• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.4
• /
• pp.9-17
• /
• 1998

BiNbO$_{4}$ ceramics with 0.07wt% V$_{2}$O$_{5}$ and 0.03wt% CuO (BNC3V7) sintered at 900 .deg. C where it is possible for these to be co-fired with ag electronde. Dielectric constant of 44.3 TCF (Thermal Coefficient of resonance Frequency) of 2 ppm/.deg. C and Qxf value 22,000 GHz can be obtained from BNC3V7. the laminatedchip LC filter is indispensible to the minimaturization of PCS (Personal Communication System) terminals. Therefore, multilayer type BPF has been fabricated by screen-printing with silver electrode after tape casting. The simulated characteristics of the fabricated filters sintered at 900.deg. C werecomparedwith the designed ones. for Band Pass Filter widths was similar that ofdesigned ones. For Low Pass Filter (LPF), insertion loss value of band pass widths (2.4 dB) which is a few higher than that of designed (1dB), but characteristization of band pass widths was similar that of designed ones.s.of designed ones.s.

• The korean journal of orthodontics
• /
• v.28 no.6 s.71
• /
• pp.955-974
• /
• 1998

The purpose of the present study was to seek bracket-adhesive combinations which have adequate bond strength with no enamel and bracket fracture. The shear bond strengths were measured, the sites of failure and the enamel damage were investigated and the peripheral sealing and adaptation between enamel surface, bonding adhesive and bracket were evaluated. 240 noncarious human premolars were divided into twenty four groups of ten teeth. Shear bond strengths of each group were determined in an universal testing machine after two days passed and the debonded specimens were inspected to determine the predominant bond failure sites. To evaluate peripheral sealing and adaption between enamel surface, adhesive and bracket, each specimen was cut longitudinally into two halves which included the midsection of the bracket, adhesive and enamel and exmined in scanning electron microscope. Six different types of brackets were bonded to the tooth with four different type of adhesives. Six different types of brackets were Image, Plastic, Crystaline, Fascination, Transcend 2000 and metal bracket and four different adhesives were No-mix, Light-Bond, OrthoLC and Superbond C&B. From this study, it may be concluded that (1) The mean shear bond strength varied from a high of 36.58 Kg (410.07 Kg/$cm^2$) with the Fascination-Light Bond combination group to a low of 8.93 Kg (75.51 Kg/$cm^2$) with theImage-OrthoLC combination group. When using OrthoLC as adhesive, the mean shear bond strength was significantly lower than that of other combination groups, (2) Regardless of adhesives, the mean shear bond strength of Fascination brackets was relatively high whereas Plastic and Image brackets had low shear bonding strength. The shear bond strength of Crystaline bracket and Transcend 2m was relatively equal to or lower than that of metal bracket, (3) There was a correlation between bond strength, enamel damage and bracket fracture. As the shear bond strength was increased, the rate of enamel damage and bracket fracture were increased, (4) The combination groups that use OrthoLC as adhesive were debonded in shear stress without enamel fracture and bracket fracture, whereas the combination groups that use Superbond C&B as adhesive experienced a relative high enamel fracture rate and bracket fracture rate, (5) Peripheral sealing and adaptation between enamel-adhesive-bracket were relatively good when using Light-Bond or No-mix as adhesive. Regardless of adhesives, adaptation between bracket-adhesive were relatively good in Ceramic brackets, (6) The combination groups which had adequate bonding strength with no enamel and bracket fracture were Crystaline-No mix, Crystaline-Light Bond, Crystaline-OrthoLC, metal-No mix, metal-Light Bond and metal-OrthoLC combination groups.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.3
• /
• pp.268-273
• /
• 2019

This study evaluated acute nitrate nitrogen ($NO_3-N$) toxicity in juvenile blackhead seabream Acanthopagrus schlegelii. Seventy juveniles (Trial A, $7.1{\pm}0.6g$) and nine juveniles (Trial B, $71.3{\pm}3.5g$) per 70 L tank were exposed to $NO_3-N$ concentrations of 0, 500, 1500, 2500, 3500, and 4500 mg/L and 0, 600, 1200, 1800, 2400, and 3000 mg/L, respectively, in triplicate for 7 days. In Trial A, all fish exposed to 3500 and $4500mg\;NO_3-N/L$ died within 48 h; in Trial B, all fish exposed to $3000\;NO_3-N/L$ died after 120 h. The $96\;LC_{50}$ and $168\;LC_{50}$ were 2505 and $1806mg\;NO_3-N/L$, respectively, in Trial A, and 2663 and $2377mg\;NO_3-N/L$ in Trial B. Large juveniles were more resistant to $NO_3-N$ than small juveniles. The results of acute $NO_3-N$ toxicity studies provide important data for subsequent chronic toxicity studies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.173-175
• /
• 2005

The effects of PCB Board on the filter characteristics such as insertion loss and transmission characteristics were investigated for the measurement of 5GHz LC filter. Insertion loss measured with PCB Board of Teflon is 0.3 dB lower in comparion with FR-4. The filter characteristics measured in the passband were different from the calculated results. In comparison with the calculated value, the measured value shows that center frequency is 20MHz lower, passband is narrower and insertion loss is larger. The difference of Insertion loss between Teflon and FR-4 increases with increasing measurement frequency.

• Journal of Information Display
• /
• v.2 no.3
• /
• pp.32-38
• /
• 2001

The most important parameter for TV application of LCD is a fast switching time for the display of moving image. To achieve faster switching time, the novel LC single materials with large dielectric anisotropies ($16{\sim}20$), high clearing temperatures ($195.5{\sim}237.4^{\circ}C$), broad nematic ranges (up to 169.9 $^{\circ}C$) and high birefringence ($0.254{\sim}0.2200$) were developed. KUR-series LC mixtures blended these single materials having significantly higher clearing temperatures and dielectric anisotropy values compared with conventional LC mixture. Especially, their clearing temperatures are $10{\sim}30^{\circ}C$ higher than their host mixture. These LC mixtures showing about lOms of high-speed switching time in Tv/Monitor of TFT LCD, is short enough to be addressed in a single time frame of 60Hz (16.7 ms). The threshold voltage $V_{th}$ was low enough to operate at a driving voltage of 5 V. The VHR values were found to be high enough for TFT-LCD in wide temperature range. Our novel LC mixtures are suitable materials for the inclusion in to LC mixtures for TV application of TN-LCD

• Journal of the Korean Applied Science and Technology
• /
• v.13 no.2
• /
• pp.29-37
• /
• 1996

The phase separated structure and the electo-optical properties of the polymer /liquid crystal(LC) composite films including a dye were investigated. The phase separated structure of the polymer /LC / dye composite film(GH composite film) including below 2wt% dye against LC was almost same with the composite film which does not include dye. But the electro-optical properties of the GH composite film strongly depended on weight fraction of the dye against the LC. The response time of the GH composite film increased with the increase of the dissolved dye in LC because the dye acts as a registivity for the orientation of LC molecules by the electric filed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.158-165
• /
• 2013

In this paper, a new circuit topology of an ultra-wideband (UWB) 3.1-10.6GHz CMOS low noise amplifier is presented. The proposed UWB low noise amplifier is designed utilizing RC feedback and LC filter networks which can provide good input impedance matching. In this design, the current-reused topology is adopted to reduce the power consumption and the inductor-peaking technique is applied for the purpose of bandwidth extension. The performance results of this UWB low noise amplifier simulated in $0.18-{\mu}m$ CMOS process technology exhibit a power gain of 14-14.9dB, an input matching of better than -10.8dB, gain flatness of 0.9dB, and a noise figure of 2.7-3.3dB in the frequency range of 3.1-10.6GHz. In addition, the input IP3 is -5dBm and the power consumption is 12.5mW.

• Journal of dental hygiene science
• /
• v.21 no.3
• /
• pp.178-184
• /
• 2021

Background: As the importance of the esthetic function of teeth increases, the use of esthetic restoration materials and whitening treatment are increasing. The purpose of this study was to investigate the color change of esthetic restoration materials upon using staining and whitening toothpaste. Methods: Light curing (LC) packable composite resin, LC flowable resin, LC glass ionomer (GI), and self-curing GI specimens were colored in coffee or curry for three hours a day for seven days. After that, regular toothpaste, whitening toothpaste containing hydrogen peroxide, and whitening toothpaste containing activated charcoal were applied for three minutes three times a day for two weeks. Luminosity (L), chromaticity a (a), and chromaticity b (b) were measured using a spectrophotometer once a week. Results: In the coffee-colored group, the change in L^2*a^2*b² (E²) with time was significant (p=0.004), there was no difference for different toothpaste types (p=0.646), and there was significant difference (p<0.001) for different esthetic restorative materials. The change of E² in the curry-colored group was significant only for different esthetic restorative materials (p<0.001). In the coffee-colored group, the L, a, and b values of the light-curing GI showed greater change than other materials after staining and one week after whitening, turning dark, red, and yellow. In the curry-colored group, L did not differ for different materials and times, and a and b showed the greatest difference in light-curing GI after staining and one and two weeks after whitening. Conclusion: The use of whitening toothpaste for two weeks was not different from the use of general toothpaste in the removal of staining or whitening. Since light-curing GI is the most vulnerable to coloration, it is recommended that coloring by food chromogen should be explained in advance, before using light-curing GI for teeth restoration.

• Journal of Life Science
• /
• v.25 no.7
• /
• pp.810-818
• /
• 2015

We analyzed whether lactic acid bacteria could control the expression of IL-4 and IL-13 in activated mast cells and whether these bacteria could inhibit the activity of transcription factors such as GATA-1, GATA-2, NF-AT1, NF-AT2, and NF-κB p65. We previously described a technique for identification of lactic acid bacteria with anti-atopy functionality by confirming increased expression of CD4+/CD25+/foxp3+ in T cells. We also confirmed that a double-culture method increased the antibacterial activity of these lactic acid bacteria against Staphylococcus aureus (S. aureus). In the present study, we characterized the effect of lactic acid bacteria cultured by this double-culture method on inhibition of allergic inflammatory reactions of RBL-2H3 mast cells, a cellular model of atopic dermatitis. The strongest anti-allergic effects of the lactic acid bacteria were seen in the following order: Lactococcus lactis broth cultured with medium containing Lactobacillus plantarum culture supernatant > Lc. lactis > Lc. lactis broth cultured with medium containing Lb. plantarum culture supernatant > Lb. plantarum. Thus, Lc. lactis cultured in medium containing Lb. plantarum culture supernatant had the strongest inhibitory effect on the differentiation of mast cells during allergic reactions, which may be mediated through the selective regulation of expression of relevant genes.

• Korean Journal of Poultry Science
• /
• v.9 no.2
• /
• pp.63-101
• /
• 1982

A study was conducted to investigate the possibility of improving the effectiveness of the existing method(s) to estimate the edible meat weight in live broiler chicken. Four. breeds of chicken, white Cornish broiler chicks(parent stock), Single Comb White Leghorn(SCWL) egg strain chicks (parent stock), and two reciprocal cross breds of these parent stocks were employed in this study. A total of 480 birds, 60 male and 60 female chicks for each breed, were used. Ten male and 10 female chicks from each breed were randomly sacrificed at 0, 2, 4, 6, 8 and 10 weeks of ages in order to measure the body weight, edible meat weight of breast and 1eg(thigh and drum-stick), various components of body weight and various body shape measurements. In addition, chemical analyses of edible meat were carried out. Results obtained from this sturd were summarized as follows. 1. The average body weights of White Cornish broiler chicks and SCWL egg strain chicks were 1.82${\pm}$0.048kg(X${\pm}$S.E.) and 0.67${\pm}$0.029 kg. respectively, at 8 weeks of age. The feed to gain ratio for White Cornish and SCWL chicks were 2.24 and 3.28, respectively, for 0 to 8 weeks of age. The reciprocal cross bred chicks (White Cornish ${\times}$ SCWL) showed intermediate values in both parameters.