• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.67-70
• /
• 2003

The control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by hot plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC ($\Delta\varepsilon$ >0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The tilt angle of positive type NLC ($\Delta\varepsilon$ >0) is smaller than that of the negative type ($\Delta\varepsilon$ >0) on rubbed PI with increasing baking temperature and time. We consider that the tilt angle of NLC is decreased due to increasing the steric interaction between horizon component of permittivity $\varepsilon$ = of NLC and the stress of polymer side chain by high temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.41-42
• /
• 2006

Carbon nanotubes (CNTs) effects on physical properties of the liquid crystal and twisted nematic (TN) liquid crystal (LC) cells have been investigated. The minute doping of CNTs reduces rotational viscosity of the LC, and thus switching time of the TN cells is improved, especially in grey scale response time. In addition, the dielectric anisotropy and birefringence are not affected by such a small amount of CNT-doping and thus voltage-dependent transmittance remains the same.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.04a
• /
• pp.64-65
• /
• 2006

We studied the nematic liquid crystal (NLC) alignment capability by the IB(on bean) alignment method on a NDLC(Nitrogen Diamond Like Carbon) as a-C:H thin film, and investigated electro-optical performances of the IB aligned IPS(In plane switching}cell with NDLC surface. A good LC alignment by IB exposure on a NDLC surface was achieved. Monodomain alignment of the IB aligned IPS cell can be observed. The goodelectro-optical (EO) characteristics of the IB aligned IPS cell was observed with oblique IB exposure on the NDLC as a-C:H thin film for 1 min.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.181-184
• /
• 2005

In this paper, we have improved a novel fast response time liquid crystal operating mode using tilt angle in the unique condition by hot-plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot-plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC (${\Delta}n$>0) on the rubbed homeotropic PI surface by increasing temperature and time was measured. The EO characteristics of the high tilted OCB(HTOCB) mode using control of tilt angle on the homeotropic surface than that of conventional OCB cell can be improved. We suggest that the developed the HTOCB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.100-103
• /
• 2005

Homogeneously aligned nematic liquid crystal modes are representatively the -FFS (fringe-field switching) mode using liquid crystal (-LC) with negative dielectric anisotropy, the +FFS mode and the IPS (in-plane switching) mode using +LC with positive dielectric anisotropy. In view of image quality evaluation standard of LCD, we compared characteristics of the brightness, the contrast ratio (CR) and color shift when the modes have respectively optimized phase retardation values $(d{\Delta}n)$. Consequently, in the most sensitively viewing angle of a man's physical vision, both FFS modes have advantage over the IPS mode from the brightness & the CR point of view. We are also confirmed that the +FFS mode out of them shows the smallest color shift according to all viewing directions in grey levels.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.155-166
• /
• 2016

It is important to configure capacitance(C) of the capacitor and the induction coefficient(L) of the work coil on the resonant circuit design stage in order to induce heating on the object by a precise and constant frequency components in the electromagnetic induction heating equipment. Work coil conducts a direct induction heating according to heating point and area of the object which has a fixed heat factor so that work coil is designed to has fixed value. On the other hands, Capacitor should be designed to be changed in order to be the higher the utilization of the entire equipment. It is extracted the samples by variation of single electrode capacity from the selection stage of raw materials for capacity to the stage of process design for output of the high frequency LC resonance of 700kHz on 1000 VAC maximum voltage and current to $200I_{MAX}$. It is suggested fundamental experiment results in order to prove relation for the optimal design of HF-LC resonance conduction-cooled capacitor based on the response of frequency characteristics and results of output parameters according to variation of the capacitance size.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.252-260
• /
• 2022

In Korea, low-quality kaolin has significantly greater reserves and superior economic efficiency than high-purity kaolin. However, the utilization is low because it does not match the demand conditions of the market, and it is difficult to find a suitable source of demand. The purpose of this study is to derive the possibility and optimal calcination temperature of domestic low-quality kaolin that can be used as a raw material for limestone plastic clay cement (LC³). Isothermal calorimetry, X-ray diffraction analysis, Thermogravimetric Analysis, and compressive strength tests were conducted to evaluate hydrate generation and mechanical properties of LC³ paste according to calcination temperatures (600 ℃, 700 ℃, 800 ℃, 900 ℃). As a result, although 50 % of the clinker was replaced, the domestic low-quality kaolin clay produced calboaluminate hydrate and C(A)SH from the 3rd day of hydration, showing almost equal or higher strength to OPC, and there was a big difference in strength depending on the firing temperature.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.343-349
• /
• 2013

Environment-friendly agro-materials tend to be preferred to chemical insecticides recently. For this reason, many studies are conducted to develop environment-friendly insecticides containing natural materials. The purpose of this study was to assess ecotoxicity for pepper extract and cassia oil (11.5+46%, A), pepper extract and cassia oil (23+34%, B), and pepper extract and lavender oil (40+10%, C). They are expected to prevent from pests especially diamondback moth, and can be used for agro-materials. Their formulation was emusifiable concentration (EC). Target species used to assess acute toxicity were aquatic invertebrate (Daphina magna), fish (Cyprinus carpio), honeybee (Apis mellifera L.) and earthworm (Eisenia fetida). The $EC_{50}$ value of A, B, and C to aquatic invertebrate were 0.46, 1.9, 0.25 mg $L^{-1}$ respectively and these values were moderately toxic according to standard of USEPA. In case of acute toxicity test to fish, the $LC_{50}$ of A, B, and C were 1.9, 2.9, 3.8 mg $L^{-1}$ respectively. A was category II in acute toxicity of fish and not acceptable to evaluation criteria of environment-friendly agro-materials. B and C were category III and acceptable. Acute contact and oral toxicity test to honeybee were conducted and the $LD_{50}$ of A, B, and C were > 100 ${\mu}g$ a.i. $bee^{-1}$ in both of tests. It indicated they were low toxic to honeybee. In case of acute toxicity test to earthworm, $LC_{50}$ of A, B, and C were 695, 988, and 564 mg $kg^{-1}$. In conclusion, pepper extract+cassia oil 57% EC and pepper extract+lavender oil 50% EC were expected to be used for environment-friendly insecticide materials with low risk against ecosystem and contribute to developing environment-friendly agro-materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.482-483
• /
• 2003

We have synthesized a new material of polyoxetane based liquid crystalline polymer/liquid crystal (LCP/LC) for flexible memory or dynamic mode device and characterized the electro-optics behavior of this system. The microscopic dynamic behavior of main chain, side chain, and the low molecular weight LC were characterized by X-ray scattering and time resolved FTIR..

• Electrical & Electronic Materials
• /
• v.10 no.9
• /
• pp.876-880
• /
• 1997

In this paper we investigated the transcription of liquid crystal (LC) alignment method by using memory effect of nematic(N) LCon polymide(PI) surface with side chain as for non-rubbing alignment techniques. That the monodomain alignment of aligned NLC is observed by microscope textures in the cells on PI surface with side chain. We obtained that the pretilt angle of NLC are generated about 3.7$^{\circ}$on PI surface. We suggest that the LC alignment by using transcription alingnment method is attributed to memory effect of NLC on PI surface.