• 조명전기설비학회논문지
• /
• 제29권5호
• /
• pp.26-33
• /
• 2015

Secondary optical system designed for LED bulb which emits light in all directions was simulated with Energy Star standards. Components of the optical system were LED light source, the cover of the LED bulb and reflector which is to confirm the diffuser plate and LightTools software was used to design the illumination optics. The main points of the secondary optical system design are the location of the LED light source, the shape of the LED bulb cover, the location of the reflection plate, and the scattering properties of the diffusing plate. Mechanism of the LED bulb is that the light emitted from the light source move on to the backward after reflected by the coated light cover from the inside and then the reflected light is scattered by the diffuser plate. The LED bulb was designed to satisfy the standard light distribution and color specifications of the Energy Star(IES LM-79-08).

• 한국위성정보통신학회논문지
• /
• 제10권1호
• /
• pp.77-82
• /
• 2015

본 논문에서는 LED 형광등에 활용이 가능한 컨버터 관한 연구를 수행하였다. 기존 고효율에너지 기자재로 지정된 형광램프용 고조도 반사갓이 LED 형광램프의 Heat-sink 구조상 활용할 수 없는 구조이기 때문에 LED 형광램프 컨버터의 에너지 효율이 뛰어난 회로 설계 및 보호회로 설계가 필요하다. 따라서 본 논문에서는 직관형 LED램프 컨버터에 회로구동방식을 적용한 LED 형광등 연구를 수행하였다. 또한, LED를 광원으로 한 'LED 램프'와 일반 상용 전원에 접속해 직류 전원을 공급할 수 있는 컨버터에 대하여 설계 및 제작을 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.421-422
• /
• 2010

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.163-170
• /
• 2015

Recently LED fish-attracting lamps have been more widely used in fisheries as low-cost and high-efficiency fishing gear, and development of long-life high-efficiency lamps is required through the design of LED packages to optimize heat resistance. This study developed an improved LED fish-attracting lamp with excellent heat performance, which was verified using a numerical model. Heat-resistance design factors such as the heat-radiation fin shape, PCB type, and LED chip count were investigated and optimized. Comparison with a commercial 180-W LED fishing lamp showed that the increase in initial temperature was 40% higher than that of the surrounding LED chip because of design errors in contact thermal resistance. The 250-W LED lamp developed in this study has a characteristic with thermal rising in linearly stable according to the heat source. In addition, luminance efficiency was improved by 20-65% by using flow-visualization simulation. A decrease of 45% in total power consumption with a fuel-cost reduction of over 55% can be expected when using these optimized heat release design factors.

• 조명전기설비학회논문지
• /
• 제25권6호
• /
• pp.1-8
• /
• 2011

Night-Scape Lighting with the use of LED lighting has become very popular recently by the merits of energy saving, environmental friendlyness, sensitivity and conversion trends. LED lighting designs are being used diversly as outer elements for screen media stage production as well as buildings with fusioning of information technology. However, methods for analyzing the cases effectively are far from completion. This research evaluates the recent trends of Night-Scape Lighting with LED and processes it through database and aims to propose LED Night-Scape Design process for the various architectural night-scape lighting designs.

• 조명전기설비학회논문지
• /
• 제29권11호
• /
• pp.1-5
• /
• 2015

In this paper, we propose the optical system design for a medium sized LED marine lanterns which simplifies the multi-layer structure into a single structure. In order to satisfy the target fixed intensity(35,000cd) and vertical divergence($-2.5^{\circ}{\sim}-4.0^{\circ}$, $+2.5^{\circ}{\sim}+4.0^{\circ}$), we use the total internal reflection collimator lens. And a Monte Carlo simulation has been utilized to optimize a condition of a LED package, TIR lens and outside lens. The computer simulation results indicated that this LED marine lanterns can produce of a fixed intensity(35,382cd) and vertical divergence($-3.1^{\circ}{\sim}+2.5^{\circ}$). Using the this optical system, we achieve the target value of LED lanterns.

• 한국전기전자재료학회논문지
• /
• 제36권3호
• /
• pp.255-260
• /
• 2023

In order to spread LED lighting, LED lighting technology directly driven by alternating current (AC) commercial power has recently been introduced. Since current does not flow at a voltage lower than the threshold voltage of the LED, a non-conductive section occurs in the current waveform, and the higher the threshold voltage of the LED, the more discontinuous current waveforms are generated. In this paper, multi-LED modules are connected in series so that the threshold voltage can be adjusted according to the number of LED modules. A small number of LED modules are driven at a low instantaneous rectified voltage, and a large number of LED modules are driven at a high instantaneous rectified voltage to lengthen the overall lighting time of AC-LED lighting, thereby minimizing the luminance deviation of AC-LED lighting. In addition, the load current flowing through the LED module is adjusted to be the same as the design current even at the maximum rectified voltage higher than the design voltage, so that the light brightness of the LED module is kept constant. Therefore, even if the rectified voltage applied to the LED module changes, the AC-LED lighting in which the light brightness is constant and the luminance deviation is minimal has been realized.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.55-58
• /
• 2004

최근 LED 광원에 의한 컬러조명 연출사례는 급속하게 증가하고 있으나, LED에 의한 광색 선택과 관련된 연구는 거의 없는 실정이다. 본 연구는 3원색 LED를 사용한 광색 생성기를 제작하여 복수의 응답자로 하여금 스스로 조각하여 선호하는 컬러를 만들게 하고 이를 디지털 색채색차계로 측정하여 CIE1964색도도표에 기록하였다. 연구결과 일정한 광색 선호도 그룹이 형성되었으며, 이는 향후 LED를 사용하는 조명설계 뿐 만 아니라 디지털로 제어되는 컬러 조명연출 설계시 적용되어 활발하게 응용될 것으로 기대한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.15-15
• /
• 2009

In many applications for display with LED, the thermal behavior of LED is most important issue in view of thermal management. The optical requirements of the displays for various applications make the designer to drive the LED at or over their on-design condition to achieve performances requested by users. In practical cases of large-sized TV with LED back light unit (BLU), the problem of increasing LED temperature can affect the reliability of LED itself and the optical performances of BLU as an assembly of LED. In this paper, the thermal management design of LED back light unit(BLU) for large-sized TV was performed

• 조명전기설비학회논문지
• /
• 제27권9호
• /
• pp.1-5
• /
• 2013

We developed high-efficient 6W-LED package with simple structure by applying Heat Slug and silicone-reflector. LED package was manufactured in $8.5{\times}8.5mm$ sized multi-chip structure having thickness of $500{\mu}m$ achieved by bonding silicon-reflector with prepreg on top of the plate after implementing the reflector placed on copper substrate Half Etching by thickness of $200{\mu}m$. The luminous flux, luminous efficacy, correlated color temperature, color rendering index and thermal resistance of developed LED was evaluated, and it verified the application of products by applying it to 120W-LED road luminaires through simulation. The luminous efficacy of LED package reached over 130lm/W, and it is possible to be manufactured into 120W-LED road luminaires using 18 packages. In addition, the simulation results showed average of horizontal illuminance and overall illuminance uniformity that is suitable for three-lane road.