• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.335-340
• /
• 2014

Recently, LED (Light Emitting Diode) becomes to be useful to apply for the lightening sources in electric systems and the lightening equipment since the power is less consumed with high efficiency, and the size and the weight of LED are small and light, respectively. The LED is controlled with constant current and SMPS (Switching Mode Power Supply). It is necessary for the LED manufacturer to secure the fundamental technology of designing LED chip, and to study the methodology to improve the power factor (PF) and to design the operational circuit for the development of LED to reduce the power loss in the application of LED lightening. The direct AC (Alternating Current) LED driving circuit, HV9910, is widely used in the industry field. In this paper, it is to evaluate the improved methodology for the power factor and efficiency through simulations when PFC (Power Factor Correction) and Noise Filter are added to HV9910.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.839-842
• /
• 1998

The wide spread of multimedia system demands a large viewin gdesply device which can inform a message to many peoples in open area. This paper is about the design, simulating and testing of a large viewing LED pannel control ASIC(application specific integrated circuit). This LED pannel control ASIC runs on 16 bit microprocessor MC68EC000 and has following functions:16 line interlaced LED pannel controller, memory controller, 16 channel priority inerrupt controller, 2 channel direct memory access controller, 2 channel 12 bit clock and timer, 2 channel infrared remocon receiver, 2 channel RS-232C with 16byte FIFO, IBM PC/AT compatible keyboard interface, battery backuped real time clock, ISA bus controller, battery backuped 256 byte SRAM and watech dog timer. The 0.6micron CMOS sea of gate is used to design the ASIC in amount of about 39,000 gates.

• Journal of Technology Innovation
• /
• v.22 no.3
• /
• pp.37-63
• /
• 2014

This study is intended to demonstrate how different factors induce the Korean government's direct investment in research and development according to the type of business enterprise in Korea. We analyzed that what factors made the government directly invest in research and development by using a total of 18,272 company panel data, which are not limited to specific industries or government-led research and development (R&D) programs. The results showed that the direct investment for R&D by the government led to the increase in the number of researchers in SMEs. For major companies, the direct investment resulted in the increase of sales and company's own R&D expenses. Moreover, this study found that government's direct support for R&D even led to the decrease of SMEs' own R&D expenses; however, this result was not statistically significant. In addition, the most significant factor to increase both SMEs' and major company's own R&D expenses was the sales amount of the company, rather than government's direct investment for R&D. The factor that increases sales was the company's own R&D expenses, rather than government's direct investment for R&D. Through the analysis using Mixed Effects Model, this study suggested the policy should be changed to make SMEs invest in its own R&D expenses, rather than to secure researchers of SMEs by government's direct investment for R&D.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1499-1500
• /
• 2008

최근에 LCD의 후면광원으로 LED를 채용하는 경우가 증가하고 있다. 이러한 LED를 Back Light으로 사용할 경우 일정한 휘도의 유지와 색좌표의 보정은 고급제품의 경우 채용이 증가하고 있다. 본 연구에서는 LCD Monitor용 LED BLU의 CMS(Color Management System)을 개발하기 위하여 1.5W R,G,G,,B가 하나의 PKG에 들어있는 LED를 이용하여 Direct type의 Back Light Unit을 개발하였다. 방열 및 휘도 균일도를 고려하여 LED part를 설계, 개발하였고 LED를 PWM으로 구동하기 위하여 Switching circuit이 포함되는 구동회로 부분을 설계, 개발 하였다. 또한 Color Sensor와 CMS IC를 사용하여 Color를 Control하고 휘도도 컨트롤하는 제어회로 부분도 개발을 하였다. CMS 기능의 제어회로 부분을 개발하기 위하여 MicroController를 사용하였으며 CMS IC와의 통신을 위한 부분도 개발하였다. 이러한 구성을 개발하여 시제품을 직접 제작하였다. 평가를 위하여 성능시험을 실시하였고 광학적인 평가도 시행하였다. 제작된 시제품은 L558 x W359 x H30 으로 하였다. 휘도는 목표휘도를 이루었으며 균일도는 85% 이상이 되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1327-1332
• /
• 2014

This paper presents information about the examples of the design on Illumination of Structures(LED Light Pipe for lighthouse) in Korea. We have applied illumination by flood-lighting or facade-lighting in place of the 57 lighthouses (offshore structures) and 4 beacons. The ways of illumination of structures are using direct illumination with LED, halogen lamps and metal halide lamps, and indirect illumination with LED non-neon lamps. The illumination of structures helps a observer to identify the Aids to Navigation and w aterway. The fabricated LED Light Pipe is a transparent acrylic round bar and easy to install. The Light Pipe is arranged in two rows of L ED (78ea). It can be connected in series. It has 4 colours(Red, Green, Yellow, White). We analyzed and the horizontal divergence angle of the LED light pipe is defined as the range with 50% of maximum luminous intensity. Also, we evaluated the conspicuity on the origin al lantern and LED Light pipe for lighthouse. The field experiment was conducted in 'Yeosuguhang lighthouse' in Yeosu-city (Korea). F rom the experimental results, it was confirmed that the fabricated LED Light Pipe is clearly distinguished.

• Journal of Broadcast Engineering
• /
• v.21 no.1
• /
• pp.76-86
• /
• 2016

This study was investigated whether the perceived depth was changed depending on the measurement methods. In the method of direct comparison, virtual object with one of the various binocular disparities was presented in the frontal space with LEDs which were used for depth estimation for a binocular stimulus, while in the method of indirect comparison, visual object was presented in the frontal space but the LEDs were placed rightward at the angle of 45 degree from the mid-sagittal line. In these experimental setup, the depth of binocular stimulus was directly matched that of LED in direct comparison condition. In indirect comparison condition, however, observer estimated the depth of binocular stimulus, turned one's head rightward to the array of LEDs and turned on the LED which was supposed to be the same depth as binocular stimulus. Additionally, it was investigated whether the perceived depth was different depending on observer's stereo acuity. The results showed that perceived depths measured in the direct comparison were more similar to the depth predicted from geometry than those in the indirect comparison, and that the perceived depths from observers with high stereo acuity were similar to the predicted depth from geometry those from observers with low stereo acuity. These results indicated that stereoscopic depths of the binocular stimuli would vivid and compelling when binocular stimuli was simultaneously presented with real objects in the same visual space, like a mixed reality.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.4
• /
• pp.1-7
• /
• 2013

Optical characteristics including the view angle and color temperature uniformity of LED packages with an integrated lens fabricated by compression molding method are investigated according to lens shape, lens materials, and phosphor coating methods. Four types of lens shape are designed and their optical output power dependence on the refractive index of silicone encapsulant are evaluated. Also, spatial color temperature uniformities of packages fabricated with different phosphor coating methods-direct coating on a chip vs. uniformly mixed with silicone encapsulant- are compared at various view angles. As the result, it is found that phosphor coating method is more effective on color temperature uniformity than lens shape. The maximum color temperature difference of a package with direct coating of phosphor on a chip is 1,340K according to the view angle at the color temperature of 5,000K, and that of a package with uniformly mixed phosphor is 250K, which indicates 1,090K improvement of color uniformity for the latter case.

• Journal of Sensor Science and Technology
• /
• v.5 no.4
• /
• pp.9-15
• /
• 1996

In order to display magnetic signals obtained from a magneto-resistance sensor, a direct current magnetometer was designed and its circuit was constructed. The magnetic fields measured by the home-made magnetometer, which showed good functions of automatic ranging, analog output, and vector sensing, were well agreed with those by commercial MAG-01 magnetometer. The measurement range of the magnetometer was $1\;{\mu}T$ to 1.999 mT, the resolution was -132 dB within 1 Hz bandwidth and the measured magnetic fields could be displayed with $3{\cdot}1/2$-digit LED.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.1
• /
• pp.20-25
• /
• 2014

There are several severe problems for LED device, the next generation's economy green lighting: as the temperature increases, the lamp efficiency decreases; if the temperature is over $80^{\circ}C$, the lifetime of lighting decreases; Red Shift phenomenon that wavelength of spectrum line moves toward long wavelength occurs; and optical power decreases as $T_j$ increases. Thus, Heat sink design that can minimize the heat of LED device is currently in progress. While the thermal resistance of COB Type LED was reduced by direct coupling of LED chip to the board, residential 13.5W requires Heat sink in order resolve heat issue. This study designed Heat Sink suitable for residential 13.5W COB LED down-light and selected the optimum Fin thickness through flow simulation that packaged the designed Heat Sink and 13.5W COB. And finally it analyzed and evaluated the thermal modes using contacting thermometer.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.206-209
• /
• 2003

This paper deals with stand-alone PV power generation system with charge and discharge controller for the LED road sign. Main power source of PV system are generally solar cell and battery. Therefore PV system can be classified into variable types in accordance with connection type between battery and solar sell. Mainly used on of them is direct connection type which has advantage such as simple structure and simple controller. To verify the proposed PV generation system for the LED road sign, the detail simulation and experiment results indicate that operating characteristics are verified by experiment with a laboratory prototype in this paper.