• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.166-168
• /
• 2007

본 논문은 LCD backlight 인버터의 Cold Cathode Fluorescent Lamp(CCFL)를 구동하기 위해 승압 기능과 전류 평형 효과를 동시에 갖는 트랜스포머에서 부피 및 원가 저감 효과를 갖는 새로운 구조의 트랜스포머를 제안하였다. 제안된 트랜스포머의 타당성을 검증하기 위해 실제 40인치 LCD backlight 인버터에 적용하여 실험을 수행하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1507-1509
• /
• 2005

LCD(Liquid Crystal Display) products is needed to have high reliability and are produced without harmful material. Because Substitution for CCFL of Light source used to Conventional backlight unit, research is going about product with LED of light source at present. In this experiment, We made the LED backlight unit with high quality for automotivenavigation. This backlight unit has center luminance of 6500 nit at15W power consumption. We adjusted chromaticity by using ten Blue LED and eight side emitting type White LEDs with high power LED from Lumileds company.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.2
• /
• pp.69-81
• /
• 2010

A Cold Cathode Fluorescent Lamp(CCFL) is used as a LCD Monitor's backlight widely. The most common way to check CCFL's defects is an examination with the naked eye. This naked eye examination can cause an examination inconsistency and an industrial disaster. To examine CCFL defects, a shooting equipment and a defect detection algorithm are necessary. This paper shows the shooting environments for checking CCFL and presents some CCFL defect detection algorithms. As a result of experiments, our implementations showed 98.32% of successful defect detection of CCFL.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.8-14
• /
• 2009

A lamp which is currently employed to LCD(Liquid Crystal Display) Backlight is almost CCFL(Cold Cathod Fluorescent Lamp) and EEFL(External Electrode Fluorescent Lamp). However, the use of these lamps is being restricted as RoHS(the Restriction of the use of certain Hazardous Substances in electrical and electronic equipment) regulation is gradually reinforced. According to this situation, the manufacturing of a lamp which doesn't use mercury is unescapable. Moreover, LCD TV has a defect which take place Motion Blur phenomenon due to response time of LC(Liquid Crystal), and Hold-type characteristic which only exists in LCD differently to CRT, PDP. In this paper, an inverter is proposed to drive a plane light source lamp which is not containing mercury. Driving circuit of proposed inverter is simple because the number of semiconductor device and magnetic device is reduced by using forward topology. Also, Motion Blur phenomenon is decreased by dividing the plane light source lamp to six block along vertical direction, and scanning. Finally, we proved usefulness of proposed inverter through experiment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.694-697
• /
• 2003

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by adjusting between on time and off time for video signal input during 1 frame (16.7ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by blinking drive. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.707-710
• /
• 2009

As the inner diameter of CCFL is increased in the range of outer diameters 3~5 mm, the luminance efficiency is increased by the low power consumption. For the outer diameter 5 mm, the efficiency is linearly increased even at the range of a high current.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.600-603
• /
• 2000

Recently, Display devices have become important in the information-oriented society and flat display devices are greatly demanded. Liquid crystal display(LCD) represents one of the most promising devices for large size desk-top monitors, notebook PC and car navigation system. However LCD cannot give forth light itself and must have backlight system. The most popular backlighting system is composed of a lighting-guide plate and CCFL as a lighting source. The number of CCFL must increase up if the area of display is increased. So a new backlighting source with high luminance is needed for large LCDs. In this paper, we proposed a surface discharge FFL with the new electrode structure like the needle shaped electrode as the variation of cell structure to high luminance and low power consumption. In comparison with different electrode structure it has low discharge voltage and current and good optical characteristics. So it has better discharge characteristics than different surface discharge FFL and can be fungible for a backlight as a lighting source in LCDs.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.183-186
• /
• 2001

평판 디스플레이의 기술이 급격히 발전함에 따라 그 응용 분야가 다양해지고 평판 모니터용 LCD도 대형화추세를 보이고 있다. LCD는 광변조기능을 가지는 수광소자로서 발광원인 백라이트(backlight)를 필요로 하는데 백라이팅 기술은 냉음극방전램프(CCFL: Cold Cathode Fluorescence Lamp)를 광원으로 사용하며 사용되는 냉음극 방전램프 또한 모니터의 추세에 따라 길어지고 얇아지고 있다. 본 논문에서는 20인치의 대형 LCD 모니터의 백라이팅 즉 램프구동을 위한 안정적이면서 대출력을 가지는 인버터를 설계하였다. 일반적으로 CCFL은 같은 제조공정을 거치더라도 점등, 주파수, 전압, 전류 등 여러 가지 특성이 동일하지 않은 단점을 가지고 있는데 이는 초기 점등조건이나 점등후에 동일한 휘도를 가지는데 어려움을 준다. 본 연구에 사용된 20인치 LCD 모니터는 내부에 상하 각각 3개씩 6개의 램프를 내장하고 있으며, 제작된 인버터는 입출력 휘도대비 90%의 효율을 얻었으며, 램프간의 출력전류차가 2%로 미소하고, 최대 8개의 램프구동도 가능하다.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.268-270
• /
• 2007

LCD Backlight 구동 응용을 위한 새로운 인버터 회로 Topology인 Dual Active Clamp Forward (ACF) Inverter를 제안한다. 제안된 회로는 LCD의 광원 역할을 하는 냉음극 형광램프(Cold Cathode Fluorescent Lamp, CCFL) 구동을 위한 회로로서, 넓은 입력 범위 및 부하 범위에서도 영 전압 스위칭 동작을 보장하며, 출력 AC 전류의 대칭성을 보장한다. 더욱이 기존 Symmetric Phase Shift Full Bridge방식은 특허 우선순위가 있는 방법으로써, Dual ACF Inverter를 사용할 경우 특허 Royalty 부담을 줄일 수 있다. 본 논문에서는 제안된 회로의 동작원리에 대한 타당성을 이론적 분석 및 모의실험을 통하여 검증한다.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.150-152
• /
• 2007

LCD Backlight 구동 응용을 위한 새로운 인버터 회로 Topology인 Modified Half Bridge Inverter를 제안한다. 제안된 회로는 LCD의 광원 역할을 하는 냉음극 형광램프(Cold Cathode Fluorescent Lamp, CCFL) 구동을 위한 회로로서, 제안된 회로는 주 스위치의 동작 시비율이 낮을 때도 보조 스위치를 이용하여 환류 구간을 형성함으로써 주스위치의 영 전압 스위칭 동작을 보장할 수 있다. 제안된 회로의 동작원리를 설명하고, 타당성을 Simulation 및 실험을 통하여 검증한다.