• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4A
• /
• pp.573-578
• /
• 2000

This paper presents a noble optical access system using shared laser and LED light sources, which is based on WDM-PON technologies. This system adopts an external modulation of the shared laser sources for high-speed downstream and a direct modulation of the LED sources for low-speed upstream. To split or combine the transmission channels, AWG(Arrayed Wave-guide Grating) devices are used in the optical cable section. The proposed system is attractive for low cost implementation. The laser light sources can share the optical carriers in the downstream scheme. Also, in upstream, the LED sources can afford to make simple of the circuits for controlling light source and of standardization for ONU(Optical Network Unit). The feasibility of the proposed system is demonstrated by several experiments. Our results show that the system operates well at 2.SGbps for downstream and up to 622.08Mbps for upstream.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.1
• /
• pp.89-93
• /
• 2017

Infratentorial cerebral hemorrhage due to a direct carotid-cavernous fistula (CCF) is very rare. To our knowledge, only four such cases have been reported. Cerebellar hemorrhage due to a direct CCF has not been reported. We describe a 63-year-old female who presented with reduced consciousness 3 days after undergoing a maxillectomy for maxillary cancer. Computed tomography showed a cerebellar hemorrhage. Magnetic resonance angiography showed a left-sided direct CCF draining into the left petrosal and cerebellar veins through the left superior petrosal sinus (SPS). Her previous surgery had sacrificed the pterygoid plexus and facial vein. Increased blood flow and reduced drainage could have led to increased venous pressure in infratentorial veins, including the petrosal and cerebellar veins. The cavernous sinus has several drainage routes, but the SPS is one of the most important routes for infratentorial venous drainage. Stenosis or absence of the posterior segment of the SPS can also result in increased pressure in the cerebellar and pontine veins. We emphasize that a direct CCF with cortical venous reflux should be precisely evaluated to determine the hemodynamic status and venous drainage from the cavernous sinus.

• Korean Journal of Childcare and Education
• /
• v.13 no.1
• /
• pp.107-124
• /
• 2017

Objectives: The purpose of this study was to investigate the effects of children's pride and shame on their interactive peer play, mediated by their daily stress. Methods: The participants of this study were 172 five-year-old children (80 boys and 92 girls) attending kindergartens or child-care centers in Chungbuk, Korea. The data were analyzed by descriptive and correlational analyses, and structural equation modeling using SPSS 19.0 and AMOS 21.0. Results: Children's shame had a significant indirect effect on their interactive peer play, including play-disruption, play-disconnection and play-interactions, mediated by daily stress; children's shame had a significant direct effect on play interaction. However, children's pride did not have a direct effect on daily stress and an indirect effect on their interactive peer play. In other words, high levels of shame among children led to high perceived daily stress. In turn, perceived daily stress increased play-disconnection and play-disruption, while it decreased play-interactions. Meanwhile children's shame led to a low level of play-interaction among young children. Conclusion/Implications: The results imply that children's perceived shame would influence their behaviors in social contexts as well as their psychological wellbeing such as the level of daily stress.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2054-2060
• /
• 2011

The purpose of this paper is to investigate spray characteristics of GDI injector that is economic and environment-friendly. Injector characteristics such as penetration length, spray angle and mixture formation were measured using experimental visualization technique. Especially, it has been analyzed that the influences of ambient pressure and injection pressure on penetration length and spray angle. To visualize the spray, a constant volume combustion chamber and fuel supply system have been manufactured. A high-speed camera and LED light source have been applied to obtain spray images. The experimental and visualization result shows that the penetration length is increased as decreasing ambient pressure and/or increasing injection pressure. Also, ambient pressure and injection pressure have minor effect on the spray angle variation.

• Journal of East-West Nursing Research
• /
• v.11 no.1
• /
• pp.58-64
• /
• 2005

The purpose of this study was to examine impact of hospital computerization on the nursing practice. The study was conducted using the repeated measured design. The subjects were 166 nurses working at surgical nursing care units in a tertiary teaching hospital. A questionnaire was developed based on the Burke's study, and reviewed by a committee for content validity. Eighty-eight nurses responded the questionnaire throughout the study. Indirect nursing care time significantly decreased(p<0.05) after the computerization. These decrease related to time saving in checking physicians' order and writing nursing records. However, the change in direct nursing care time was not clear. In conclusion, the computerization led to the decrease in indirect nursing care time but it did not link to increase in direct nursing care time. Therefore, nurse managers should take into account redesign of the nursing works after computerization.

• Carbon letters
• /
• v.16 no.3
• /
• pp.198-202
• /
• 2015

Carbon-supported Pt catalyst systems containing defect adsorption sites on the anode of direct methanol fuel cells were investigated, to elucidate the mechanisms of H₂ dissociation and carbon monoxide (CO) poisoning. Density functional theory calculations were carried out to determine the effect of defect sites located neighboring to or distant from the Pt catalyst on H₂ and CO adsorption properties, based on electronic properties such as adsorption energy and electronic band gap. Interestingly, the presence of neighboring defect sites led to a reduction of H₂ dissociation and CO poisoning due to atomic Pt filling the defect sites. At distant sites, H₂ dissociation was active on Pt, but CO filled the defect sites to form carbon π-π bonds, thus enhancing the oxidation of the carbon surface. It should be noted that defect sites can cause CO poisoning, thereby deactivating the anode gradually.

• Journal of ILASS-Korea
• /
• v.19 no.1
• /
• pp.9-14
• /
• 2014

Performance of DI diesel engine with high-pressure fuel injection equipment is directly related to its emission characteristics and fuel consumption. So, the electro-hydraulic injector for the common-rail injection system should be designed to meet the precise high fuel delivery control capability. Currently, most high pressure injector in use has a needle driven by the solenoid coil energy or the piezo actuator controlled by charge-discharge of output pulse current. In this study, macroscopic spray approaching method was applied under constant volume chamber to research the performance of three different injectors : solenoid, indirect-acting piezo and direct-acting piezo type for CR direct-injection. LED back illumination for Mie scattering was applied on the liquid spray visible of direct-acting piezo injector, including hydraulic-servo type solenoid and piezo-driven injectors. As main results, we found that a direct-acting piezo injector had better a spray tip penetration than hydraulic-servo injectors in spray visualization.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.4
• /
• pp.13-16
• /
• 2013

A lot of various researches have been going on to use heat spreader for LED module. Nano porous aluminum anodic oxide (AAO) applied LED, which is produced from anodization, is easy and economically advantageous. Convensional LED module is consist of aluminum/adhesive/copper circuit. The polymer adhesive in this module is used as heat spreader. However the thermal emission of LED component is degraded because of low heat conductivity of polymer and also reliability of LED component is reduced. Therefore, AAO in this work was applied to heat spreader of LED module which has higher heat conductivity compare to polymer. Bonding strength between AAO and copper circuit was improved with Ti/Cu seed layer by copper sputtering process (DBC) before the bonding. And this copper circuit has been fabricated by electro plating method. Peel strength of AAO and copper circuit in this work showed range between 1.18~1.45 kgf/cm with anodizing process which is very suitable for high power LED application.

• Journal of the Korean Ceramic Society
• /
• v.50 no.1
• /
• pp.75-81
• /
• 2013

We fabricated translucent opal glass to replace the polycarbonate diffuser in LED lighting systems in order to solve the durability problem. Batch materials of opal glass with a composition of calcium phosphate were created and melted at $1550^{\circ}C$, and the effect of opaqueness was identified by an addition of 1~7% calcium phosphate as an opacifier raw material. As a result, translucent opal glass was obtained by the melting of the mixed batch materials with a composition of more than 5% calcium phosphate glass at $1550^{\circ}C$ for 2 hrs, which had excellent optical properties for the diffuser of a LED lighting system with no dazzling from direct light by a high haze value exceeding 90% and a low parallel transmittance value of about 5%. For the thermal properties, the thermal expansion coefficient was found to be $5.6{\sim}5.9{\times}10^{-6}/^{\circ}C$ and the softening point was $874{\sim}884^{\circ}C$. In addition, good thermal properties such as good thermal shock resistance and feasibility for use with a general manufacturing process during the forming of glass tubes and bulbs were noted. Therefore, it is concluded that this translucent opal glass can be used as a glass diffuser material for LED lighting due to its high heat resistance and high durability as a replacement for a polycarbonate diffuser.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.650-657
• /
• 2012

For the purpose of improving the durability problem, translucent opal glass was fabricated as a substitute for the polycarbonate diffuser of LED lighting. Calcium phosphate was used as an opacifier of opal glass and melted in an electric furnace. The opaque effect was identified according to the change of the cooling procedure. As results, translucent opal glass was obtained by the melting of a batch with a composition of 3.8% calcium phosphate at $1550^{\circ}C$ for 2 hrs and then the cooling of the material in the furnace. For the cooling condition of the glass sample, HTCG (High Temperature Cooled Glass) was found to have better optical properties than LTAG (Low Temperature Annealed Glass). It had excellent optical properties for a diffuser of LED lighting, with no dazzling from direct light due to its high haze value of over 99% and low parallel transmittance value of under 1%. For the thermal properties, it had an expressed thermal expansion coefficient of $5.7{\times}10^{-6}/^{\circ}C$ and a softening point of $876^{\circ}C$; it also had good thermal properties such as good thermal shock resistance and was easy to apply to the general manufacturing process in the forming of glass tubes and bulbs. Therefore, it is concluded that this translucent opal glass can be used as a glass diffuser material for LED lighting with high heat resistance and high durability; this material is suitable as a substitute for polycarbonate diffusers.