• International journal of advanced smart convergence
• /
• v.6 no.1
• /
• pp.50-56
• /
• 2017

Wireless sensor nodes have limited energy, so it is important to optimize energy consumption to preserve network lifetime. Various protocols have been proposed for this purpose. LEACH protocol and SEP are the representative protocols. These protocols become less effective as the Sensor Field becomes wider. To improve this, MR-SEP and L-SEP were proposed. These protocols increase the energy efficiency by dividing the Sensor Field into layers and reducing the transmission distance. However, when dividing a layer, there are cases where it is divided inefficiently, and a node within a certain range from a Base Station has a better transmission efficiency than a direct transmission method using a cluster method. In this paper, we propose a Single-hop layer for L-SEP to improve inefficient layer division and near node transmission efficiency. When the larger the Sensor Field, the better the performance of the proposed method by up to 87%. The larger the sensor field, the more efficient the proposed method is over the conventional method. That is, the proposed method is suitable for the wide Sensor Field.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.535-538
• /
• 2010

In this paper, this study goal is development for WSN-based fire prevention systems of using temperature/humidity Sensor. So, distributed sensor nodes structural and packet transfer characteristics study for fire monitoring. Battery-operated wireless sensor networks is data transfer manner of multi-hop. WSN fire prevention system need to sensor nodes management and energy consumption of efficient adjust for sustained action. Thus, study with efficient energy consumption the normal WSN environment is not, characteristics for WSN fire prevention environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.2
• /
• pp.25-30
• /
• 2010

Wireless sensor networks is composed of many similar sensor nodes with limited resources. They are randomly scattered over a specific area and self-organize the network. For guarantee of network life time, load balancing and scalability in sensor networks, sensor networks needs the clustering algorithm which distribute the networks to a local cluster. In existing clustering algorithms, the cluster head selection method has two problems. One is additional communication cost for finding location and energy of nodes. Another is unequal clustering. To solve them, this paper proposes a novel cluster head selection algorithm revised previous clustering algorithm, LEACH. The simulation results show that the energy compared with the previous clustering method is reduced.

• Korean journal of applied entomology
• /
• v.52 no.1
• /
• pp.13-21
• /
• 2013

The Genus Cis Latreille known as fungivorous ciids is taxonomically reviewed for the first time from Korea. Six unrecorded species - Cis boleti (Scopoli, 1763); Cis seriatopilosus Motschulsky, 1861; Cis mikagensis Nobuchi & Wada, 1955; Cis jezoensis Nobuchi, 1960; Cis sasajii Kawanabe, 2001; Cis hieroglyphicus Reitter, 1877- are present. All of Cis members are associated with the fruiting body of higher fungi. The author provides the taxonomical information and the ecological information on the host fungi of the Korean Cis species.

• International journal of advanced smart convergence
• /
• v.9 no.2
• /
• pp.185-194
• /
• 2020

Designing of a hierarchical clustering algorithm is one of the numerous approaches to minimize the energy consumption of the Wireless Sensor Networks (WSNs). In this paper, a homogeneous and randomly deployed sensor nodes is considered. These sensors are energy constrained elements. The nominal selection of the Cluster Head (CH) which falls under the clustering part of the network protocol is studied and compared to Low Energy Adaptive Clustering Hierarchy (LEACH) protocol. CHs in this proposed process is the function of total remaining energy of each node as well as total average energy of the whole arrangement. The algorithm considers initial energy, optimum value of cluster heads to elect the next group of cluster heads for the network as well as residual energy. Total remaining energy of each node is compared to total average energy of the system and if the result is positive, these nodes are eligible to become CH in the very next round. Analysis and numerical simulations quantify the efficiency and Average Energy Ratio (AER) of the proposed system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.927-930
• /
• 2012

The sensor network technology for core technology of ubiquitous computing is in the spotlight recently, the research on ubiquitous sensor network is proceeding actively which is composed many different sensor node. One of the important condition for design of sensor node is to extend for network life which is to minimize power-consumption under the limited resources of sensor network. This study suggest routing protocol that was used second level cluster structure to reduce power-consumption of sensor node. the first level use the previous routing protocol under the LEACH, second level decide to transmit or not by comparision of data value for Effective Usage, reduce the unnecessary power-consumption.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.7
• /
• pp.537-548
• /
• 2014

In this paper, horn loudspeaker modeling was suggested, investigated and verified through comparison of test results and simulation ones based on input electrical impedance curves and acoustic sensitivity ones. First, Thiele Small parameters of horn driver were identified by using pseudo loudspeaker model concept and verified in case of both closed and open horndriver. Second, cone-shaped horn models were investigated and compared with input acoustic impedance curves for real horn(cone angle $6.6^{\circ}$) and short horn(cone angle $27.9^{\circ}$). It showed that Leach model for cone horn was well described to test results, which were electrical impedance and acoustic sensitivity, compared to Lemaitre one. To represent horn system model good approximation in wide frequency range, mass correction filter and lowpass filter were adopted and consequently showed good fitted to test results.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11b
• /
• pp.92-106
• /
• 2005

The head-end processes of spent TRISO fuel have been reviewed to understand the current status and the limitations of the reported processes. The main concerns in the TRISO treatment are to effectively breach and separate the carbon and SiC layers composing the TRISO particles. The crush-bum scheme which was considered in the early stages of the development has been replaced by the crush-leach or $CO_2$ burning and the succeeding CO decomposition process because of a sequestration problem of $CO_2$ containing $^{14}C$. However there are still many obstacles to overcome in the reported processes. Hence, innovative thermomechanical and pyrochemical concepts to breach the coating layers of the TRISO particle with a minimized amount of second waste are proposed in this paper and their principles are described in detail.

• Journal of Korean Society on Water Environment
• /
• v.20 no.5
• /
• pp.466-472
• /
• 2004

Red mud is formed as a waste during bauxite refining known as Bayer's process. Its main constituents are iron, aluminium, sodium and silica. The disposal of large quantities of wasted red mud causes a serious ecological problem. In this study, the red mud wasted from the bauxite refinery was studied for phosphate removal from aqueous solution according to activation methods. The influence of heat treatment, and neutralization with sea water and acid treatment level for the optimum conditions for phosphate removal have been determined. Heat treatment combined with acid treatment is most suitable for the removal of phosphate from aqueous solution. The optimal condition was activated with 1 N HCl solution after heating in $600^{\circ}C$ during 4 hours. Acid and heat treatment causes sodalite compounds which hinder the phosphate adsorption to leach out. The adsorption data obtained followed a first-order rate expression and fitted well with the Freundlich Isotherm well.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.90-101
• /
• 2004

The present trend of disposing treated sewage water by allowing it to infiltrate the soil brings a new dimension to environmental problems. It is therefore necessary to identify the chemicals likely to be present in treated sewage water. A soil column experiment was conducted to determine the behavior of chemical species in soil columns applied with secondary treated sewage water. To predict the behavior of chemical species, a multicomponent solute transport model that includes the biochemical redox process and cation exchange process was developed. The model computes changes in concentration over time caused by the processes of advection, dispersion, biochemical reactions and cation exchange reactions. The solute transport model was able to predict the behavior of the different chemical species. The model reproduced the sequential reduction reaction. To design the safe depth of plow layer where $NO_3^-$ is totally reduced, a numerical study of $NO_3^-$ leach was done and it was found out that the pore velocity and concentration of $CH_2O$ at the inject water was found to affect $NO_3^-$ reduction in the mobile pore water phase. It is revealed that the multicomponent solute transport model is useful to design the land treatment system for $NO_3^-$ removal from wastewater.