• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.847-850
• /
• 2008

Three thermally stable red dyes of azo, quinacridone and perylene derivatives were synthesized and dye-based color filters were manufactured for liquid crystal display. Aggregation behavior of the dyes and their spectral property in film state were investigated by concentration dependent spectroscopy and field emission scanning electron microscopy (FE-SEM). These dyes have remarkable difference on their aggregation behavior in film state. Such difference of aggregation behavior affects the spectral property of the film, and it can cause decreasing the transmittance of dye-based color filters.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.483-484
• /
• 2005

The field sequential liquid crystal display (FSLCD) does not need a color filter so that it is suitable for high resolution display. However, FSLCD has a drawback which requires a fast response time of sub-5 ms. We have studied the FSLCD with electrically controlled birefringence (ECB) mode. The ECB mode exhibits fast response time, high transmittance, low operating voltage and adequate viewing angle with a help of optical compensation films. In this paper, we present electro-optic characteristics of the ECB mode using a discotic film.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.792-797
• /
• 2018

We have explained the synthesis of novel phenanthrene and pyrene substituted phthalocyanines (PC-PHE and PC-PYR) and fully confirmed the structures by its spectral, photo physical and elemental analysis. For these phthalocyanines we checked the UV-Visible absorbance in PGMEA and chloroform and transmittance checked in PGMEA. The transmittance results suggested that these phthalocyanines are showing more than 90% transmittance at the 450-550 nm region. These synthesized molecules are nicely soluble in almost all industrial solvents. We checked the aggregation property of these phthalocyanines in PGMEA, and the results suggested no any aggregation for these molecules in PGMEA. The thermogravimetric analysis results concluded that PC-PHE and PC-PYR had high thermal stability. All studies explain that these new phthalocyanines are more suitable for LCD green color filter application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.269-270
• /
• 2009

The biased vertical alignment (BVA) liquid crystal (LC) mode shows a has a distinct advantage of lower manufacture cost due to the elimination of a lithographic process step to form either ITO-patterning or protrusions on the color-filter substrates. However, those devices have complex voltage conditions which is the respective induce voltage on common electrode, pixel electrode and bias electrode when positive and negative frame. In order to overcome the complex voltage condition, the pretilt angles is controlled by photo polymerization of the UV-curable reactive mesogen (RM). According to our studies, voltages to the cell are critical to achieve an optimized surface-modified quality BVA (Q-BVA) mode which provides the well defined reorientation of the LCs with respect to an electric field.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1112-1115
• /
• 2008

A very high current efficiency of 28 cd/A for three-mode microcavity tandem WOLED was successfully demonstrated. The 101 % of NTSCu'v' ratio of this white OLED with LCD color filter was achieved. In addition to wide color gamut, the highest delta (u'v') of respective RGB colors among the viewing angles 0 and 60 degree is just 0.042 and that of white color is less than 0.02.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.226-232
• /
• 2002

We searched thermal stability of ${\alpha}-Fe_2O_3$ using red color filter for display. In the PDP(Plasma Display Panel), the color filter layer is lied normally between front glass and transparent dielectric materials, so it might be needed to study the reaction of ${\alpha}-Fe_2O_3$ and transparent dielectric materials. The transparent dielectric materials containing ZnO has good transparency. Red colorlayer of ${\alpha}-Fe_2O_3$ contacted with dielectric material layer containing ZnO is changed to colorlessness over 500$^{\circ}$C because ZnO defuse ${\alpha}-Fe_2O_3$, the dielectric materials without ZnO, however, maintain red color at the same condition. We suggest that a layer contacting with ${\alpha}-Fe_2O_3$ red color layer has to lie with transparent dielectric materials without ZnO, then the materials containing ZnO is coated over to get color of ${\alpha}-Fe_2O_3$ for red color filter

• Analytical Science and Technology
• /
• v.12 no.5
• /
• pp.415-420
• /
• 1999

We estimated the quantity of the scum remaining on the Black Matrix (BM) surface of color filter. To do this, histogram was analyzed which was obtained from AFM image of the BM surface. We divided the histogram to two Gaussian functions of the free BM surface (1) and the scum (2), and calculated the areas ($a_1$, $a_2$) of both the Gaussian functions. We quantified the residue as the ratio of the area ($a_2/(a_1+a_2)$). As a result of the Gaussian functions of the free BM surface, it was revealed that another kind of residue remained on the BM surface. It was difficult to quantify it. but it could relatively be estimated from the average height and the standard deviation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.922-925
• /
• 2005

Inkjet printing technology is a highly proprietary process. We have evaluated the possibility of using inkjet technique to prepare color filters. Product specification for TV application was used as a template to examine process capability. Technical aspects of ink composition, jetting ability, and surface interaction were discussed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.4
• /
• pp.207-213
• /
• 2006

This paper presents the design and implementation of a video processor for the device of need TV-OUT function. The designed video processor satisfies the standard conditions of ITU-R(International Telecommunication Union-Radiocommunication) BT.470. Also, in order to apply various digital device, we concentrate upon hardware complexity. ITU-R BT.470 can be classified as NTSC, PAL or SECAM. NTSC and PAL use QAM(Quardarature Amplitude Modulation) to transmit color difference signals and SECAM uses FM(Frequency Modulation). FM must have antic-cloche filter but filter recommended by ITU-R BT.470 is not easy to design due to sharpness of the frequency response. So this paper proposes that the special quality of anti-cloche filter is transformed easy to design and the modulation method is modified to be identical with the result required at standard. The processor can control power consumption by output mode to apply portable digital devices. The proposed processor is experimentally demonstrated with ALTERA FPGA APEX20KE EP20K1000EBC652-3 device and SAMSUNG LCD-TV.

• Textile Coloration and Finishing
• /
• v.28 no.2
• /
• pp.57-62
• /
• 2016

We have synthesized five novel phthaloperinone dyes via a condensation reaction to be applied as yellow colorants for liquid crystal display(LCD) color filters. The reaction between 1,8-naphthalic anhydride(1a), 4-chloro-1,8-naphthalic anhydride(1b), 4-bromo-1,8-naphthalic anhydride(1c), 3-nitro-1,8-naphthalic anhydride(1d), 4-nitro-1,8-naphthalic anhydride(1e) and 1,2-diaminoanthraquinone(2) proceeded readily giving a product in 72-88% yields. The synthesized dyes were characterized by UV-Vis, mass spectrometry and elemental analysis. The spectral properties and thermal stability of the dyes were examined. The dyes absorb at around 400-450nm. All five dyes showed satisfactory thermal stability: the dyes retain 99-100% of its original weight at $300^{\circ}C$, 98-100% at $350^{\circ}C$, 92-98% at $400^{\circ}C$, and 84-92% at $450^{\circ}C$. We have quantitatively evaluated the reaction mechanism and reactivity of dye molecules by means of Pariser-Parr-Pople Molecular Orbital Method(PPP-MO).