• Journal of Home Health Care Nursing
• /
• v.30 no.2
• /
• pp.194-201
• /
• 2023

Purpose: Post-burn pruritus is one of the most prevalent complications experienced by burn patients. Though medications are prescribed for pruritus, managing this condition can prove challenging. The aim of this research was to develop and disseminate non-pharmacological self-management educational resources, and subsequently evaluate the effectiveness of implementing a percussion therapy approach. Methods: A one-group pretest-posttest design was employed to evaluate the effect of percussion therapy on one hundred patients, all of whom had suffered deep second-degree burns and undergone skin graft surgery. Variables such as the severity of pruritus, distress caused by pruritus, and satisfaction with pruritus treatment were scrutinized. A paired t-test was conducted to compare these variables before and after the intervention. Results: The majority of participants were diagnosed with third-degree burns, and the average Total Body Surface Area (TBSA) affected was 25.2%. Post-test results revealed a marked reduction in both severity and distress caused by pruritus. The intervention led to significant decreases in average severity and pain due to itchiness, and an increase in the satisfaction level following the application of percussion therapy. Conclusions: The implementation of the percussion was identified as effective in diminishing post-burn pruritus, alleviating pruritus-associated pain, and enhancing satisfaction with pruritus treatment. The percussion approach presents itself as a non-invasive, non-pharmacological strategy for managing pruritus in burn patients.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.8
• /
• pp.573-581
• /
• 2019

This study was to investigate the effects of group program on interactions and activity performance and among chronic stroke patients living in the community. This study was performed on 8 chronic stroke patients living in the community for 40 weeks for group program once a week for 60 minutes. group programs consisted of gross motor, fine motor, and cognitive activities that led to interactions among group members. Results were assessed by using the Social Interaction Anxiety Scale(SIAS) and Canadian Occupational Performance Measure(COPM), and evaluation of the task performance and social interaction was conducted. There was statistically significant decrease in social interaction anxiety level of subjects after group program intervention and statistically significant improvement in task performance. In addition, all of the subjects showed positive satisfaction with the program after the intervention. group program provided by the to chronic stroke patients living in the community is a approach that enhances the interacts with the members, task performance of the subjects and helps them design a meaningful life.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.4
• /
• pp.5-17
• /
• 2023

The advancement in large-scale underground excavation in urban areas necessitates monitoring and predicting technologies that can pre-emptively mitigate risk factors at construction sites. Traditionally, two methods predict the deformation of retaining walls induced by excavation: empirical and numerical analysis. Recent progress in artificial intelligence technology has led to the development of a predictive model using machine learning techniques. This study developed a model for predicting the deformation of a retaining wall under construction using a boosting-based algorithm and an ensemble model with outstanding predictive power and efficiency. A database was established using the data from the design-construction-maintenance process of the underground retaining wall project in a manifold manner. Based on these data, a learning model was created, and the performance was evaluated. The boosting and ensemble models demonstrated that wall deformation could be accurately predicted. In addition, it was confirmed that prediction results with the characteristics of the actual construction process can be presented using data collected from ground measurements. The predictive model developed in this study is expected to be used to evaluate and monitor the stability of retaining walls under construction.

• Convergence Security Journal
• /
• v.23 no.1
• /
• pp.125-137
• /
• 2023

Companies that handle sensitive information, led by public institutions, establish separate networks for work and the Internet and protect important data through strong access control measures to prevent cyber attacks. Therefore, systems that involve the junction where the Intranet(internal LAN for work purposes only) and the Internet network are connected require the establishment of a safe security environment through both administrative and technical measures. Mobile Device Management(MDM) solutions to control mobile devices used by institutions are one such example. As this system operates by handling sensitive information such as mobile device information and user information on the Internet network, stringent security measures are required during operation. In this study, a model was proposed to manage sensitive information data processing in systems that must operate on the Internet network by managing it on the internal work network, and the function design and implementation were centered on an MDM solution based on a network interconnection solution.

• Journal of Korea Trade
• /
• v.26 no.4
• /
• pp.63-82
• /
• 2022

Purpose - Drawing on relational institutional theory, we explored how demographic similarity between board members of a firm and newly emerged political elites led to firms' increased financial resource acquisition such as leverage ratio and decreased export intensity amidst the Asian financial crisis. We also studied how a firm's leverage ratio and export intensity can further affect firm profitability and financial credit rating. Design/methodology - We revisited and explored a unique, unprecedented crisis that affected most Korean firms: the Asian financial crisis that coincided with a governmental shift from a conservative to a liberal party. We collected demographic information from 432 listed Korean firms' board members and 43 political elites of the Blue House from 1998-2000 to create a demographic similarity measurement. We collected firms' financial information, built panel data, and used ordinary least squares regression to test our theory. Findings - Our results showed that demographic similarity between a firm's directors and newly emerged politicians had a positive association with a firm's leverage ratio but a negative association with a firm's export intensity. A firm's leverage ratio had a negative relationship with firm performance measured by firm profitability and financial credit rating. A firm's export intensity showed a positive effect on firm performance. Originality/value - We highlighted that during an economic crisis that coincided with a governmental shift and change of leading political actors, firms exerted efforts to survey the environment and build new external stakeholder relationships to cope with the changing landscape. We proposed that in an emerging market like Korea where low levels of trust and favoritism are prevalent across society, one of the relational institutional strategies that firms can employ is the selection of directors with similar demographic characteristics to political elites based on factors including birthplace and school affiliations. We examined the efforts of firms to build political networks with newly empowered political elites during a financial crisis, and the consequences of establishing such networks. We highlighted that during a financial crisis, the demographic similarity between a firm's board members and newly emerged politicians can provide firms with access to financial resources but can also result in poor management and reduced effort to enhance its international competitiveness.

• Journal of Sport and Applied Science
• /
• v.7 no.2
• /
• pp.39-51
• /
• 2023

Purpose: The purpose of this study was to investigate differences in the control process to satisfy spatial and temporal constraints imposed upon the anticipation timing response by analyzing the effect of spatio-temporal accuracy demands on eye movements, response accuracy, and the coupling of eye and hand movements. Research design, data, and methodology: 12 right-handed male subjects participated in the experiment and performed anticipation timing responses toward a stimulus moving at three velocities (0.53m/s, 0.66m/s, 0.88m/s) in two task constraint conditions (temporal constraint, spatial constraint). During the response, response accuracy and eye movement patterns were measured from which timing and radial errors, the latency of saccade, fixation duration of the point of gaze (POG), distance between the POG and stimulus, and spatio-temporal coupling of the POG and hand were calculated. Results: The timing and radial errors increased with increasing stimulus velocity, and the spatio-temporal constraints led to larger timing errors than the temporal constraints. The latency of saccade and the temporal coupling of eye and hand decreased with increasing stimulus velocity and were shorter and longer respectively in the spatio-temporal constraint condition than in the temporal constraint condition. The fixation duration of the POG also decreased with increasing stimulus velocity, but no difference was shown between task constraint conditions. The distance between the POG and stimulus increased with increasing stimulus velocity and was longer in the temporal constraint condition compared to the spatio-temporal constraint condition. The spatial coupling of eye and hand was larger with the velocity 0.88m/s than those in other velocity conditions. Conclusions: These results suggest that differences in eye movement patterns and spatio-temporal couplings of stimulus, eye and hand by task constraints are closely related with the accuracy of anticipation timing responses, and the spatial constraints imposed may decrease the temporal accuracy of response by increasing the complexity of perception-action coupling.

• The korean journal of orthodontics
• /
• v.53 no.2
• /
• pp.125-136
• /
• 2023

Before progress was recently made in the application of temporary anchorage devices (TADs) in bio-mechanical design, orthodontists were rarely able to intrude molars to reduce upper posterior dental height (UPDH). However, TADs are now widely used to intrude molars to flatten the occlusal plane or induce counterclockwise rotation of the mandible. Previous studies involving clinical or animal histological evaluation on changes in periodontal conditions after molar intrusion have been reported, however, studies involving human histology are scarce. This case was a Class I malocclusion with a high mandibular plane angle. Upper molar intrusion with TADs was performed to reduce UPDH, which led to counterclockwise rotation of the mandible. After 5 months of upper molar intrusion, shortened clinical crowns were noticed, which caused difficulties in oral hygiene and hindered orthodontic tooth movement. The mid-treatment cone-beam computed tomography revealed redundant bone physically interfering with buccal attachment and osseous resective surgeries were followed. During the surgeries, bilateral mini screws were removed and bulging alveolar bone and gingiva were harvested for biopsy. Histological examination revealed bacterial colonies at the bottom of the sulcus. Infiltration of chronic inflammatory cells underneath the non-keratinized sulcular epithelium was noted, with abundant capillaries being filled with red blood cells. Proximal alveolar bone facing the bottom of the gingival sulcus exhibited active bone remodeling and woven bone formation with plump osteocytes in the lacunae. On the other hand, buccal alveolar bone exhibited lamination, indicating slow bone turnover in the lateral region.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.3
• /
• pp.91-96
• /
• 2023

To verify the quality of bubbles during the use of quartz glass crucibles (QC), an appropriate accelerated testing method was proposed. The bubble state of discarded waste crucibles obtained from actual Czochralski (Cz) processes was analyzed, and optimal heat treatment conditions were suggested by varying temperature, pressure, and time using the QC test piece. By subjecting the samples to heat treatment at 1450℃, 0.4 Torr, and 40 hours, it was possible to control the bubble size and density to a similar level as those generated in the actual Cz process. In particular, by selecting a relatively lower pressure of 0.4 Torr compared to the typical range of 10~20 Torr applied in the Cz process, the time required for accelerated bubble formation testing could be reduced. However, it was determined that increasing the heat treatment temperature to 1550℃ led to the phenomenon of Ostwald ripening, resulting in larger bubbles and a rapid decrease in density. Therefore, it was concluded that it was not a suitable condition for the desired b ake test.

• Journal of the Korean Orthopaedic Association
• /
• v.54 no.5
• /
• pp.377-383
• /
• 2019

The biomechanics study of the hip is aims to understand and explore the dynamic principles of weight transfer through the hip joint. This basic science knowledge can be applied in a variety of areas, including degenerative joint diseases and hip replacement arthroplasty. In particular, understanding of the biomechanics of the hip has led to the development of materials, design and fixation of implants, and it can be applied in various areas, such as the selection of surgical methods and the location of the implant. Moreover, it is essential to have good knowledge of the biomechanics of the hip to achieve better clinical results for patients. Therefore, this paper introduces the basic knowledge and biomechanical characteristics of a normal hip and hip replacement arthroplasty, which are needed to approach the biomechanics of the hip.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.5
• /
• pp.1433-1449
• /
• 2023

In recent years, the rapid development of social networks has led to a rapid increase in the amount of information available on the Internet, which contains a large amount of sensitive information related to pornography, politics, and terrorism. In the aspect of sensitive image detection, the existing machine learning algorithms are confronted with problems such as large model size, long training time, and slow detection speed when auditing and supervising. In order to detect sensitive images more accurately and quickly, this paper proposes a multiclassification sensitive image detection method based on lightweight Convolutional Neural Network. On the basis of the EfficientNet model, this method combines the Ghost Module idea of the GhostNet model and adds the SE channel attention mechanism in the Ghost Module for feature extraction training. The experimental results on the sensitive image data set constructed in this paper show that the accuracy of the proposed method in sensitive information detection is 94.46% higher than that of the similar methods. Then, the model is pruned through an ablation experiment, and the activation function is replaced by Hard-Swish, which reduces the parameters of the original model by 54.67%. Under the condition of ensuring accuracy, the detection time of a single image is reduced from 8.88ms to 6.37ms. The results of the experiment demonstrate that the method put forward has successfully enhanced the precision of identifying multi-class sensitive images, significantly decreased the number of parameters in the model, and achieved higher accuracy than comparable algorithms while using a more lightweight model design.