• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.11a
• /
• pp.81-84
• /
• 2012

이 논문은 LED 조명을 방송용 광원으로 실용화하는 과정에서 필수적으로 고려해야 할 기술적 측면에 대한 고찰이다. 방송용 LED 광원의 실용화를 위한 기술적 개발은 사실적이고 자연스러운 영상, 특히 방송 영상의 대부분을 차지하는 인물의 얼굴색을 사실적으로 재현하는 것을 목표로 한다. 이 목표를 달성하려면 LED 조명의 고효율과 분광분포 특성이 최대한으로 자연광에 가까워야 한다. LED를 스튜디오 방송조명의 광원으로 활용하기 위해서는 조도, 연색성, 색온도, 색공간, 디밍 커브, 배광 곡선, 소음과 관계한 구체적인 기술적 특성이 요구되고 있다.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.3
• /
• pp.66-74
• /
• 2014

In this paper, the performance of Hybrid Dimming control system for Daylighting system is evaluated by accredited tests. The system controls the balance of illuminance of daylight between daylight system and LED light system. It makes the normal illuminance of interior without the effects of weather by controlling the LED depending on the brightness of outside. For the tests, 6 diffusers($600{\times}300mm$) were installed in lighting area($36m^2$) and normal operation of the system sensors were tested about the interference of sunlight. The results of the examinations were satisfied with the criteria of accredited tests. Further research is the verification of energy saving effect by comparing the Hybrid Dimming control system to current artificial light system.

• Journal of Digital Convergence
• /
• v.10 no.4
• /
• pp.37-43
• /
• 2012

LED TV integration test unit are the equipment for testing LED BLU as LED BLU's operation, error check, AGING work. The previous test unit were inconvenient because it must change test unit in production line according to LCD's kind and size. This paper develops by integration style test unit that can accommodate various LED TV BLU model of 32 ~ 52 inch that is not one LED TV BLU model. We make that output current is various to dimension of 80 ~ 215 mA. We make functions that are LED BLU state check, Diming and heat occurrence mitigation. Also we develop firmware program and that the program can be upgraded and that can support new panel.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.109-113
• /
• 2011

This paper analyzes the noise sources of an LED lighting module with TRIAC dimming control and proposes an improved EMI filter design for the reduction of conducted noise emission. TRIAC dimming invokes problems of input oscillation and capacitor overvoltage at the lighting module. The proposed double LC filter reduces high noise level from the circuit. The experimental and simulation results show that this approach can make significant contributions to the reduction of conducted noise emission from an LED lighting module with TRIAC dimming control.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4740-4744
• /
• 2012

The purpose of this paper was to make a LED light control module using Zigbee. The module was made so that brightness of the LED light changes according to the ambient brightness. A 8-bit microcontroller was used to implement the module to enable LED dimming and wireless light intensity measurement. Using the proposed method, power consumption can be improved by up to 48% on average, with 3.4-0.4W changes in power. The measured ambient light intensity values are converted from analog to digital and outputted as a PWM waveform. According to the output waveform and changes in the current outputted from the LED driver, the brightness of the LED light is controlled. Also, Zigbee with close-range wireless communication capabilities was used to enable wireless transmission of light intensity measurements.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.3
• /
• pp.243-250
• /
• 2009

This paper provides an novel two-stage LED driver circuit for LED lighting equipment. The proposed driver circuit reduces voltage stress in LED driver circuit by using multi-level output voltage of PFC flyback converter. The proposed circuit satisfies IEC61000-3-2 class C regulation that is applied to lighting equipment over 25W and uses PWM to control brightness of wide extent. In this paper, the principle of proposed driver circuit is presented. A prototype has been built and tested. The experimental results are presented to show the validity of the proposed circuit.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.235-242
• /
• 2014

LED lighting control technique is one of the ongoing research areas for efficient management of LED lighting. In this paper, we design and implementation of LED street lighting remote control system which have a wired and wireless communication function for LED street lighting remote control. The implemented system can automatically dimming and individual(or consolidated) LED street lighting via RS-485/422 or Wi-Fi. In experimental results, the implemented remote control system was satisfactory for all of the desired functions.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.559-560
• /
• 2009

네트워크를 이용한 LED 조명의 제어는 최근 IP(Internet Protocol)을 이용한 조명 제어와 융합되어 단순한 디밍(Dimming)제어 뿐만 아니라, 미디어 파사드(Media facade), 카이네틱 아트(Kinetic Art)등의 새로운 조명 분야로 범위가 확대 되고 있다. 본 논문에서는 다양화 되는 네트워크 기반의 제어 방식 중 DMX over IP 에 대하여 멀티케스트-다중화 방식(Multicast & Multiplexing)으로 분석 및 시뮬레이션 하였다. 그 결과 1 만개 이상의 채널 수를 가지는 규모가 큰(large volume) 조명 네트워크 시스템의 경우 채널의 개수 증가가 delay-throughput 에 영향이 적음을 알 수 있다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.4
• /
• pp.1-9
• /
• 2010

An LED driving and control circuit has been developed. The LED driver has a new PWM circuit for current control of LED columns with dimming, current and thermal control, and communication functions. The PWM circuit is composed of two ring oscillator and one counter which can be constructed using basic digital logic components. In addition, it has the functions of remote control mode such as ON, OFF, emergency and power saving modes by the serial communication. The PWM generator and control circuit have been designed and fabricated 0.35[${\mu}m$] Magnachip/Hynix digital IC fabrication process. The LED driving and control board using the developed chip is fabricated and tested successfully.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.351-354
• /
• 2012

본 연구는 LED 조명제어시스템(LMS)을 이용해서 관리자가 원하는 목표전력량과 LED 조명의 구역별 중요도에 따라 Priority 를 설정 후 실시간으로 전력량을 측정해서 Overload(목표전력량 80% 이상 초과 1 단계, 90% 이상 2 단계) 상황 발생 시 자동으로 LED 조명전력을 차단 또는 디밍함으로써 정전에 대비하고 에너지절감도 가능한 알고리즘과 실증결과에 관한 연구내용을 소개한다.