• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.931-935
• /
• 2003

A multilayer two-stage LC bandpass filter using low-temperature cofired-ceramic(LTCC) is proposed in this paper. The proposed bandpass filter is composed of two ceramic substrates with different dielectric constant instead of single ceramic material from top to bottom layer. Inductive elements are designed in a low permitivity ceramic layer to reduce parasitic effects and loss, while capacitive elements are designed in a high permitivity ceramic layer for size reduction. The proposed filter has 950 MHz center &equency, 118 MHz tractional bandwidth, and 3.5 dB insertion loss. And, the total size of this filter is 2.5${\times}$2.5${\times}$l.4mm$^3$. The performance of filter is analyzed by changing coupling capacitance between each resonator.

• Korean Journal of Agricultural Science
• /
• v.38 no.3
• /
• pp.473-477
• /
• 2011

A number of health benefits have been claimed for probiotic bacteria such as Bifidobacterium (B) spp. Lactobacillus(L) acidophilus, and Lactococcus(Lc) cremoris. Viability of probiotic bacteria is important in order to provide health benefits. Only a limited culture media for the test purpose of probiotic bacteria are commercially available (MRS broth), but the media for large-scale propagation of viable cells which are able to be used as food additive are not available. The manufacture of a low priced and preferred novel medium for probiotic bacteria was therefore, attempted using whey protein concentrate(WPC) and Makgeolli sludge as a starting material. The effect of WPC and Makgeolli sludge on the growth of four strains (B. bifidum 15696, B. longum 15707, L. acidophilus CH-2, and Lc. cremoris 20076) was investigated. Medium prepared such as WPC, Makgeolli sludge, and WPC+Makgeolli sludge(WPCMs). It was observed that the growth of 4 strains (B. bifidum 15696, B. longum 15707, L. acidophilus CH-2, and Lc. cremoris 20076) was stimulated by Makgeolli sludge, WPC, WPCMs. Especially, Viable cell number of 4 strains in the WPCMs were higher than that of the single media. These result suggest the possibility that Makgeolli and WPC, acts as a growth factor for the growth of probiotic bacteria.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.188-193
• /
• 2000

A more accurate life prediction for gas turbine blade takes into account the material behavior under the complex thermo-mechanical fatigue(TMF) cycles normally encountered in turbine operation. An experimental program has been carried out to address the thermo-mechanical fatigue life of the IN738LC nickel-base superalloy. In the first phase of the study, out-of-phase and in-phase TMF experiments have been performed on uncoated and coated materials. In the temperature range investigated. the deposition of NiCrAlY air plasma sprayed coating did not affect the fatigue resistance. In the second phase of the study, a physically-base life prediction model that takes into account of the contribution of different damage mechanisms has been applied. This model was able to reflect the temperature and strain rate dependences of isothermal cycling fatigue lives, and the strain-temperature history effect on the thermo-mechanical fatigue lives.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3228-3232
• /
• 2010

Malachite green (MG) has been used world-widely in aquaculture as a parasiticide or fungicide. Although MG performed successfully, it has not been permitted for use in aquaculture from European Union, USA, and Canada because of its carcinogenicity and mutagenicity. We developed a sensitive and specific method to determine MG and its principal metabolite, leucomalachite green (LMG), respectively by isotope dilution liquid chromatography mass spectrometry (ID-LC/MS). To enhance the extraction recovery of MG and LMG from fish tissue, an additional step, saponification, was introduced in sample preparation process to remove fat in sample extract, which hampered the performance of SPE columns. The residue of MG and LMG in fish was analyzed using liquid chromatography mass spectrometry in the selected ion monitoring (SIM) mode by monitoring at m/z 329 and 334 for MG and $d_5$-MG and at m/z 331 and 337 for LMG and $^{13}C_6$-LMG, respectively. This method was validated by comparing with the value of the reference material provided by Laboratory Government Chemistry (LGC). The results agreed within the measurement uncertainty and the accuracy was much improved than the provided reference value by LGC.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.749-756
• /
• 2014

A rapid and simple analytical method for L-carnitine was developed for infant and toddler formulas by liquid chromatography tandem mass spectrometry (LC-MS/MS). A 0.3 g of infant formula and toddler formula sample was mixed in a 50 mL conical tube with 9 mL water and 1 mL 0.1 M hydrochloric acid (HCl) to chemical extraction. Then, chloroform was used for removing a lipid fraction. After centrifuged, L-carnitine was separated and quantified using LC-MS/MS with electrospray ionization (ESI) mode. The precursor ion for L-carnitine was m/z 162, and product ions were m/z 103 (quantitative) and m/z 85 (qualitative), respectively. The results for spiked recovery test were in the range of 93.18-95.64% and the result for certified reference material (SRM 1849a) was within the range of the certificated values. This method could be implemented in many laboratories that require time and labor saving.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.317-318
• /
• 2009

In this paper, we observed stretching of carbon nanotube (CNT) aggregates driven by the electric filed in a nematic liquid crystal (LC) medium. The CNT aggregates started to stretch above a threshold filed which is $1.5\;V/{\mu}m$ and the original CNT length which is $1.7{\mu}m$ was stretching up to $19.2\;{\mu}m$ at $3.5\;V/{\mu}m$ electric filed. When the CNT aggregates became to stretching, the width and length of CNT aggregates became narrow and long, respectively. The original morphology of the CNT aggregates was restored upon removal of filed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.2
• /
• pp.185-188
• /
• 2006

We studied on the reverse twist near the pixel edge depending on the rubbing direction for the fringe field switching (FFS) mode. Liquid crystal (LC) dynamic and the transmittance near the pixel edge, where the various field directions are generated, depend on the initial rubbing direction because the position of reverse twist is decided by the angle between the electric direction and the LC director at a bias voltage. For example, when the rubbing angle is $7^{\circ}$, the reverse twist appears on the bottom position of the right sharp comer of the pixel edge so that the reverse region exists far away from main active region. But, when the rubbing angle is $-7^{\circ}$, the reverse twist appears on the top position of the right sharp comer of the pixel edge, resulting that the region becomes more close to the main active area and the unstable disclination lines (DLs) easily intrude into the active region. Therefore, it is necessary to keep the reverse twist region far from the active region and it is possible by controlling the rubbing direction in the design of a pixel electrode.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.47-48
• /
• 2006

Carbon nanotubes (CNTs)-doped homogeneously aligned nematic liquid crystal (LC) cells driven by in-plane field were fabricated and their electro-optic characteristics were investigated. Effective cell retardation values in an absence of an electric field between doped and undoped LC were the same each other. In the presence of an electric field, however, measured effective cell retardation value was smaller in the CNT-doped cell than in the undoped cell so that the transmittance was slightly smaller in the CNT-doped cell than in the undoped cell. In addition, the CNT-doped cell exhibited slight increase in driving voltage and decrease in response time compared to the undoped cell. The CNT effects on electro-optic characteristics of the cell were discussed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.647-651
• /
• 2005

We studied the external pressure-stable advanced frnge field switching (FFS) pixel design with 3 slit sructue. In this mode, a patterned pixel slit is partitioned into 3 areas, namely, two edges and a center, where the edge slit angle is larger than the center slit angle. Thus the reverse twist region in the pixel edge is reduced comparing to the conventional FFS mode so that the LC dynamics in this region becomes very stable. And also, when the external pressure is applied to the panel at the high voltage, the disclination lines (DLs) were barely intruded into active area. Therefore, the structure is use for the pen based system such as the tablet personal computer (PC), personal digital asistant (PDA).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.116-119
• /
• 2004

In this paper, we have improved a novel (ECB) mode using tilt angle in the unique condition by hot-plate equipment. The new control of tilt angle for nematic liquid crystal (NLC) with negative and positive dielectric anisotropy on the rubbed homeotropic polyimide (PI) using baking method by Hot-plate equipment was investigated. LC tilt angle decreased with increasing baking temperature and time. Especially, the low LC tilt angle of positive type NLC $({\Delta}n>0)$ on the rubbed homeotropic PI surface by increasing temperature and time was measured. The EO characteristics of the novel ECB mode using control of tilt angle on the homeotropic surface than that of conventional OCB cell can be improved. We suggest that the developed the Novel ECB cell using control of tilt angle on the homeotropic surface is a promising technique for the achievement of a fast response time and a high contrast ratio.