• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.9
• /
• pp.982-989
• /
• 2008

There is a noticeable hum from the inverter board of LCD TV when in operation. In this study, we investigate the source and the characteristics of this noise for the inverter board of LCD TV using measurement of vibration and noise. Modal analysis of vibration and noise is visualized for identification of noise sources and transmission vibration. The main source of noise was the transformer of the LCD TV inverter. A noise reduction was achieved by damping the structural elements.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.3
• /
• pp.80-85
• /
• 2010

In this paper, we present an algorithm for efficient control of backlight LED in order to reduce the power consumption of LCD TV. In addition, a pragmatic implementation method is presented. In conventional local dimming control, backlight LEDs of LCD TV are divided into $M{\times}N$ blocks. And, the proper luminance for each block is computed according to input image and used for dimming control. But, LED light of each block is diffused and affects the neighboring blocks, so that luminance of each block becomes larger than that of intent. In the proposed algorithm, dimming control values are reduced by the amount of quantity affected by the neighboring blocks using light spread function, resulting in additional reduction of power consumption.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.235-238
• /
• 2006

As the screen size of LCD TV increases, an external electrode fluorescent lamp (EEFL) has been suggested to be applicable as backlight source for LCD TV. Since the EEFL has non-linear characteristics, which makes the analysis and design complicated. In this paper, the characteristics of the EEFL are investigated and a full-bridge RLC series-resonant inverter is analyzed and designed for EEFL backlight of 32-inch LCD TV. Finally, the experimental results are shown to validate the analysis and design.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.649-652
• /
• 2009

본 논문에서는 LCD TV의 전력 소비를 절감하기 위해 백라이트 유닛을 다분할하여 디밍 제어를 수행하는 알고리즘을 제안한다. 최근 LED 백라이트 유닛을 채용한 대형 LCD TV가 출시됨에 따라서, 백라이트 유닛의 디밍 제어를 통해 LCD TV에서 전체 전력 소비를 절감하고자 하는 기술이 활발히 연구되어 왔다. 기존의 방식은 전체 화면을 MxN개의 분할로 나누어, 각 분할 영역마다 화면의 최대 밝기 정보를 추출하여 디밍 제어를 수행했지만, 본 논문에서는 각 분할영역마다 인접한 영역으로부터 간섭받는 빛의 양을 반영하여, 실제 디밍 제어 값을 다시 계산함으로써, 추가적인 전력 절감 효과를 얻을 수 있는 방식을 제안하고 성능 평가를 하였다.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.302-307
• /
• 2003

Demand of the LCD-TV is remarkably increasing with development of the LCD technology in these days. Thus, this research has analyzed thermal problems such as heat transfer characteristics inside and outside the LCD-TV using numerical simulation and experiments. The simulated results have been compared with the experimental results using an infrared (IR) camera and T-type thermocouples. The optimal design of structure has been proposed to improve the thermal efficiency of radiation from the comparison.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.1135-1138
• /
• 2003

A direct light type backlight for large-area LCD-TVs using External Electrode Fluorescent Lamps (EEFLs) has been developed. The brightness was $450cd/m^{2}$(nit) and the luminous uniformity (max/min) was 1.3. The mechanical design of backlight was optimized and the reliability of lamps was secured. As a result, the possibility of backlight with EEFLs for large area LCD-TVs was sufficiently proved.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.37-41
• /
• 2004

Parallel combination of cold chathode fluorescent lamps (CCFL) are widely used as the light sources of LCD TV backlight. Brightness uniformity is safisfied by using one transformer per one CCFL. Instead of using one transformer per oneCCFL, one transformer is used to drive 8 CCFLs by using differential driving method. A differential driving inverter with two transformers is developed to drive 16 CCFLs of 26' backlight for LCD TV. The brightness uniformity of $88\%$ was obtained by driving 26' backlight with the developed differential driving inverter successfully.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.39-42
• /
• 2007

Since the scalability of OLED process is crucial factor for large-sized TV manufacturing, various technologies are reviewed based on the published information. Despite of recent technology advancement enabling high color purity, large-sized AMOLED, a lot of problems to solve still exist to enter the large-sized display market. Here, Samsung will discuss what has to be concerned for large panel and how far the OLED technologies need to go more for the large-sized AMOLED TV marketplace.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.3
• /
• pp.8-13
• /
• 2010

For better picture quality in LCD TVs, it is important to reach a steady emitting state within as short a time as possible in the initial stage after the TV is turned on. The initial characteristics of LCD TVs are mainly determined by the properties of the backlight. In the present study, the photometric and spectroscopic properties of a 55-inch Cold Cathode Fluorescent Lamp (CCFL) and Light Emitting Diode (LED) backlights were investigated. The measured properties include time dependence of the spectrum, luminance, and color coordinates. The results show that the change in the spectroscopic properties of the LED backlight is smaller than that of the CCFL backlight. This indicates that the initial picture quality of the LCD TV with the LED backlight is superior to that with the CCFL backlight. The origins of this difference were discussed in relation to the inherent characteristics of the two light sources.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2279-2282
• /
• 2003

This paper is research to control method between wireless LCD TV and Set-Top-Box. Audio and Video signal control of wireless LCD TV through Set-Top-Box, usually two systems fairly be away, there is weakness that must go to set-top-box for operation. In this paper design and manufacture to solve this weakness.