염기영역에서 $Al^{3+}$ 이온들이 aluminum hydroxide$(Al(OH)_3)$ 석출되면서 슬립내 $OH^-$ 농도를 감소시켜 질화규소 슬립을 직응집시켰다.

• 대한기계학회논문집B
• /
• 제39권1호
• /
• pp.45-51
• /
• 2015

최근 강화되는 연료소비율과 배기 규제에 대응하기 위해 자동차용 엔진에 다양한 신기술들이 적용되고 있다. 직접분사식 희박연소 엔진은 안정적인 성층혼합기 연소를 통해 연료소비율 및 배출가스 개선이 가능하지만 과잉공기 조건에서 상대적으로 높은 수준은 질소산화물의 배출은 해결되어야 할 과제이다. 본 연구에서는 직접분사식 희박연소 LPG 엔진에서 가변 밸브 기구를 이용한 흡기 및 배기밸브 시기의 변경이 엔진의 성능 및 배출가스에 미치는 영향을 파악하고자 하였다. 스로틀링을 하지 않은 부분부하 운전 조건에서 흡기밸브 열림 시기의 진각은 공기과잉률의 증가에 의한 질소산화물 배출 증가에 원인으로 작용하였다. 배기밸브 열림 시기를 진각할 경우 팽창일 감소와 펌핑손실 증가에 의해 연료 소비율이 악화되었다.

• 문화기술의 융합
• /
• 제8권1호
• /
• pp.121-129
• /
• 2022

이 연구는 거꾸로 수업, 직접교수법, 협동학습, 실시간 화상수업을 조합한 수업상황에서 학습에 유용한 교수학습활동을 탐색하였다. 연구대상은 교육방법 및 교육공학 과목 4분반, 교육학 교재연구 및 지도법 1분만을 수강한 99명이었다. 이들은 한 학기동안 하이브리드 수업상황을 경험하고, 활용된 22개의 교수학습활동이 학습에 유용한 정도를 리커트 척도에 답하였다. 그 결과, ① 22개의 교수학습활동은 모두 학습에 유용한 것으로 평가되었다. 그 중에서도 높은 평가를 받은 활동은 카톡방에서의 조별토론 내용을 캡처하여 제출한 것, 과제 사례 제공, 연습, 과제에 대한 피드백, 다른 모둠의 과제 결과 공유, 시험 답안에 대한 피드백 등이었다. ② 낮은 평가를 받은 교수학습활동은 화상 문답과 오픈 북 시험이었다. ③ 하이브리드 수업의 학습 효과에 대해서는 3.67점의 긍정적인 평가를 하였고, 학습량도 대면수업만큼 많았던 것으로 인식하였다(평균 3.67, SD=1.03). 자유응답도 문항조사결과를 지지하였다. 이 연구는 대학에서 원격수업을 통해 거꾸로 수업을 시행할 때 성패를 가를 수 있는 관건이 직접교수법, 협동학습의 정확한 실행임을 확인하고, 이를 구현할 구체적이고 효과적인 수업전략들을 검증하였다는 점에서 의미가 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.207-207
• /
• 2010

Both ZnO and GaN have excellent physical properties in optoelectronic devices such as blue light emitting diode (LED), blue laser diode (LD), and ultra-violet (UV) detector. The ZnO/GaN heterostructure, which has a potential to achieve the cost efficient LED technology, has been fabricated by using radio frequency (RF) sputtering, pyrolysis, metal organic chemical vapor deposition (MOCVD), direct current (DC) arc plasmatron, and pulsed laser deposition (PLD) methods. Among them, the PLD system has a benefit to control the composition ratio of the grown film from the mixture target. A 500-nm-thick ZnO film was grown by PLD technique on c-plane GaN/sapphire substrates. The post annealing process was executed at some varied temperature between from $300^{\circ}C$ to $900^{\circ}C$. The morphology and crystal structural properties obtained by using atomic force microscope (AFM) and x-ray diffraction (XRD) showed that the crystal quality of ZnO thin films can be improved as increasing the annealing temperature. We will discuss the post-treatment effect on film quality (uniformity and reliability) of ZnO/GaN heterostructures.

• 한국의류학회지
• /
• 제27권9_10호
• /
• pp.1036-1047
• /
• 2003

This study was carried out in the purpose of proposing internet marketing strategy which can make conversion rate higher through analysis of internet shopping behavior types. This study was executed in two stages; qualitative study, quantitative study. In the qualitative study, internet shopping behavior types were investigated through the In-depth interview and direct observation, and then in the quantitative study, differences of internet shopping behavior types according to consumer characteristics, product properties and shopping-mall types were examined. For qualitative study, 30 samples by focus sampling were inquired and for quantitative study, 334 data were collected through web survey. The results of this study are as follows: First, 7 Internet shopping behavior types of apparel were found through the qualitative study: cautious purchase by price comparison, searching purchase, special low price purchase, impulse purchase, prepurchase deliberation, information accumulation, recreation-oriented. Second, in relation to consumer characteristics, consumers that have many internet purchase experiences showed goal-directed behavior more and female did more special low price purchase behavior and impulse purchase behavior than male. Third, according to product properties, high price product led more cautious purchase by price comparison & prepurchase deliberation behavior and fashionable product led more information-searching behavior. In the case of low price and fashionable products, impulse purchase behaviors were showed more. Forth, according to Internet shopping mall types, category killer shopping mall visitors showed information search behavior, recreation-oriented behavior more.

• 한국통신학회논문지
• /
• 제36권12B호
• /
• pp.1595-1600
• /
• 2011

IM/DD 방식을 이용한 가시광 무선 통신의 성능 저하를 발생시키는 인공광과 태양광에 의한 잡음 레벨을 분석하였다. 통신 성능을 확인하기 위해 LED에 QPSK로 변조된 50ksymbol/sec의 신호를 2MHz의 부반송파에 전송하였으며 PD를 통해 수신된 신호의 EVM과 스펙트럼을 분석하였다. 또한 차광막을 이용하여 신호의 성능을 향상시켰으며 이를 통해 IM/DD방식으로 실외 가시광 통신이 가능함을 확인하였다.

• 패션비즈니스
• /
• 제11권4호
• /
• pp.135-151
• /
• 2007

This study is human body measurement of 200 adult males in their 20s by both direct and indirect methods in order to reveal the representative male upper body types. Composition factors of body types were classified while the combination of direct-indirect measurement values was chosen. The following are the findings: 1) The analysis of direct-indirect measurement statistics showed the following results: 173.80cm (height), 69.87kg (weight), 95.58cm (chest girth), $24.67^{\circ}$ (right shoulder angle), and $9.34^{\circ}$ (shoulder width angle). 2) The factor analysis of the body types by direct measurement produced 5 factors: 1 (front length of upper body), 2 (front length of upper body), 3 (back length of upper body), 4 (circumference of upper body), and 5 (shoulders length). These factors accounted for 90.08%. Also, the cluster analysis of factor scores led to 3 types: 1 (33%, short, comparatively wide shoulders and full in the hips), 2 (25.1%, well-developed upper body in tall, inversed triangle), 3 (41%, average height, short upper body). 3) The body-type factor analysis by indirect measurement resulted in 6 factors with the explanation of 83.24%: 1 (rear upper bady thickness), 2 (front upper body width), 3 (front chest thickness), 4 (left-right shoulder angle), 5 (front width of protrusion distance in chest and shoulders), and 6 (neck's front-rear side angle).In addition, the cluster analysis of factor scores brought about 4 types: 1 (15%, well-developed front chest, beardless waist), 2 (23.5%, flat chest, with shoulder, drooping shoulders, strait neck), 3 (39%, with shoulder, curved back), and 4 (22.5%, narrow and thin, curved waist). 4) Among the 118 subjects (75%), 58 subjects commonly appearing in indirect measurement values group and direct measurement values group were chosen the representative body type group according to asterisk indexes. They had the highest frequency in direct type 3 and indirect type 3, whose combination represented the physical characteristics of the representative body types.

• Structural Engineering and Mechanics
• /
• 제86권5호
• /
• pp.607-619
• /
• 2023

This study, it was tried to evaluate the asphalt behavior under tensile loading conditions through indirect Brazilian and direct tensile tests, experimentally and numerically. This paper is important from two points of view. The first one, a new test method was developed for the determination of the direct tensile strength of asphalt and its difference was obtained from the indirect test method. The second one, the effects of particle size and loading rate have been cleared on the tensile fracture mechanism. The experimental direct tensile strength of the asphalt specimens was measured in the laboratory using the compression-to-tensile load converting (CTLC) device. Some special types of asphalt specimens were prepared in the form of slabs with a central hole. The CTLC device is then equipped with this specimen and placed in the universal testing machine. Then, the direct tensile strength of asphalt specimens with different sizes of ingredients can be measured at different loading rates in the laboratory. The particle flow code (PFC) was used to numerically simulate the direct tensile strength test of asphalt samples. This numerical modeling technique is based on the versatile discrete element method (DEM). Three different particle diameters were chosen and were tested under three different loading rates. The results show that when the loading rate was 0.016 mm/sec, two tensile cracks were initiated from the left and right of the hole and propagated perpendicular to the loading axis till coalescence to the model boundary. When the loading rate was 0.032 mm/sec, two tensile cracks were initiated from the left and right of the hole and propagated perpendicular to the loading axis. The branching occurs in these cracks. This shows that the crack propagation is under quasi-static conditions. When the loading rate was 0.064 mm/sec, mixed tensile and shear cracks were initiated below the loading walls and branching occurred in these cracks. This shows that the crack propagation is under dynamic conditions. The loading rate increases and the tensile strength increases. Because all defects mobilized under a low loading rate and this led to decreasing the tensile strength. The experimental results for the direct tensile strengths of asphalt specimens of different ingredients were in good accordance with their corresponding results approximated by DEM software.

• 분석과 대안
• /
• 제1권1호
• /
• pp.44-64
• /
• 2017

Russia's push in the Asia-Pacific region stems from its interests that have the national, regional and global dimensions. In their turn, the aims of this policy are civilizational, geopolitical, economic and prospective, with a long-term outlook. In the course of their achievement, cooperation with Northeast Asia's countries will play one of the key roles owing to the factors of geographic proximity, Northeast Asia's economic potential, risk hedging and a growing influence Northeast Asia exerts upon the global development. A new cooperation paradigm between Russia and the states of Northeast Asia should be based upon establishing and cementing self-reproducing ties. This is the central aim of Russian initiatives in relations, with Japan, the Republic of Korea, Democratic People's Republic of Korea, Mongolia and China. However, numerous obstacles ranging from Russia's absence in the regional free trade agreements and supply-production chains of value-added production to the permanent international instability generated by Pyongyang's missile-nuclear developments hamper the practical implementation of this task. Realizing the necessity to give an additional impetus to this new cooperative paradigm, Russia has to develop directions with an apparent consolidating effect. The most promising may be the establishment of a permanent security forum based upon Northeast Asia Peace and Security Mechanism chaired by the Russian Federation. The urgency of this measure and its expected support stem from the necessity to strengthen security in Northeast Asia, a task neither the US-led hub-and-spoke system nor ASE-AN-led multilateral dialogue venues have been able to resolve. The issues addressed at the security forum must include the unification of approaches to North Korean nuclear issue and producing a document specifying actions of the claimants on the disputed maritime territories in the "direct contact" situations. At the expert level, Russia has elaborated on the idea to establish such a forum outlining the spectrum of the key directions of cooperation. With the urgency in the establishment of this dialogue venue, its agenda has to be coordinated with the agendas of the existing security systems presented by the US alliances and the ASE-AN-led multilateral negotiations. The practical implementation of this initiative will strengthen security in Northeast Asia as its challenges will be resolved in the pre-emptive way based on coordinated approaches. Therefore, Russia as the Eurasian state will be one of the role players in the advent of the Asian century.