• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.457-467
• /
• 2020

Legumes are one of the largest families of crop plants and are widely consumed and produced for their nutritional and commercial benefits. Mung bean (Vigna radiata L.) is a legume crop that contains various functional compounds ; moreover, it has strong antioxidant properties and is becoming an increasingly important food crop. However, most previous studies on mung beans have focused on their primary metabolites. In this study, we investigated the composition and contents of phenolic compounds, fatty acids, soyasapogenol and tocopherol in mung beans cultivated in different regions and cultivated at different seeding dates. Material analysis was conducted using the following methods: LC-MS/MS, GC-FID and HPLC-ELSD. In total, 57 different samples were analyzed. Thirteen phenolic compounds were detected in mung beans. Of these, vitexin and isovitexin were the most abundant compounds, accounting for approximately 99% of phenolic compounds. The difference in phenol compounds according to the seeding dates of mung bean was not statistically significant. The total fatty acid content in beans was the highest in Pyeongchang. Significant differences in total fatty acid content were found according to the cultivation regions. Crops grown in Sohyeon and Dahyeon showed the highest soyasapogenol B content in the Suwon region, and these were the lowest in Jeonju. The total tocopherol content of beans cultivated in Dahyeon and Sohyeon was the lowest and highest in Pyeongchang. Soyasapogenol B and total tocopherol content were not significantly different according to seeding dates. This study was conducted to obtain basic data for the cultivation of mung beans with a high content of various functional materials in terms of regional specialization and optimal seeding time.

• Analytical Science and Technology
• /
• v.18 no.4
• /
• pp.271-277
• /
• 2005

Urea in blood has been measured as an effective marker for diagnosis of renal function. Urea which is e end-product of nitrogen containing metabolites such as proteins is filtered through glomeruli of kidneys and then excreted as urine. If the renal function is deteriorated, the urea concentration in blood will be increased, from which the healthiness of renal function is judged. In order to improve the confidence of diagnosis results, the results must keep traceability chain to certified reference materials, which was certified by primary reference method. In this study, we proposed isotope dilution-liquid chromatography/mass spectrometry (ID-LC/MS) as a candidate primary method, in which $15^N_2$-urea is used as an internal reference material. The developed method is highly accurate in principle and is convenient as it does not require cumbersome derivatization. 0.1 mmol/L ammonium chloride was selected as a mobile phase for HPLC because it provided low interference in MS analysis of relatively low molecular weighted urea. HPLC and MS were connected with an electrospray ionization (ESI) interface of positive mode, which provided high sensitivity and reproducibility. The developed method was validated with internationally recognized reference materials, and we have obtained satisfactory results in an international ring trial. The expanded uncertainty calculated according to ISO guide was 1.8% at 95% confidence interval. The developed method is being used as a primary reference measurement method such as for certification of serum certified reference materials (CRMs).

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1358-1364
• /
• 2000

A mixed culture of bacteriocin-producing lactic acid bacteria and yeast was used to prepare unique fermented fruit and vegetable beverage which contains bacteriocin. Fruit and vegetable broth fermented by Lactococcus lactis 11454 showed inhibitory activity against foodborne pathogens such as Listeria monocytogens and Staphylococcus aureus, and Streptococcus mutans which is a major causative agent for dental caries. Bacteriocin was detected at the end of fermentation of fruit and vegetables and its antimicrobial activity was stable for 5 weeks during storage at $4^{\circ}C$. These results suggest that the presence of bacteriocin in beverages during fermentation and storage will provide a safeguard against foodborne pathogens and spoilage bacteria. To improve flavor of the fermented broth, post-fermentation of the fermented broth was carried out at $4^{\circ}C$ by using yeast isolated from raw material mixture. Total acidity of the post-fermented broth was slightly decreased, but significant increase in the concentration of succinic acid was observed in the post-fermented broth. It was also observed that bitter and disagreeable taste compounds such as phthalates were decreased, and mild acidic and fruity flavor esters and alcohols were increased by the post-fermentation of the fermented broth with yeast.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.1
• /
• pp.71-77
• /
• 2010

The water fern Azolla belongs to the Azollaceae and forms a symbiotic association with a $N_2$-fixing cyanobacterium, referred to as Anabaena azollae, and this association has currently been demonstrated to have potential as a nitrogen source for rice production. Because of that, Azolla fern has been used not only as organic manure in southern China and northern Vietnam for a long time but also as food for animate creatures in the underwater and decontaminant in the water. However, the phenolic compounds and active materials of Azolla have not been examined in detail in the past studies. In the present study, anti-oxidant ability test and experiment to find a particular active material of Azolla imbricata and Azolla imbricata fraction (AIF) were performed. In anti-oxidant test such as DPPH test and lipoxygenase inhibition test, the value of test represented high activities compared with authentic sample - green tea and NDGA (nordihydroguaiaretic acid). In MMP-1 test, related to collagen protection and elasticity of skin, its inhibitory effect was measured over 75 %, and the phenolic compounds of AIF related with this activity were confirmed luteolin derivatives by using FT-IR spectroscopy, element analyzer (EA) and Liquid chromatography-MASS spectroscopy.

• Korean Journal of Pharmacognosy
• /
• v.49 no.4
• /
• pp.312-321
• /
• 2018

Recently, consumer demand for functional cosmetics containing natural ingredients has been greatly expanded. To develop the natural cosmetic materials, we selected 3 plants, Chrysanthemum zawadskii Herbich (CZ), Perilla frutescens (L.) Britton var. acuta Kudo (PF), and Rosa multiflora Thunberg (RM) which showed high total flavonoid contents (TFC), total polyphenol contents (TPC), and strong DPPH radical scavenging effect. We determined astragalin, chlorogenic acid, and rosmarinic acid as a marker compound for quantitative analysis of the content of each material and standardization of the quality standards and manufacturing standards through LC/MS analysis. HPLC-DAD was used to simultaneously analyze these marker components of three natural product complexes (Mix) and to validate the analytical method through experiments such as linearity, accuracy and precision. The detection wavelengths were set at 210, 265, and 330 nm. The detected 3 compounds from extract of CZ, PF, RM showed significant linearity ($R^2${\geq_-}$0.9947). The limit of detection (LOD) of chlorogenic acid, astragalin and rosmarinic acid were $8.29{\mu}g/ml$, $2.28{\mu}g/ml$, and $27.00{\mu}g/ml$, respectively. The limit of quantification (LOQ) of chlorogenic acid, astragalin and rosmarinic acid were $25.11{\mu}g/ml$, $6.92{\mu}g/ml$, and $81.83{\mu}g/ml$, respectively. The contents of the three indicators of Mix were 19.82-24.71 mg/g of chlorogenic acid, 43.80-46.02 mg/g of astragalin, and 46.33-48.57 mg/g of rosmarinic acid.

• Applied Chemistry for Engineering
• /
• v.30 no.2
• /
• pp.205-211
• /
• 2019

Over the past several decades, the polymer dispersed liquid crystal (PDLC) has received particular attention as a material for developing smart window due to their electro-optical switchable properties. In this study, PDLC cells were fabricated using acrylate monomers, namely 2-hydroxyethyl acrylate (2-HEA) and ethylene glycol phenyl ether acrylate (EGPA), and the effect of the monomer composition on their electro-optical properties was investigated. The monomer mixture with a low viscosity (~10 cps) was easily filled between indium tin oxide (ITO) glasses by capillary action at room temperature. PDLC cells prepared using the mixture ratio of 1 : 9 (2-HEA : EGPA) did not show a complete opaque state at a 0 V condition but exhibited unstable electro-optical properties under an electric field. As the LC composition increased in the reaction mixture for PDLC cell preparation, the $V_{th}$ (threshold voltage) and $V_{sat}$ (saturation voltage) values as well as contrast ratio (CR) increased. $V_{th}$ and $V_{sat}$ values also increased with the cell gap thickness. PDLC cells with a $20{\mu}m$ cell gap thickness exhibited higher CR than those with 10 and $40{\mu}m$ cell gap thicknesses. Particularly, PDLC cells prepared using the mixture ratio of 7 : 3 (2-HEA : EGPA) showed excellent electro-optical properties such as a low driving voltage and high contrast ratio.

• The Korean Journal of Food And Nutrition
• /
• v.36 no.5
• /
• pp.368-378
• /
• 2023

Changes in contents of free sugars, amino acids, and fatty acids of legumes were analyzed for each phase of in vitro digestion. In addition, contents of resistant starch in raw and digested pulses were compared. Soybeans, kidney beans, cowpeas, and chickpeas were analyzed. An in vitro digestion model was used to analyze contents of nutrients using LC-MS and GC-MS. Stachyose in kidneybean, cowpea, and chickpea increased as the digestion phase progressed. In four types of legumes, raffinose slightly decreased or showed no significant difference between the Oral phase and the BBMV phase. Content of glucose, a monosaccharide, increased during the BBMV phase. During the digestion phase, levels of free amino acids and free fatty acids also increased. Content of resistant starch was reduced compared to that in the raw material. It was 0.01g/100 g food in soybean, 1.06 g/100 g food in red kidney bean, 0.77g/ 100g food in cowpea, and 0.76 g/100 g food in chickpea. It was confirmed that nutrients in the in vitro digestion model were liberated at each digestion phase with changes in the content of resistant starch. These results are expected to be used as fundamental data for obtaining bioavailability of nutrients.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.2
• /
• pp.149-164
• /
• 2024

This study compared the solubility, water absorption, dimensional stability, release of various ions (hydroxyl, calcium, sulfur, strontium, and silicon), and cytotoxicity of light-cured resin-modified pulp-capping materials. Resin-modified calcium hydroxide (Ultra-blend^TM plus, UBP), light-cured resin-modified calcium silicate (TheraCal LC^TM, TLC), and dual-cure resin-modified calcium silicate (TheraCal PT^TM, TPT) were used. Each material was polymerized; solubility, 24-hour water absorption, and 30- day dimensional stability experiments were conducted to test its physical properties. Solubility was assessed according to the ISO 6876 standard, and 24 hours of water absorption, 30 days of dimensional stability were assessed by referring to the previous protocol respectively. Eluates at 3 and 24 hours and on 7, 14, and 28 days were analyzed according to the ISO 10993-12 standard. And the pH, Ion-releasing ability, cell proliferation rate, and cell viability were assessed using the eluates to evaluate biochemical characteristics. pH was measured with a pH meter and Ion-releasing ability was assessed using inductively coupled plasma atomic emission spectrometry (ICP-AES). Cell proliferation rate and cell viability were assessed using human dental pulp cells (hDPCs). The former was assessed by an absorbance assay using the CCK-8 solution, and the latter was assessed by Live and Dead staining. TPT exhibited lower solubility and water absorption than TLC. UBP and TPT demonstrated higher stability than TLC. The release of sulfur, strontium, calcium, and hydroxyl ions was higher for TLC and TPT than for UBP. The 28-day release of hydroxyl and silicon ions was similar for TLC and TPT. TLC alone exhibited a lower cell proliferation rate compared to the control group at a dilution ratio of 1 : 2 in cell proliferation and dead cells from Live and Dead assay evaluation. Thus, when using light-cure resin-modified pulp-capping materials, calcium silicate-based materials can be considered alternatives to calcium hydroxide-based materials. Moreover, when comparing physical and biochemical properties, TPT could be prioritized over TLC as the first choice.

• Journal of dental hygiene science
• /
• v.13 no.2
• /
• pp.165-173
• /
• 2013

The purpose of this study was to evaluate the surface change after 15% carbamide peroxide home bleaching to various restorative materials (composite resin [CR], resin modified glass ionomer [RMGI] and glass ionomer [GI]) and to observe the effect of surface condition of the materials on re-staining. Three esthetic restorative materials (Filtek Z250, 3M, USA; Fuji II LC, GC, Japan; Fuji II, GC, Japan) were used in this study. Twenty specimens per material group were made and divided into two groups (bleached and control). The specimens were immersed in coffee after applying bleaching agent. The color change and surface roughness were measured before and after bleaching and after immersion in coffee. The data were analyzed with SPSS 18.0. The results were as follows: 1. The color of all experiment groups was significantly changed after bleaching (p<0.05). RMGI was the greatest value of ${\Delta}E^*$ and ${\Delta}L^*$. GI and CR groups were in ordering (p<0.05). The ${\Delta}a^*$ value was decreased GI, RMGI and CR. RMGI was only significantly decreased in ${\Delta}b^*$ value (p<0.05). 2. The surface roughness before and after bleaching was significantly different on CR, RMGI and GI (p<0.05). 3. After staining with coffee, the value of ${\Delta}E^*$ was increased in GI, RMGI and CR, furthermore GI and RMGI showed significant difference in the bleaching groups (p<0.05). The ${\Delta}L^*$ value of GI and RMGI was significantly decreased. 4. The change of surface roughness after staining was not significantly different in all groups (p>0.05). The maintenance of color stability in esthetic restorations is one of the most important properties. Tooth whitening is for the aesthetic. Therefore, dental professionals should notice to patients about re-staining after tooth whitening. They should give an instruction that how to prevent and which kinds of agents could be stained.

• Journal of Food Hygiene and Safety
• /
• v.35 no.2
• /
• pp.136-145
• /
• 2020

This study was conducted to evaluate pesticide residues and foreign metallic matter on a total of 104 powdered agricultural products in Incheon. Residue testing for 373 pesticides was conducted by GC-MS/MS, LC-MS/MS, GC-ECD, GC-NPD and HPLC-UVD. Foreign metallic matter was detected by magnetic rod. As a result pesticide testing, 7 of the 104 products were found to be within the MRL of the pesticides. The detected pesticides were chlorpyrifos, etofenprox, fenoxanil, malathion, permethrin, tebuconazole and tetraconazole. As for foreign metallic matter, 16 samples were above the allowable limits set by Korean regulations. Therefore, the inspection of residual pesticides in raw material, and the removal of foreign metallic matter will require further stringent attention for the safety of powdered agricultural products.