• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.249-250
• /
• 2006

Recently FPD(Flat Panel Display) is used in various field to display enormous information. So cutting technique of flat panel display is needed for producing variety display merchandises. In present, cutting methods of flat panel glass includes breaking process. But this process occurs many glass particles. This glass particles are directly related badness of merchandise and falling productivity. In this paper, to cut front substrate glass of LCD and to get optimized cutting condition are tried fur eliminating breaking process with developed glass cutting machine using a Piezoelectric ceramics actuator. It is known that the vibration of Piezoelectric Ceramic have effect in crack proceeding through the analysis of fracture section.

• 대한기계학회논문집A
• /
• 제32권5호
• /
• pp.451-457
• /
• 2008

Flat Panel Display(FPD) is widely used a video display terminals to consumer products of LCD and PDP. The contamination and damage were affected by using the previous contact conveyor's method. In this paper, it analyzes the FPD deflection to develop the non-contact FPD transfer process using lift force. Each conveyor's equipment is called a horizontal conveyor, vertical conveyor and robot pick-up equipment. As result of an analysis of FPD panel's deflection, a robot pick-up equipment has performed according to under the present conditions like panel's weight and loaded glass to move FPD panel from one place to other places properly. Results of the analysis showed 0.474 mm, 0.424 mm and 1.237 mm. Those values are lower than a predicted optimum values : 2 mm for both horizontal and vertical conveyers; 5 mm for robot pick-up equipment. Therefore, those results verify each equipment have safety and reliability.

• 한국재료학회지
• /
• 제18권5호
• /
• pp.247-252
• /
• 2008

A laser glass cutting system using a femto-second laser was evaluated for Flat Panel Display (FPD) glass. A theoretical analysis of the ablation threshold and depth is described using an explicit analytic form. Experiments for clean and deep grooves were performed using a 3W femto-second laser, and the relationships between the input energy and the scribing depth as well as the threshold energy are presented. Mechanical breaking after the scribing process was carried out and the results are compared with a theoretical method. It was found that a two-sided LCD panel glass can be cut clearly using the laser cutting method. The methodology was found to be very effective as a mass-production cutting system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.300-301
• /
• 2006

We studied about new module technology to solve warpage problems that produce bending of cell in the LCD (Liquid crystal display). Characteristics of cell gap and glass bending of applying heat Panel's PAD part and cell at various temperature was investigated. When applies heat and compresses PAD party only in case of compressing COG(Chip on Glass), uniformity of cell gap that happen by glass bending by temperature of these compressing COG In the PAD party is decreased. However, in case of compress COG. glass bending of applying heat Panel's PAD part and cell at various temperature produced 20um. But, uniformity of cell gap was not decreased. Therefore, it is considered that applying heat Panel's PAD part and cell could decrease uniformity of cell gap and bending of glass.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.281-285
• /
• 2006

Recently LG.Philips LCD (hereafter "LPL") has announced the development of the world's largest 100-inch TFT-LCD with Advanced Super IPS technology. This magnificent LCD achieves the feature of a full high definition resolution $1920{\times}1080(16:9)$, 600nit brightness, 3000:1 dynamic contrast ratio, 92% color gamut, 180 degree viewing angle, and 5msec response time at all grays, targeted for HDTV and public display applications. Some unique technologies such as Cu bus line, advanced wide view polarizer, and high color gamut lamp were applied. A new stitching free technology was developed to overcome the size limitation of photo mask in both the TFT and CF processes. The size of the panel (100-inch) based on the wide format (16:9) is determined by the maximum efficiency of world's $1^{st}$ seventh generation line (glass size:$1950{\times}2250mm$) in LPL's Paju display cluster. In this paper, we will discuss the issues of 100-inch TFT-LCD.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.231-236
• /
• 2004

The area of flat glass panel displays such as LCD (Liquid crystal display) and PDP (Plasma display panel) has been increased more than 2 $\times$ 2 m$^2$ for productivity improvement. However, such a large panel area incurs large panel deflection during panel transfer using robots or AGV (Automated guided vehicle) systems. Therefore, electronic industries are making an effort to find an alternative transfer system for the large glass panels with small deflection. The air conveyor with porous pads is one plausible solution, but it becomes expensive because the large porous pads cost much and air consumption increases as the panel area increases. In this work, a simple air slit levitating conveyor was devised to lower the equipment cost and to reduce the air consumption of system. The air flow model between the LCD glass panel and conveyor was constructed and its validity was verified by experiments. To minimize the air consumption, the conveyor dimensions were optimized, and the air consumptions between the air conveyors with the air slit and that with the porous pad were compared.

• 반도체디스플레이기술학회지
• /
• 제6권1호
• /
• pp.59-64
• /
• 2007

Non-contact transportation of a large-sized glass plate using air cushion for the vertical sputtering system of liquid crystal display (LCD) panel was considered. The objective of the study was to design an air pad unit which was composed of multiple injection and exhaust holes and mass flow supplying pipe. The gas was injected through multiple small holes to maintain the force for levitating glass plate. After hitting the plate, the air was vented through exhaust holes. Complex flow field and resulting pressure distribution on the glass surface were numerically studied to design the air injection pad. The exhaust hole size was varied to obtain evenly distributed pressure distribution at fixed diameter of the injection hole. Considering the force for levitating glass plate, the diameter of the exhaust hole of 30 to 40 times of the gas injection hole was recommended.

• 한국컴퓨터정보학회논문지
• /
• 제12권4호
• /
• pp.249-256
• /
• 2007

본 논문에서는 휴대 가능한 중소형($4{\sim}9$인치 크기)의 정보단말기에 사용되는 TFT-LCD(Thin Film Transistor addressed -Liquid Crystal Display)의 LDI(LCD Driver Interface) 제어기(controller)를 제조사와 크기에 관계없이 사용할 수 있는 표준화된 범용 TFT-LCD의 LDI를 설계하고 FPGA(Field Programmable Gate Array)로 구현하였다. 설계한 LDI 제어기는 FPGA 테스트 보드(test board)에서 검증하였으며, 상업용 TFT-LCD 패널에서 시험결과 안정적으로 상호 동작하였다. 설계한 범용 LDI 제어기의 장점은 LCD의 제조사와 크기에 관계없이 그 동작을 표준화시켜 설계하였으므로 향후 모든 패널내의 SoG(System on a Glass) 모듈 설계에 적용할 수 있는 것이다. 그리고 기존의 방식에서는 LCD 제조사별, 패널 크기별로 별개의 LDI 제어기 칩을 개발하여 사용하지만, 설계한 LDI 제어기는 모든 휴대 가능한 중소형 패널을 구동시킬 수 있어서 IC의 공급가, AV 보드와 패널의 제조 원가 하락을 가져올 수 있으며 가까운 장래에는 보다 우수한 기능의 패널을 제작하기 위한 TFT-LCD 패널 모듈의 SoG 개발이 필연적으로 요구되고 있다. 연구결과는 TFT-LCD 패널을 더욱 소형화, 경량화 그리고 저가격화가 가능하여 기술 및 시장 경쟁력을 선점할 수 있다. 또한 향후 많은 수요가 예상되는 이동형 정보단말기에 사용되는 TFT-LCD 패널 모듈의 SoG IC(Integrated Circuit) 개발과 제작을 위한 기초 자료로서 활용될 수 있다.

• 산업기술연구
• /
• 제24권B호
• /
• pp.73-81
• /
• 2004

The development of efficient and precise handling of an liquid crystal display (LCD) panel has been addressed as the sizes of LCD panels become much larger than ever. The majority part of LCD panel handling is conducted by industrial robots for the cost reduction and the quality control. A challenging problem, vibration of the panel, can be found when the robots are utilized for handling LCD panels. The vibration causes the poor product precision and the low productivity. The characteristics of LCD panels, which are the high size-to thickness ratio, the high elasticity, and the high brittleness, are the major sources of the vibration This paper introduces the vibration attenuation techniques to overcome the difficulties encountered in the LCD production using the industrial robots.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.317-317
• /
• 2006

This study is about Sealant for LCD panel which used m manufacture of liquid crystal display device with LC dropping method, with the least contamination of liquid crystals, the best adhesion of glass and Improvement of photoreaction for shaded area.