Journal of the Korean Society of Marine Environment & Safety
/
v.29
no.7
/
pp.902-909
/
2023
This study evaluated the performance test of a small-sized LTE-Maritime(LTE-M) transceiver that was developed and promoted to expand the use of intelligent maritime traf ic information services led by the Ministry of Oceans and Fisheries with the aim of supporting the prevention of maritime accidents. Accoriding to statistics, approximately 30% of all marine accidents in Korean water occur with ships weighing less than 3 tons. Therefore, the blind spots of maritime safety must be supplemented through the development of small-sized transceivers. The small transceiver may be used in fishing boats that are active near coastal waters and in water leisure equipment near the coastline. Therefore, verifying whether sufficient performance and stable communication quality are provided is necessary, considering the environment of their real usage. In this study, we reviewed the communication quality goals of the LTE-M network and the performance requirements of small-sized transceivers suggested by the Ministry of Oceans and Fisheries, and proposed a test plan to appropriately evaluate the performance of small-sized transceivers. The validity of the proposed test method was verified for six real-sea areas with a high frequency of marine accidents. Consequently, the downlink and uplink transmission speeds of the small-sized LTE-M transceiver showed performances of 9 Mbps or more and 3 Mbps or more, respectively. In addition, using the coverage analysis system, coverage of more than 95% and 100% were confirmed in the intensive management zone (0-30 km) and interesting zone (30-50 km), respectively. The performance evaluation method and test results proposed in this paper are expected to be used as reference materials for verifying the performance of transceivers, contributing to the spread of government-promoted e-navigation services and small-sized transceivers.
International Journal of Computer Science & Network Security
/
v.24
no.4
/
pp.163-169
/
2024
India is a developing nation and has come with comprehensive way in modernizing its reducing poverty, economy and rising living standards for an outsized fragment of its residents. The STEM (Science, Technology, Engineering, and Mathematics) education plays an important role in it. STEM is an educational curriculum that emphasis on the subjects of "science, technology, engineering, and mathematics". In traditional education scenario, these subjects are taught independently, but according to the educational philosophy of STEM that teaches these subjects together in project-based lessons. STEM helps the students in his holistic development. Youth unemployment is the biggest concern due to lack of adequate skills. There is a huge skill gap behind jobless engineers and the question arises how we can prepare engineers for a better tomorrow? Now a day's Industry 4.0 is a new fourth industrial revolution which is an intelligent networking of machines and processes for industry through ICT. It is based upon the usage of cyber-physical systems and Internet of Things (IoT). Industrial revolution does not influence only production but also educational system as well. IoT in academics is a new revolution to the Internet technology, which introduced "Smartness" in the entire IT infrastructure. To improve socio-economic status of the India students must equipped with 21st century digital skills and Universities, colleges must provide individual learning kits to their students which can help them in enhancing their productivity and learning outcomes. The major goal of this paper is to present a low cost, effective learning mechanism for STEM implementation using Raspberry Pi 3+ model (Single board computer) and Node Red open source visual programming tool which is developed by IBM for wiring hardware devices together. These tools are broadly used to provide hands on experience on IoT fundamentals during teaching and learning. This paper elaborates the appropriateness and the practicality of these concepts via an example by implementing a user interface (UI) and Dashboard in Node-RED where dashboard palette is used for demonstration with switch, slider, gauge and Raspberry pi palette is used to connect with GPIO pins present on Raspberry pi board. An LED light is connected with a GPIO pin as an output pin. In this experiment, it is shown that the Node-Red dashboard is accessing on Raspberry pi and via Smartphone as well. In the final step results are shown in an elaborate manner. Conversely, inadequate Programming skills in students are the biggest challenge because without good programming skills there would be no pioneers in engineering, robotics and other areas. Coding plays an important role to increase the level of knowledge on a wide scale and to encourage the interest of students in coding. Today Python language which is Open source and most demanding languages in the industry in order to know data science and algorithms, understanding computer science would not be possible without science, technology, engineering and math. In this paper a small experiment is also done with an LED light via writing source code in python. These tiny experiments are really helpful to encourage the students and give play way to learn these advance technologies. The cost estimation is presented in tabular form for per learning kit provided to the students for Hands on experiments. Some Popular In addition, some Open source tools for experimenting with IoT Technology are described. Students can enrich their knowledge by doing lots of experiments with these freely available software's and this low cost hardware in labs or learning kits provided to them.
Journal of the Institute of Electronics Engineers of Korea SP
/
v.44
no.3
/
pp.33-41
/
2007
Owing to the development of multimedia and communication technologies, multimedia data become a common feature of the information systems and are on the increase. This has led to the need of 3D shape retrieval systems that, given a query object, retrieve similar 3D objects. Therefore, shape descriptor required to describe a 3D object effectively and efficiently. In this paper, a new descriptor for 3D model retrieval based on shape information is proposed. The proposed descriptor utilizes the curvedness together with the shape index that provides local geometry information. The existing 3D Shape Spectrum Descriptor (3D SSD), which is defined as the histogram of shape index values, represents the characteristics of local shapes of the 3D surface. However, it does not properly represent the local shape characteristics, because many points with different curvedness may have the same shape index value. Therefore, we add a new feature that represents the degree of curvedness, thereby improving the discriminating power of the shape descriptor. We evaluate the performance of the proposed method, compared with the previous method. The experimental results have shown that the performance of retrieval has been improved by 23.6%.
As with the vast array of computer technology and its rapid development, along with the entry of the internet as one of the necessities of life, the so-called cyber space has become a vital component of our modern day living. While such cyber space has provided the society with much convenience and utility as to the gathering and acquiring of information, crimes involving cyber space has accordingly increased in both number and form, Nevertheless, the conventional law as existed before the development of the cyber space were unable to meet the demands of this new breed of crime, which inevitably led to the gap in the government ability to punish such criminals, Thus, in response to the rising number of cyber crimes, a large number of nations have either created or is in the process of committing human and financial resources to strengthen the investigative powers relating to cyber crimes and creating a new area of prohibiting such crimes. As a overview of cyber crime, (1)defines the terms, describes features of cyber crime, (2)explains the international prevention necessity of cyber crime, and (3)the necessity of legislating the cyber crime Fundamental Act (4)the recognition of the evidential values on the confiscated electronic records and reviews types of cyber crime including cyberterror. Lastly, emphasizes necessity on international cooperation for prevention of cyber crime as usual.
KIPS Transactions on Computer and Communication Systems
/
v.2
no.9
/
pp.381-392
/
2013
During the last decade, the multitude of advances attained in terminal computers, along with the introduction of mobile hand-held devices, and the deployment of high speed networks have led to a recent surge of interest in Quality of Service (QoS) for video applications. The main difficulty is that mobile devices experience disparate channel conditions, which results in different rates and patterns of packet loss. One way of making more efficient use of network resources in video services over wireless channels with heterogeneous characteristics to heterogeneous types of mobile device is to use a scalable video coding (SVC). An SVC divides a video stream into a base layer and a single or multiple enhancement layers. We have to ensure that the base layer of the video stream is successfully received and decoded by the subscribers, because it provides the basis for the subsequent decoding of the enhancement layer(s). At the same time, a system should be designed so that the enhancement layer(s) can be successfully decoded by as many users as possible, so that the average QoS is as high as possible. To accommodate these characteristics, we propose an efficient transmission scheme which incorporates SVC-aware dual-channel repetition to improve the perceived quality of services. We repeat the base-layer data over two channels, with different characteristics, to exploit transmission diversity. On the other hand, those channels are utilized to increase the data rate of enhancement layer data. This arrangement reduces service disruption under poor channel conditions by protecting the data that is more important to video decoding. Simulations show that our scheme safeguards the important packets and improves perceived video quality at a mobile device.
This paper describes the performance evaluation and analysis of an Orthogonal Frequency-Division Multiplexing (OFDM) system having the least Inter Symbol Interference (ISI) in a multi-path fading channel environment. Wireless Local Area Network (W-LAN) in accordance with IEEE 802.11a and IEEE 802.11b provides high-speed transmission to universities, businesses and other various places. In addition, service providers can offer a public W-LAN service on restricted areas such as a subway. The proliferation of W-LAN has led to greater W-LAN service demands, but problems are also on the rise in offering a good W-LAN service. In particular, urban areas with high radio wave interference and many buildings are vulnerable to deteriorated QoS including disconnected data and errors. For example, when high-speed data is transmitted in such areas, the relatively high frequency generates ISI between Access Points (AP) and Mobile Terminals (such as a notebook computer), leading to a frequency selective fading channel environment. Consequently, it is difficult to expect a goodW-LAN service. The simulation proves that the OFDM system enables W-LAN to implement QoS in high-speed data transmission in a multi-path fading channel environment. The enhanced OFDM performance with 52 sub-carriers is verified via data modulation methods such as BPSK, QPSK and 16QAM based on IEEE 802.11a and punched convolutional codes with code rate of 1/2 and 3/4 and constraint length of 7. Especially, the simulation finds that the OFDM system has better performance and there is no data disconnection even in a mobile environment by applying a single tap equalizer and a decision feedback equalizer to a mobile channel environment with heavy fading influence. Given the above result, the OFDM system is an ideal solution to guarantee QoS of the W-LAN service in a high-speed mobile environment.
The purpose of this study is to analyze the relationship between export weight, import weight, export amount, import amount, and trade balance of ICT industry. The data used were gathered from the Korea Customs Service trade statistics. The analysis period used annual data for 19 years from 2000 to 2018. The change rate analysis was shown in order of trade balance, export amount, import amount, import weight and export weight. The increase rate analysis showed that the trade balance was the highest at 919%.. In the correlation analysis, the trade balance and export amount were 0.95, showing the highest correlation coefficient. As a result of the regression analysis, the export amount for the trade balance, the dependent variable, was Coefficient 2.37, which was positive(+). Each variable is changing independently of one another. Since 2000, the trade balance of the Korean ICT industry has led 84% of Korea's total trade balance. In the future, Korea's ICT industry should be further developed for Korea's economic development, and exports should be further increased to increase the trade balance. In the next paper, we will try to find a field that can be specifically developed by subdividing the ICT industry.
Kim, Sang-Gi;Yu, Seong-Uk;Gu, Jin-Geun;Na, Gyeong-Il;Park, Jong-Mun;Yang, Il-Seok;Kim, Jong-Dae;Lee, Jin-Ho
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.108-108
/
2011
최근 에너지 위기와 환경 규제 강화 및 친환경, 녹색성장 등의 이슈가 대두되면서 에너지 절감과 환경보호 분야에 그린 전력반도체 수요가 날로 증가되고 있다. 이러한 그린 전력반도체는 휴대용컴퓨터, 이동통신기기, 휴대폰, 조명, 자동차, 전동자전거, LED조명 등 다양한 종류의 전력소자들이 사용되고 있으며, 전력소자의 수요증가는 IT, NT, BT 등의 융복합기술의 발달로 새로운 분야에 전력소자의 수요로 창출되고 있다. 특히 환경오염을 줄이기 위한 고전압 대전류 전력소자의 에너지 효율을 높이는 연구 개발이 활발히 진행되고 있다. 종래의 전력소자는 평면형의 LDMOS나 VDMOS 기술을 이용한 소전류 주로 제작되어 수십 암페어의 필요한 대전류용으로 사용이 불가능하다. 반면 수직형 전력소자인 트렌치를 이용한 power 소자는 집적도를 증가 시킬 수 있을 뿐만 아니라 대전류 고전압 소자 제작에 유리하다. 특히 평면형 소자에 비해 약 30%이상 칩 면적을 줄일 수 있을 뿐만 아니라 평면형에 비해 on-저항을 낮출 수 있기 때문에 수요가 날로 증가하고 있다. 트렌치 게이트 power MOS의 중요한 게이트 산화막 형성 기술은 트렌치 내부에 균일한 두께의 산화막 형성과 높은 신뢰성을 갖는 게이트 산화막 형성이 매우 중요하다. 본 연구에서는 전력소자를 제조하기 위해 트렌치 기술을 이용하여 수직형 전력소자를 제작하였다. 트렌치형 전력소자는 게이트 산화막을 균일하게 형성하는 것이 매우 중요한 기술이다. 종래의 수평형 소자 제조시 게이트 산화막 형성 후 산화막 두께가 매우 균일하게 성장되지만, 수직형 트렌치 게이트 산화막은 트렌치 내부벽의 결정구조가 다르기 때문에 $1000^{\circ}C$에서 열산화막 성장시 결정구조와 결정면에 따라 약 35% 이상 열산화막 두께가 차이가 난다. 본 연구는 이러한 문제점을 해결하기 위해 트렌치를 형성한 후 트렌치 내부의 결정구조를 변화 및 산화막의 종류와 산화막 형성 방법을 다르게 하여 균일한 게이트 산화막을 성장시켜 산화막의 두께 균일도를 향상시켰다. 그 결과 고밀도의 트렌치 게이트 셀을 제작하여 제작된 트렌치 내부에 동일한 두께의 게이트 산화막을 여러 종류로 산화막을 성장시킨 후 성장된 트렌치 내벽의 산화막의 두께 균일도와 게이트 산화막의 항복전압을 측정한 결과 약 25% 이상 높은 신뢰성을 갖는 게이트 산화막을 형성 할 수 있었다.
Journal of The Korean Association For Science Education
/
v.35
no.5
/
pp.885-893
/
2015
In this study, we compared the use of information and communications technology (ICT) by middle school teachers in Korea and other countries utilizing the teacher survey data of the IEA International Computer and Information Literacy Study (ICILS) 2013. The ICILS target population consisted of all students in the eighth grade. We compared Korea with Australia, the Czech Republic, Norway, and Poland, which are nations showing the highest achievements in computer and information literacy. We selected nine questions from the teacher questionnaire and divided them into the categories of computer use, use of ICT for teaching and learning, and the ICT support environment in school. In comparison to their counterparts in other countries, Korean middle school science teachers used computers frequently and also had high ICT self-efficacy. They were confident in their ability to use computers for general tasks, but not in their ability to use computers for teaching and learning. The Korean teachers also had a high percentage of utilization of presentation and graphics software. Also, the proportion of activities concerning the information provided and teacher-led tasks was high, but the proportion of activities for student collaboration or peer interaction was low. In Korea, middle school science teachers had more negative than positive views of using ICT in teaching and learning. The teachers thought that computer-related resource support and digital learning materials were insufficient and that the computer model was outdated in schools. Therefore, we propose to build an ICT infrastructure and to develop and disseminate ICT teaching and learning methods for student activities.
Journal of the Economic Geographical Society of Korea
/
v.17
no.4
/
pp.718-742
/
2014
The capitalist economic process of glocalization and development of transportation and communication technology have led us to the significance of network city as well as concepts of global city, megacity region, etc. Network city theory pursues development of both individual cities and of the region of those cities through strengthening of mutual connectivity among them with specialized industries. On the basis of network city theory, this paper is to analyze specialized industries of cities and connectivity among them in the Youngnam region in S. Korea. It uses the methods of locational quotient, locational Gini coefficient, and shift-share method to analyze specialized industries of cities, and correspondence analysis, global and local Moran's I to examine connectivity among cities. As results, it can be identified that each city in the Youngnam region has its own specialized industries different from each others, but it seems not easy to grasp the overall extent of connectivity among them, partly because of the limitations of applied analysis methods and partly because of a lack of connectivity among cities themselves.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.