• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.3
• /
• pp.1-9
• /
• 1973

Gallium phosphide light emitting diode (LED) has been fabricated first time for pilot lamp and numeric display purposes. Bright red light is obtained in forward bias at very low current of one to five mA. A typical p-n junction is formed by liquid phase epitaxial growth on a n-type gallium physphide substrate. The crystal growth is achieved at about 1300$^{\circ}$K after the equilibrium of the gallium solution followed by tipping operation. The ohmic contact is made by wire bonding by thermal compression technique. The entire process is well fit for laboratory scale to fabricate a few hundred diodes for mainly demonstration purpose. For mass production, a large sum of the capital investment is required. The great merit of gallium phosphide LED is at low current operation, and green light emission is also obtainable by nitrogen doping.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.113-118
• /
• 2010

In this paper, We proposed remote dimming control system for Light Emitting Diode(LED) street light using Power Line Communication(PLC). LED will be used widly by indoor or outdoor lighting because of semi-permanent life and environment restriction. For energy saving of street light, the dimming control system is very necessary and the PLC is a very efficient technique. Thus, in this paper we proposed the remote dimming control system for LED street light using PLC. A performance of the proposed system was validated by experimental results.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.3
• /
• pp.165-170
• /
• 2012

This study was conducted to evaluate the effect of light spectrum using red (660 nm), blue (460 nm), red and blue mixed (Red : Blue = 6 : 4) LED (light-emitting diode), and fluorescent lamp on antioxidant activities and functional components of dandelion (Taraxacum officinale). Total polyphenol contents in dandelion irradiated with the red and blue mixed or the red LED were 121.77 mg/100 g or 115.36 mg/100 g, respectively, which were greater than those in dandelion treated with blue LED and fluorescent lamp. Asparagine showed the highest content among amino acids in leaves and roots regardless of treatments. Total amino acid was the highest when illuminated with the red LED. DPPH (1,1-diphenyl-2-picrylhydrazyl) radical-scavenging activity and SOD (super oxide dismutase) activity of ethanol extracts were increased under all of the LED treatments compared with fluorescent lamp, and the antioxidant activities were increased by the red and the mixed LED illumination. The results indicate that application of the red and the mixed LED illumination promote antioxidant activity and increase functional components during cultivation of dandelion.

• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.226-229
• /
• 2013

This study was carried out to elucidate suitable wavelength of light during development of fruit body in Lentinula edodes. The four colors of LED(Light Emitting Diode), blue, green, red and yellow, were irradiated for formation of fruit-body. The effect of color of LED at all growth stage, the lightness of cap showed darker in blue and green LED irradiation than that of red and yellow LED. The longer stipe were resulted in longer wavelength. And the activity of anti-oxidant did not showed big differences according to LED wavelength. We obtained higher commercial yields and lower ratio of abnormal fruit body in green LED than those in control(fluorescent lamp).

• Advanced Industrial SCIence
• /
• v.3 no.3
• /
• pp.14-19
• /
• 2024

Currently, micro LEDs (Light Emitting Diode) are attracting attention in the lighting field along with next-generation displays and have advantages such as high luminance, operating speed, energy efficiency, and long-term driving. It is predicted to bring new innovations in smartphones, televisions, and wearable electronic devices. These micro displays are self-luminous displays that emit light by themselves by being implemented as pixels composed of micrometer-sized LED devices. The main manufacturing processes can be divided into crystal growth, patterning and etching, chip separation and transfer, bonding and wiring, panel assembly and encapsulation, inspection, and quality management. Recently, this technology has developed at a rapid pace, and companies are expanding their investments in these fields. According to recent market research results, the micro LED display market is expected to continue to grow, and the main development direction of development can be summarized as manufacturing process improvement, material innovation, and driving technology development. It is believed that commercialization will accelerate through these studies and lead to innovation in the display industry with high performance and various application possibilities.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.6
• /
• pp.830-837
• /
• 2016

The purpose of this study was to investigate the effect of monochromic light-emitting diode (LED) light with different color on the growth and reproductive performances of white Roman breeder geese. A randomized complete batch design was utilized for the trial, and the replicate was regarded as one batch. Twenty ganders and fifty-five dames were used in batch 1 (started on 2011/6/17 and ended on 2012/1/31), thirty ganders and eighty-four dames were used in batch 2 (started on 2012/3/23 and ended on 2012/10/26), and thirty ganders and seventy-two dames were used in batch 3 (started on 2013/3/12 and ended on 2013/12/20). Two hundred and ninety-one geese were randomly assigned to 6 rooms in an environmentally controlled house. They were randomly allotted into one of three monochromatic light treatments: Blue, red, or white. The results showed that there was no significant difference in body weight among the three lighting groups at any point throughout the experimental period. However, compared to the blue light group, significantly more eggs were produced by the red and white light groups (p<0.05). Furthermore, the laying period of the red light group was significantly longer than that of other two groups (p<0.05). In conclusion, our results suggested that red LED-light has the best effect on reproductive performance (i.e. longer laying period and higher total eggs number) at 30 lux light intensity, and is therefore a better choice for the management of breeding geese than blue or white LED-light.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.1
• /
• pp.42-46
• /
• 2011

Light can be divided into ultraviolet rays, visible rays, and infrared rays depending on the wavelengths. Visible rays with specific wavelength are those predominantly used for would treatment. Especially low level laser irradiates into cells, effectively stimulating cellular tissues and activating cellular function. This study was intended to verify the effect of white LED irradiation therapy on wound recovery in animal tests by applying white LED irradiator, which was independently designed and developed to emit beams of similar wavelength to that of a laser. The designed LED Irradiator was used to find out how white LED light source affected the skin wound of SD-Rat(Sprague-Dawley Rat). We divided the participants into two groups; white LED irradiation group which was irradiated 1 hour a day for 9 consecutive days, and none irradiation group. The results showed that the study group had lower incidence of inflammation and faster recovery, compared with the control group.

• Journal of Sensor Science and Technology
• /
• v.29 no.3
• /
• pp.180-186
• /
• 2020

In this study, we applied edge-pulse modulation to prevent the flicker of light-emitting diode (LED) light in a visible light identification system. In the visible light transmitter, positive pulses were transmitted at the edges of the low-to-high transition points, and negative pulses were transmitted at the edges of the high-to-low transition points of the non-return-to-zero (NRZ) data waveforms. In the visible light receiver, the NRZ waveforms were regenerated by making low-to-high and high-to-low transitions at the point of the positive and negative pulses, respectively. This method has two advantages. First, it ensures that the LED light is flicker-free because the average optical power of the LED was kept constant during data transmission in the transmitter. Second, the 120 Hz optical noise from the adjacent lighting lamps was easily cut off using a simple RC-high pass filter in the receiver.

• Journal of Photoscience
• /
• v.11 no.1
• /
• pp.35-40
• /
• 2004

[Ru(2,2'-bipyridine)$_2$(4,4'-dicarboxy-2,2'-bipyridine)]$^{2+}$(RuBDc) is a very photostable probe that possesses favorable photophysical properties including long lifetime, high quantum yield, large Stokes' shift, and highly polarized emission. To evaluate the usefulness of this luminophore (RuBDc) for studying macromolecular dynamics, its intensity and anisotropy decays when conjugated to RNA bacteriophage MS2 were examined using frequency-domain fluorometry with a high-intensity, blue light-emitting diode (LED) as the modulated light source. The intensity decays were best fit by a sum of two exponentials, and the mean intensity decay time was 442.2 ns. The anisotropy decay data showed a single rotational correlation time (2334.9 ns), which is typical for a spherical molecule. The use of RuBDc enabled us to measure the rotational correlation time up to several microseconds. These results indicate that RuBDc can be useful for studying rotational diffusion of biological macromolecules.s.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.4
• /
• pp.39-43
• /
• 2004

The parallel multi-quantum well structures of blue and amber lights were designed and grown in metal-organic chemical vapor deposition by utilizing integration process on epitaxial layers. Samples were deposited for 5 periods-InGaN multi-quantum well layers for blue light emission and partially etched in order to regrow the 3 periods-InGaN multi-quantum wells for amber light. The blue and amber photoluminescence spectra were observed at the peak wavelengths of 475 and 580 nm, respectively. The chromatic coordinates of the white emitting diode were 0.31 and 0.34.