• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.2
• /
• pp.55-61
• /
• 2013

A field-programmable gate array (FPGA) is an integrated circuit designed to be configured by a customer or a designer after manufacturing. The FPGA configuration is generally specified using a hardware description language (HDL), similar to that used for an application-specific integrated circuit (ASIC) (circuit diagrams were previously used to specify the configuration, as they were for ASICs, but this is increasingly rare). Contemporary FPGAs have large resources of logic gates and RAM blocks to implement complex digital computations. In this paper, we implement a system of digital instrumentation using FPGA. This system consists of the trigger part, memory address controller part, control FSM part, Encoder part, LCD controller part. The hardware implement using FPGA and the verification of the operation is done in a PC simulation. The proposed hardware was mapped into Cyclone III EP2C5Q208 from Altera and used 1,700(40%) of Logic Element (LE). The implemented circuit used 24,576-bit memory element with 6-bit input signal. The result from implementing in hardware (FPGA) could operate stably in 140MHz.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.6
• /
• pp.519-522
• /
• 2008

As industry of a semiconductor and LCD industry have been rapidly growing, precision technologies of machining such as etching and 3D measurement are required. Stylus has been important measuring method in traditional manufacturing process. However, its disadvantages are low measuring speed and damage possibility at contacting point. To overcome mentioned disadvantage, non-contacting measurement method is needed such as PMP(Phase Measuring Profilometry), WSI(white scanning interferometer) and Confocal Profilometry. Among above 3 well-known methods, WSI started to be applied to FPD(flat panel display) manufacturing process. Even though it overcomes 21t ambiguity of PMP method and can measure objects which has specular surface, the measuring speed and vibration coming from manufacturing machine are one of main issue to apply full automatic total inspection. In this study, We develop high speed WSI system and algorithm to reduce unknown noise. The developing WSI and algorithm are implemented to measure 3D surface of wafer. Experimental results revealed that the proposed system and algorithm are able to measure 3D surface profile of wafer with a good precision and high speed.

• Journal of the Speleological Society of Korea
• /
• no.79
• /
• pp.47-51
• /
• 2007

As time goes by, ultrasonic wave is getting important and new technology, which is adapted to ultrasonic wave is used to industry such as home appliance, automobile, and high-tech industry. Especially, ultrasonic wave is used an alarm device whether there are things at the rear of I. It's do important device in automobile system because it can prevent car-accident from inattention of the driver. Actually, there has already been lots of the alarm device. But it's expensive and so difficult to set the device. So almost driver don't set device at their automobile. We focus on these problems. We want to make cheap md easy setting device. Ultrasonic wave sensor emits Ultrasonic-signal at outgoing part and receive part accept the signal. Sensor analyzes the signal and Distance is displayed on LCD of device. The device makes alarm if distance is near from something of rear. The device makes break-system operate to prevent drivers from crashing if distance is so near. This device is portable. So normal deriver can set it easily.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.17-24
• /
• 2024

Recently, retail technology has been developed by the rapid evolution of e-commerce and a representative example is ESL technology. In this study, we investigate ESL technology, market status and forecasts, and analyze the competitive structure between relational companies. Market analysis refers to data from market reports of Marketsandmarkets and Research, and internet media. In ESL, the display field is predicted to account for 43% of the total market in 2026, and is converting from LCD to electronic paper. The segmented type is becoming more advanced into the full-graphic type, and CAGR of 18.7% for 3-7 inches and 20.6% for 7-10 inches is predicted. The demand for ESL is greatest in North America and Europe, but CAGR is the highest in the Asia-Pacific region at 19.1%. Since ESL technology has a lot of overlap with semiconductor and display technology, the Asia-Pacific region is relatively advantageous, and this has led to rapid growth of domestic companies. However, it is expected that competition from European companies that are actually owned by Chinese companies will increase in the future, so continuous technological development and new market development are necessary.

• Design & Manufacturing
• /
• v.14 no.2
• /
• pp.21-27
• /
• 2020

Recently, LCD (Liquid Crystal Display) has been replaced by OLDE (Organic Light Emitting Diode) in high resolution display industry. In the process of OLDE production, it inspects defective products by sending a signal using a probe during OLED panel inspection. At this time, the cause of the detection of failure is divided into two. One is the self-defect of the OLED panel and the other is the poor contact occurring in the process of contact between the two. The second case is unknown at the time of testing, which increases the time for retesting. To this end, we made a system that can identify in real time whether the probe is in contact during the inspection. A contact probe unit was designed for the system, and a stage system was implemented. An inspection system was constructed through S / W and circuit configuration for actual inspection. Finally, a system that can check contact and non-contact in real time was constructed.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1062-1065
• /
• 2004

The importance of display is becoming increasingly important due to the development of information and industry where it leads to diverse and abundant information in today's society. The demand and application range for FPD(Flat Panel Display), specifically represented by LCD(Liquid Crystal Display) and PDP(Plasma Display Panel), have been rapidly growing for its outstanding performance and convenience amongst many other forms of display. The current focus has been on OLED(Organic Light Emitting Diode) in the mobile form, which has just entered into mass production amid the different types of FPD. Many studies are being conducted in regards to device, vacuum evaporation, encapsulation, and drive circuits with the development of device as a matter of the utmost concern. This study develops a new type of light-emitting materials by synthesizing medical polymer organic chitosan and phosphor material CuS. Chitosan itself satisfies the Pool-Frenkel Effect, an I-V specific curve, with a thin film under $20{mu}m$, and demonstrates production possibility for a living body sensors solely with the thin film. Furthermore, it enables production possibility for EML of organic EL device(Emitting Layer) with liquid Green light emitting and Blue light emitting as a result of synthesis with phosphor material.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.1
• /
• pp.33-41
• /
• 2011

Due to the recent quantum leaps forward in bio-, nano-, and information-technologies (BT, NT and IT), the precisionization and miniaturization of mechanical and electrical components are in high demand. In particular, the ITrelated equipments that take a great part in our domestic industry are in the area requiring high precision technologies. As a consequence, the researches on the development vibration isolation systems that diminish external disturbance or internal vibration are highly required. Among the components comprising the vibration isolation system, air spring has become on a focal point for the researchers due to its merits. This air spring is able to support heavy loads, keep a low natural frequency despite of having a lower value of stiffness, and control the performance of vibration isolation. However, sometimes the sole use of air spring is in demand due to some economic reasons. Under this circumstance, the damping effect of sole air spring may not enough to reduce sufficient amount of vibration. In this study, the air spring mount system connecting with an external chamber is proposed to increase or control the damping effect. To investigate its damping mechanism, the thermal and dynamic behaviors of the system is examined through a theoretical modeling approach in this part of research. In this approach, thermomechanical and Helmholtz resonator type models are to be employed for the air spring/external chambers and connecting tube system, respectively. The frequency response functions (FRFs) derived from the modeling effort are evaluated with physical parametric values and the effects of connecting tube length on these FRFs are identified through computer simulations.

• Korean Security Journal
• /
• no.29
• /
• pp.7-34
• /
• 2011

Achieving high-level technology in fields such as IT-related industry, semiconductors, mobile phones, LCD, automobile, shipbuilding, etc., Korea has become an international market leader in those fields. In results, there are the increasing numbers of technology leakage attempts in various manners. Recently, technology leakages are not limited to illegal industrial espionage, but also occur during usual corporate proceedings such as technology transfer, joint research and M&A. In fact, there was a technology leakage issue in the M&A between Ssangyong Motors of Korea and Shanghai Motors of China. Current M&A regulations of Korea are not independent laws, but are spread over various laws, such as commercial law, Capital Markets and the Financial Investment Services Act, Foreign Trade Act, etc. This paper focuses on whether the current Korean regulations regarding M&A are able to effectively restrict the leakage of major information of corporate during M&A and seeks the complements.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.2
• /
• pp.109-115
• /
• 2023

In this paper, we demonstrated the orientation characteristics of liquid crystals using UV-treated FSAM as alignment layer. Moreover we confirmed the FSAM properties before and after UV treatment on indium tin oxide (ITO) glass substrates using physicochemical analysis. The hydrophobic property of the FSAM surface is change to hydrophilic through UV treatment. After UV treatment the LC molecules also were uniformly and horizontally aligned on the FSAM surfaces and the pretilt angle was obviously changed 90° degrees to 0° degrees. EO characteristic of TN cell which was fabricated with UV-treated FSAM was faster response time compare to conventional PI layer. The FSAM before and after UV treatment has a superior application potential as the LC alignment layer for LCD, potentially replacing the conventional polyimide layer.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.1
• /
• pp.205-238
• /
• 2017

Display industry in Korea has been rapidly developing over 20 years, now taking the top-class leading position in the world. Nevertheless, many previous studies have mainly focused on major panel set makers. To overcome the drawbacks, this study focuses on supplier companies in the upstream of display industry such as materials, components, and equipments sectors. The research method used in this study is an industry value chain perspective combined with architectural innovation approach. Display panel is produced through fabrication process and modular process, each having a different characteristics of process architecture. This research figured out that there are quite a different development characteristics between materials and components suppliers and equipment suppliers. The number and revenue of materials and components suppliers were quite larger than equipments suppliers. However, the former has been growing mainly in the field of modular process, having a very weak position in the field of fabrication process. On the contrary, equipments suppliers have been showing a continuously growing pattern in the field of fabrication process. The R&D expenditures between these two kinds of suppliers showed a similar pattern. The fabrication process of display panel production is characterized as a highly integral architecture characteristics, so as to be a strong barriers to local suppliers, resulting less development of materials and components suppliers in Korea.