• Journal of the Korean Society for Railway
• /
• v.11 no.3
• /
• pp.211-215
• /
• 2008

Generally, an EMU (Electronic Multiple Unit) is manufactured by assembling a large number of components and parts with extensive raw materials. Throughout its entire life cycle, much both the complicated system and long operating period. Therefore, it is necessary to the environmental performance of EMUs from raw materials to waste. In this study, RACE (Rail Assessment for Clean Environment) was developed as the software that can analyze the environmental RACE had several LCI (Life Cycle Inventory) database for main components as well as principal materials in EMUs. In the future, RACE can also be used as a tool for environmental communication between manufacturers and operators. Also, we will improve RACE continuously to assess more easily the environment of rolling stocks EMU for user.

• Clean Technology
• /
• v.3 no.1
• /
• pp.88-95
• /
• 1997

Energy required, air emission, and solid waste generation are calculated with available foreign data ad domestic status using Life Cycle Analysis in order to compare the environmental impact of beverage containers such as PET bottle, aluminum can, glass bottle, and paper pack. Glass bottles are found to be the worst acceptability when considering only recycling rate of glass cullet, however it becomme the best when the refill(reuse) rate of glass bottles is accounted into. To assess tile current and future environmental impact of beverage containers, energy required, air emission, solid waste generation of current data and recycling goals are compared. As a result of the study, recycling of each containers and the reuse of glass bottles must be increased by governmental enforcement to reduce the environmental impacts by beverage containers. Further study on this subject using detailed LCA(life cycle assessment) data should be implemented for the exact environmental and economic assessment.

• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.643-658
• /
• 2015

This study presents detailed emission of greenhouse gases of using Clean Energy Agriculture System according to a cradle-to-gate life-cycle assessment, including emission from energy use and leak of Biogas. Calculations were done with the PASS software and the covered gases are $CH_4$, $N_2O$ and $CO_2$, Total GHG fluxes of amount to $1719.03kgCO_2/day$, $39.63kgCO_2/day$ (2.31%) are from facility house process, $0.19kgCO_2/day$ (0.01%) are from transport process, $696.72kgCO_2/day$ (40.53%) are from Anaerobic digestion process, $846.61kgCO_2/day$ (49.25%) are from Heating and cooling system, $135.88kgCO_2/day$ (7.90%) are from Fertigation production process. The results suggest that for effective reduction of GHG emissions from Facility house using clean energy. Reduction targets should address both the production process as defined by IPCC sectors and the consumption process. An LCA assessment as presented here could be a basis for such efforts.

• Korean Journal of Organic Agriculture
• /
• v.21 no.2
• /
• pp.189-205
• /
• 2013

Climate change is rapidly getting worse. In Korea, the average temperature has increased by $1.5^{\circ}C$ over the last 100 years. In terms of global warming, it causes regional climate change, extreme weather phenomena and change of cultivated area. moreover, Global Warming brings both direct and indirect damage to agricultural cultivation. Global warming was accelerated by the greenhouse gas emissions which is by industry. In addition, Greenhouse gas emissions are increasing. In agriculture Thus we need to figure out how to analyze and to reduce greenhouse gas emissions and its cause. This study assumes that it is the introduction of the bio-energy using compost to facility house and it analyzes that there is the difference between in the future in utilizing compost due to the introduction of bio-energy facility houses; Environmental effect and Environmental effect which are generally used. This research is a previous step for resource-circulating, farming, utilizing a variety of by-products of the agricultural sector as an environmental assessment studies for the future completion of resource-circulating agriculture.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.267-274
• /
• 2011

The environmental impacts of 95% remediation of a total petroleum hydrocarbon-contaminated soil were evaluated using life cycle assessment (LCA). LCA of two remediation systems, soil vapor extraction (SVE) and biopile, were conducted by using imput materials and energy listed in a remedial system standardization report. Life cycle impact assessment (LCIA) results showed that the environmental impacts of SVE were all higher than those of biopile. Prominent four environmental impacts, human toxicity via soil, aquatic ecotoxicity, human toxicity via surface water and human toxicity via air, were apparently found from the LCIA results of the both remedial systems. Human toxicity via soil was the prominent impact of SVE, while aquatic ecotoxicity was the prominent impact of biopile. This study also showed that the operation stage and the activated carbon replacement stage contributed 60% and 36% of the environmental impacts of SVE system, respectively. The major input affecting the environmental impact of SVE was electricity. The operation stage of biopile resulted in the highest contribution to the entire environmental impact. The key input affecting the environmental impact of biopile was also electricity. This study suggested that electricity reduction strategies would be tried in the contaminated-soil remediation sites for archieving less environmental impacts. Remediation of contaminated soil normally takes long time and thus requires a great deal of material and energy. More extensive life cycle researches on remedial systems are required to meet recent national challenges toward carbon dioxide reduction and green growth. Furthermore, systematic information on electricity use of remedial systems should be collected for the reliable assessment of environmental impacts and carbon dioxide emissions during soil remediation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.516-516
• /
• 2017

기후변화로 인하여, 홍수, 사막화, 엘니뇨 등의 자연재해가 이전보다 더 발생하고 있다. 기후변화 적응은 전 세계적으로 기후변화 대응보다 중요해지고 있다. 기후변화 적응을 위한 이슈 중 하나가 물 순환이다. 각 국가에서는 물 순환을 활성화하기 위한 기술을 개발하고 있다. 특히, 저영향개발(LID, Low Impact Development)이라는 물을 확보하기 위한 정책이 각 국가별로 추진되고 있으며, 이에 따른 기술이 개발되고 있다. 국내에서도 2001년에 국토해양부는 수자원장기종합계획을 발표하고, 환경부에서는 2013년에 LID기술요소 가이드라인과 환경영향평가 시 적용 가능한 저영향개발 매뉴얼을 개발하는 등 LID기술을 개발하고 적용하기 위한 정책을 펼치고 있다. 이러한 LID기술 중 하나가 빗물 집수시스템이며, 이 빗물집수시스템은 주거지역에서 빗물을 배수하고, 집수하여 빗물을 이용하기 위해 적용되고 있다. 현재 적용되고 있는 빗물 집수시스템은 측구 집수시스템과 원형 집수시스템이 있으며, 최근에는 수로형 집수시스템이 적용되는 지역도 있다. 본 연구에서는 전과정 평가(LCA, Life Cycle Assessment)를 이용하여 빗물 집수시스템의 환경성을 평가하고자 한다. 현재, 국내에서는 녹색건축물인증, 탄소성적 표지인증, 환경성적 표지인증 등 LCA를 이용하여 환경성을 평가하고 있다. 특히, 본 연구에서는 기후변화 측면에서 LCA를 적용하여 이산화탄소배출량을 평가하고자 하였다. 본 연구의 범위는 빗물집수시스템 30m로 가정하였으며, 측구 집수시스템, 원형 집수시스템 및 수로형 집수시스템의 건설, 운영 및 유지관리, 해체 및 폐기단계의 전 과정이다. 각 빗물 집수시스템에 대해 각 단계별로 이산화탄소 배출량을 산정한 결과, 수로형 집수시스템은 $2.82\;ton\;CO_2\;eq./set$이며, 원형 집수시스템은 $27.65\;ton\;CO_2\;eq./set$, 측구 집수시스템은 $21.54\;ton\;CO_2\;eq./set$이 배출되었다. 이산화탄소배출량 측면에서는 수로형 집수시스템이 나머지 두집수시스템보다 87~90%가 저감되는 것으로 나타났다. 본 연구는 저영향개발에 대응하는 동시에 기후변화를 대응한다는 측면에서 빗물 집수시스템 정책에 활용되고, 설계시에도 반영될 수 있을 것으로 사료된다. 추가적으로 이산화탄소뿐 만 아니라, 다른 환경성을 평가하는 연구가 진행될 필요가 있다.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.4
• /
• pp.268-276
• /
• 2011

The product-level carbon footprint (PCF) is a comprehensive and widely accepted metric for sustainable product development. However, since a full PCF study in general is time and cost intensive, it is not feasible for the product development team to synchronize the activity to the main product development process. In addition, the current dedicated life cycle assessment (LCA) tools for calculating PCF, separated from the main product data management systems, have limitations to provide timely PCF information for design decision makings and collaborations between design and environment engineers. This paper examines the possibility of the extension of the current product data model that can support the PCF calculation with PDM (Product Data Management) databases. The product data model can represent not only the content of products but also context or system information of the products. The product data model can be implemented as a PDM database that can satisfy the needs for handy and timely PCF calculations from the consistent product data for dynamic design decision makings and engineering collaborations.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.355-359
• /
• 2009

Recently, the railway has been growing as the eco-friendly transport which is excellent for reducing carbon dioxide. However, the level of using tools to quantitatively and objectively evaluate the environmental performance is still low in the rail industry. Therefore, it is necessary to introduce Environmental Product Declaration(EPD) which describes the environmental performance by using Life Cycle Assessment(LCA) for evaluating the environmental impacts through entire life cycle of a product. The EPD enables stakeholders including policy makers, operation body, vehicle manufacturers and drivers and consumers to be informed about the superior environmental performance of rail vehicles.

• Clean Technology
• /
• v.28 no.3
• /
• pp.203-209
• /
• 2022

An environmental evaluation was conducted by employing LCA methodology for a mechanical seal manufacturing process that uses recycled silicon recovered from end-of-cycle PV modules. The recycled silicon was purified and reacted with carbon to synthesize β-SiC particles. Then the particles underwent compression molding, calcination and heat treatment to produce a product. Field data were collected and the potential environmental impacts of each stage were calculated using the LCI DB of the Ministry of Environment. The assessment was based on 6 categories, which were abiotic resource depletion, acidification, eutrophication, global warming, ozone depletion and photochemical oxidant creation. The environmental impacts by category were 45 kg CO₂ for global warming and 2.23 kg C₂H₄ for photochemical oxide creation, and the overall environmental impact by photochemical oxide creation, resource depletion and global warming had a high contribution of 98.7% based on weighted analysis. The wet process of fine grinding and mixing the raw silicon and carbon, and SiC granulation were major factors that caused the environmental impacts. These impacts need to be reduced by converting to a dry process and using a system to recover and reuse the solvent emitted to the atmosphere. It was analyzed that the environmental impacts of resource depletion and global warming decreased by 53.9% and 60.7%, respectively, by recycling silicon from end-of-cycle PV modules. Weighted analysis showed that the overall environmental impact decreased by 27%, and the LCA analysis confirmed that recycling waste modules could be a major means of resource saving and realizing carbon neutrality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.801-810
• /
• 2015

With the international community's efforts to respond to climate changes progressing in the world, Green IT technologies have also developing rapidly. As green IT technologies against climate change has emerged as the agenda of social sciences, the concept of green IT has evolved into two types: greening of IT and greening by IT. In this context, this study reviewed in depth green IT research trends as well as concepts of greening of IT and greening by IT to respond to climate change. Furthermore, it proposed a life cycle assessment (LCA) as an indicator for assessing green IT. The results of this study are expected to contribute to solving political problems with green IT and continuing research in the climate change era. They are also expected to make a contribution to the development of IT industry in Korea by presenting the concepts of greening of IT and greening by IT.