• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.5
• /
• pp.451-457
• /
• 2008

Flat Panel Display(FPD) is widely used a video display terminals to consumer products of LCD and PDP. The contamination and damage were affected by using the previous contact conveyor's method. In this paper, it analyzes the FPD deflection to develop the non-contact FPD transfer process using lift force. Each conveyor's equipment is called a horizontal conveyor, vertical conveyor and robot pick-up equipment. As result of an analysis of FPD panel's deflection, a robot pick-up equipment has performed according to under the present conditions like panel's weight and loaded glass to move FPD panel from one place to other places properly. Results of the analysis showed 0.474 mm, 0.424 mm and 1.237 mm. Those values are lower than a predicted optimum values : 2 mm for both horizontal and vertical conveyers; 5 mm for robot pick-up equipment. Therefore, those results verify each equipment have safety and reliability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.441-442
• /
• 2007

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.15-20
• /
• 2011

The lithography system installed inside precision industry's (e.g. TFT-LCD) production factories are increasing in size, thereby increasing its dynamic load along with it. Such condition causes vibration within the area where the system is installed, which then negatively affects the production line to produce defective products. To prevent this type of situation, the facilities should adopt dynamic design that considers the lithography system's dynamic load. This study predicts the maximum value allowed for dynamic stiffness (which is a ratio of vibration response against a single unit of the dynamic load) of the lithography system and explains the result of its application on actual structures inside the facilities.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1590-1592
• /
• 2009

The ubiquitous nature of large area TFT-LCD televisions are truly one of the major success stories of consumer electronic products for the $21^{st}$ century. It is the industry's ability to lower prices over the years that have made TFT-LCD television an affordable option for the majority of consumers. TFT-LCD equipment manufacturers have played a major role these cost reduction efforts. Increasing requirements for high process quality like for eg UHD panels need to be met simultaneously with the demand of an highly productive and reliable equipment. AKT provides an excellent PVD product by improving performance and cost of ownership (CoO) for Gen8.5 and beyond.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2004.05a
• /
• pp.249-252
• /
• 2004

냉음극관(CCFL) 램프를 이용한 멀티램프 구동용 인버터를 제작 한 후 이를 이용하여 휘도 $20,000 cd/\textrm{m}^2$, 휘도 균일도 85%의 장비용 백라이트를 제작하였다. 이러한 고휘도, 높은 휘도 균일도의 직하방식 백라이트를 이용하여 기존의 형광등을 이용한 검사장비 보다 고휘도, 박형의 장수명 백라이트를 제작하였다.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.125-133
• /
• 2007

Everyone knows how much the company business goal is achieved is the most important to all companies. In order to maximize the business performance, many companies have introduced a diversity of management innovation activities. The effect of business performance is important in the business activity, but an efficiency of output-to-input concept is significantly important. Each year, companies have managed the business through a sum of performance. In terms of the efficiency of business performance, the management is importantly managed. In the efficiency of business performance, there are the main items including the total assets, employees, and operating expenses as the input. As the output, there are the main items of sales, current term's net income. This study is intended to calculate the business efficiency through DEA analysis for companies' business performance, and to study in order for the efficiency of business performance to be considered when the companies establish the mid and long term business plan.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3146-3151
• /
• 2012

For using them as a optical source of inspections equipment for LCD panel, the design ofexcellent backlight system, brightness uniformity and high power and good protection against heat is essential.In this paper, backlight system which is built in the 45 inch side emitting LCD backlight by LED arraystructure and driving circuit were designed and developed. After that, their performances were measured. Itshowed the luminance from 3,000 to 25,000[$cd/m^2$], the mean value x:0.3144, y:0.3076 of x-y chromaticity,dimming range of 27~515[$cd/m^2$], free flicker noise in the 80kHz and black level of 0.7~0.1[$cd/m^2$], thermaltest of cooling system in 20,000[$cd/m^2$] over values.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.7-10
• /
• 2007

In an effort to reduce weaknesses of existing laser displacement sensor-based system, a sensing device for distance and balance of mask-substrate gap using touch-type displacement sensor was suggested. The device suggested in this study is expected to solve the problems of prices and reflections, by means of a touch-type sensor. LCD exposure equipment stage system including suggested sensing device was realized to assess the characteristics of sensing the balance and gap between mask and substrate. It was verified that a touch-type displacement sensor-based device to adjust the balance and distance of mask-substrate gap suggested in this study can be applicable to LCD expose equipment in practice.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.72-75
• /
• 2007

본 연구는 TFT-LCD 부품인 Back Light Unit의 광원 역할을 하는 CCFL Assembly 공정을 분석하여 최적의 공정원 배치를 할 수 있도록 하였다. 이에 각 공정의 특성을 파악하고, 이를 Herrmann의 두뇌우성을 적용하여 공정원 배치를 하도록 하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1278-1284
• /
• 2010

In this paper, we propose a new mura detection algorithm for TFT-LCD effectively, which is based on multi-point, 2-dimensional FFT. Since mura in TFT-LCD has a certain area shape, it is seen as a sin wave in a LCD line. Since shapes of mura can be seen a circle, horizontal oval, or vertical oval, it is shown that they can be detected by 2-dimensional FFT easily. Through simulation for test image, it is shown that proposed algorithm can detect various sizes of mura. The proposed algorithm can be utilized in automatic test equipment for effective TFT-LCD mura detection.