• 전자공학회논문지S
• /
• 제35S권9호
• /
• pp.70-77
• /
• 1998

3판식 액정 프로젝션 시스템에서 색분리/합성용으로 사용되는 다이크로믹 미러의 새로운 설계 방법을 제안한다. 색재현 성능의 기준으로 단순히 밝거나 색순도에 근거한 방법이 아닌, 3차원 균등색공간에서의 색영역의 체적을 최대화 시키도록 설게 변수를 최적화한다. 제안된 설계 방법에서는 액정 프로젝션 시스템의 색재현의 색채학적 분석을 통해, 2개의 대표적 시청 조건에서 CIELUV 균등색공간의 재현 가능한 색영역의 체적을 최대화하도록 Dichroic Mirror/Filter의 경계 파장의 최적치가 구해진다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.273-273
• /
• 2006

Over the past years, a large number of acrylate polymers have been developed and the overcoat thin layer containing acrylate polymers have been used for TFT-LCD color filter. As forming thin layer using acrylate polymers, the existing acrylate polymers have some problems such as low hardness by low Tg temperature, coating uniformity and solubility in organic solvent. To solve these problems, we synthesized new polymer(Scheme.), containing olefin monomer, which has high Tg temperature, good coating uniformity and good solubility in organic solvent. The overcoat thin layer containing new polymer resulted in good coating uniformity, stain, spot, scratch, heat resistance, DOP(Degree Of Planarization) on RGB glass, transparency, hardness, adhesion, anti-chemicals(anti-acid, anti-base, anti-organic solvent), insulation and anti-humidity. Scheme. The structure of new polymer X = Olefin monomer contains ketone, ester, hydroxy, ether, halogen, nitrile, alkoxy, phenyl functional group $R_1$ and $R_2$= H or $CH_3$. Ratio=0<[1/(1+m+n)]<0.7,0.1[$\leq$[n/(1+m+n)]<0.5.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1290-1294
• /
• 2004

Exposure System is used for printing a prescribed pattern on a printed board, a liquid crystal substrate or the like. In this paper we are trying to develop projection Optics Exposure System for manufacturing Color Filter of LCD Display. This paper explain the Projection Optics Design and Illumination Optics Design of Color Filter Exposure system.

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.24-31
• /
• 2010

Laser carbonization of a polymer layer can be employed in various applications in the microelectronics industry, e.g repairing brightness pixels of an LCD panel. In this work, the process of thermal degradation of LCD color filter polymer by various laser sources with pulsewidths from CW to fs is studied. LCD pixels are irradiated by the lasers and the threshold irradiance of LCD color filter polymer carbonization is experimentally measured. In the numerical analysis, the transient temperature distribution is calculated and the number density of carbonization in the polymer layer is also estimated. It is shown that all the lasers can carbonize the polymer layers if the output power is adjusted to meet the thermal conditions for polymerization and that pulsed lasers can result in more uniform distribution of temperature and carbonization than the CW laser.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.637-640
• /
• 1999

In this Paper we show the LCD simulator for defect inspection using image processing algorithm and neural network. The defect inspection algorithm of the LCD consists of preprocessing, feature extraction and defect classification. Preprocess removes noise from LCD image, using morphology operator and neural network is used for the defect classification. Sample images with scratch, pinhole, and spot from real LCD color filter image are used. The proposed algorithms show that defect detected and classified in the ratio of 92.3% and 94.6 respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제8권5호
• /
• pp.215-217
• /
• 2007

Recently, color reproduction properties have attracted lots of attention with mass production of LCD especially corresponding to TV application and achievement of color reproduction properties such as CRT have been considered one of technical goals for high quality display. However, revision of the color reproduction properties only with CF(color filter) have fundamental limitations and resultant decrease in the transmittance of panel causes demand on high brightness of BL(Back Light). In this paper, we present such a method in which by optimization of original light spectrum from the BL source will improves the color reproduction properties corresponding to them of the CRT. When the intensity of RED and Green-Blue from ramp is revised densely, the characteristics different from CCFL(Cold Cathode Fluorescent Lamp) used before become added so that about 11 % of the color reproduction properties is improved compare to the existing LCD panel.

• Journal of Information Display
• /
• 제11권2호
• /
• pp.45-48
• /
• 2010

A direct-lit liquid crystal display that does not use color filters is proposed. A backlight unit that employs compartmentalized RGB LED and lenticular-lens arrays is used instead of color filters to direct the RGB LED lights into the RGB subpixels. The color-filterless LED backlight design, simulation, and experiment results are presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.76-78
• /
• 2009

A liquid crystal display that does not use color filters is proposed. A backlight unit that employs compartmentalized RGB LED arrays and a lenticular lens array is used instead of the color filters in order to direct RGB LED lights into the RGB subpixels. A design of color-filterless LED backlight and experimental results are presented.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.311-314
• /
• 2003

Holographic diffuser(HD) layer was demonstrated to be located inside LC cell for a transmissive LCD of TFT-array on Color Filter structure. Master pattern of this layer was generated by holographic method and this pattern was replicated by the stamping of the master pattern on UV resin. Combined with a compensation film, TN-mode LCD with this layer showed improved viewing angle characteristics, especially along the up-down direction.

• 한국광학회지
• /
• 제18권1호
• /
• pp.1-7
• /
• 2007

필터와 검출기로 구성된 필터식 색채계의 분광감응도는 국제조명위원회(Commission Internationale de I'Eclairage, CIE)에서 정의한 등색함수와 일치해야 한다. 본 연구에서는 정확도가 높은 색채계에 적용할 수 있는 등색함수 $\bar{x},\;\bar{y}\;\bar{z}$에 대한 필터를 상용화된 색필터를 조합하여 제작할 수 있도록 설계하였다. 특히 등색함수 $\bar{x}$는 두 개의 투과대역을 가지고 있기 때문에 파장 영역이 다른 2 개의 필터로 분리하여 실현하였다. 설계에는 색필터의 두께를 곡선 맞춤변수로 두고 비선형 최소제곱법으로 필터의 품질지수 $f{_1}'$ 값을 최적화하는 프로그램을 개발하여 사용하였다. 그 결과 모든 필터의 $f{_1}'$ 값이 3 % 이하가 되도록 설계할 수 있었으며, $\bar{y}$ 등색함수 필터를 실제로 제작하여 $f{_1}'$ 측정값이 2.8 %임을 검증하였다. 또한 설계한 등색함수 필터로 색채계를 제작하여 LCD 평판 디스플레이의 색채 측정에 사용할 경우 발생하는 계통오차도 산출하였다.