• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.845-851
• /
• 2008

Oxidative desulfurizaton of model sulfur compounds and Industrial diesel fuel(LCO; Light Cycle Oil) over Ti-grafted SBA-15 catalyst was studied in a batch reactor with tert-Butyl Hydroperoxide(TBHP) as oxidant. Effects of Ti loading, TBHP/Sulfur mole ratio, reaction temperature on ODS activity and kinetic parameters were investigated. Ti-grafted SBA-15 catalyst showed higher sulfur removal activity in the oxidative desulfurization reaction of refractory sulfur compounds(DBT and 4, 6-DMDBT) and LCO, suggesting that Ti-grafted SBA-15 catalyst could be a good candidate for ODS catalyst.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.560-563
• /
• 2006

LED is promising for the application of specialty illumination. Thiscolor management system, V-core, with LED light sources and the structure of V-core for LCoS projector has been proposed to improve the primary saturation, uniformity and contrast. We designed the high efficient LED modules for high brightness requirement. The LED module can operate in narrow-direction indicator, $12^{\circ}$.

• Journal of Surface Science and Engineering
• /
• v.29 no.6
• /
• pp.839-846
• /
• 1996

Epitaxial (La, Sr)$CoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$by pulsed laser deposition for ferroelectric field effect transistor. Epitaxial $LaCoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$ heterostructures exhibited 70$\mu C/cm^2$ and 17 $\mu C/cm^2$at a positively and negatively poled states, respectively. On the other hand, epitaxial (La, Sr)$CoO_3/Pb(Zr,\;Ti)O_3/LaCoO_3$heterostructures show the remnant polarization states opposite to the $LaCoO_3/Pb(Zr,\;Ti)O_3/(La,\;Sr)CoO_3$ heterostructures. This indicates that the interface between (La, Sr)$CoO_3$ (LSCO) and $Pb(Zr, Ti)O_3(PZT)$ layers affects the asymmetric polarization remanence through electrochemical nature. The resistivity of $LaCoO_3$ (LCO) layer was found to be dependent on an ambient oxygen, primarily the ambient oxygen pressure during deposition. The resistivity of the LCO layer varied in the range of 0.1-100 $\Omega$cm. It is suggested that, with an appropriate resistivity of the LCO layer, the LCO/PZT/LSCO heterostructure can be used as the ferroelectric field effect transistor.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.295-298
• /
• 2003

Reflective mode liquid crystal on silicon (LCoS) microdisplay is the major technology that can produce extremely high-resolution displays. A very large number of pixels can be packed onto the CMOS circuit with integrated drivers that can be projected to any size screen. Large size direct-view thin film transistor (TFT) LCDs becomes very difficult to make and to drive as the information content increases. However, the existing LC alignment technology for the LCoS cell fabrication is still the mechanical rubbing method, which is prone to have minor defects that are not visible normally but can be detrimental if projected to a large screen. In this paper, application of photo-alignment to LCoS fabrication is presented. The alignment is done by three-step exposure process. A MTN $90^{\circ}$ mode is chose as to evaluate the performance of this technique. The comparison with rubbing mode shows the performance of photo-alignment is comparable and even better in some aspect, such as sharper RVC curve and higher contrast ratio.

• Electrical & Electronic Materials
• /
• v.15 no.2
• /
• pp.28-35
• /
• 2002

• Journal of Korean Electronics
• /
• v.23 no.7
• /
• pp.22-27
• /
• 2003

• Broadcasting and Media Magazine
• /
• v.6 no.4
• /
• pp.44-56
• /
• 2001

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.158-159
• /
• 2002

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1398-1401
• /
• 2006

Silver paste curing process is very important in LCoS panel manufacture because incomplete curing process will cause poor bonding strength and increase resistance. The imperfection situation results in poor reliability and the variation of the common voltage, respectively. The change of the common voltage causes image flicker. According to Kinetics, we acquire activation energy by using dynamic DSC and compare two kinds of silver paste. From the result of isothermal DSC, we get optimum curing parameters to solve the flicker problem caused of incomplete curing of the silver paste.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.656-659
• /
• 2006

MD (DLP, LCoS) Projection TV is appropriate for large screen display with high definition at a relatively low price and thus, has been popular in the digital TV market. In order to realize high resolutions in the DLP projection TV, we successfully developed the Pixel Enhancement Actuator. Furthermore, it is also required that the contrast ratio of projected video signals onto a large screen should be improved. Therefore, we propose a contrast enhancer which adjusts the amount of projected lights by a dynamic aperture and a attached position sensor.