• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.180-182
• /
• 1996

In this study, we have investigated the characteristics of the response time and the viewing angle on twisted nematic (TN)-liquid crystal display (LCD) and amorphous (a) TN-LCD without rubbing. To measure the transmission-voltage, response time, and viewing angle characteristics, we prepared three kinds of LC cells and then studied the surface liquid crystal alignment effect. We studied that the response time on a-TN-LCD is fast compared to the TN-LCD. We suggest that the weak anchoring strength is attributed to the fast response time on a-TN-LCD. Also, we obtained the uniform viewing angle characteristics on a-TN-LCD. From these results, we consider that the liquid crystal alignment on LCD device are very important factor for electro-optical characteristics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.4
• /
• pp.336-340
• /
• 2001

We have investigated the generation of pretilt angle and alignment stability for a nematic liquid crystal (NLC) with obliquely polarized UV exposure on the three kinds of photo-polymer. High pretilt angle of the NLC was obtained by polarized UV exposure on a PM4Ch surface for 1 min. But, the low pretilt angle of he NLC on a PVCi surface was observed. The pretilt angle generated is attributed ot the photosensitivity by the long side chaining of photo-polymer. Also, a good thermal stability of the three kinds of photo-polymer were obtained by thermogravimetric analysis (TGA) measurement until 300$^{\circ}C$. Finally, the good LC aligning capabilities using the photodimerization method were observed by annealing-treatment until 150$^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1028-1032
• /
• 2005

Liquid crystal (LC) alignment using a photoalignment method by irradiation of polarized ultraviolet (UV) on an alignment layer has been investigated. Photoalignment method exhibits weaker anchoring energy than rubbing method so that we have studied electro-optic characteristics of fringe-field switching (FFS) mode with alignment layers using the photo and rubbing alignment methods. The cell using photo alignment layer shows lower threshold and operation voltage than those using rubbed alignment layer. Also, the former method shows higher transmittance than that of the latter.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.2
• /
• pp.169-172
• /
• 2002

The voltage holding ratio(VHR) and the residual DC property in the in-plane switching (IPS) cells on a polyimide surface was studied. Several IPS cells which have different concentrations of cyano liquid crystals (LCs) were fabricated. We found that the VHR of the IPS cell was decreased with increasing concentration of cyano LCs. Also, the VHR of the IPS cell was increased with increasing specific resistivity of fluorine LCs. The residual DC voltage of the IPS cell by capacitance-voltage (C-V) hysteresis method was decreased with increasing concentration of cyano LCs. The residual DC property of the IPS cell on the rubbed PI surface can be improved by high polarity of cyano LC.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.267-270
• /
• 1998

In this study, we investigated the generation of pretilt angle for nematic liquid crystal (NLC) in a cell with oblique non-polarized ultraviolet (UV) light irradiation on polyimide (PI) surfaces. It was found that the monodomain alignment of the NLC is obtained in a cell with an angle of incidence of 70∼85$^{\circ}$on PI surface. We consider that the monodomain alignment of NLC is attributed to anisotropic dispersion force effect due to Photo-depolymerization of polymer on PI surfaces. Also, pretilt angle of NLC is generated about 3$^{\circ}$ with an angle of incidence of 70∼75$^{\circ}$. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecules and the polymer surfaces.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.271-274
• /
• 1998

In this paper, the monodomain alignment of nematic liquid crystal(NLC) in the cell fabricated by one side transcription alignment method on PI surface with side chain were investigated. The LC alignment produced by the transcription alignment method is attributable to a memory effect of the NLC on Pl surfaces. We observed that the pretilt angle of NLC is generated about 3.6$^{\circ}$ in a cell with one side transcription alignment on PI surface. Also, the electro-optical(EO) performance of TN-LCD with one side transcription alignment method on PI surface will be discussed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.3
• /
• pp.219-223
• /
• 2003

The electro-optical (EO) performances of a multidomain verticial-alignment (MYA) cell on a homeotropic photopolymer have been investigated. In the absence of an electric field, the WVA cell achieved black state as LC alignment is homeotropic An electric field created by interdigitated electrodes and rib made after photolithograph using the photopolymer on both substrates causes a director deformation of a multidomain type. Good voltage transmittance curves for a MVA cell on the homeotropic photopolymer were observed. Also, the stable response time of MYA cell on the homeotropic photopolymer can be achieved.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.6
• /
• pp.301-304
• /
• 2006

We studied the nematic liquid crystal (NLC) aligning capabilities using the new alignment material of the SiC (Silicon Carbide) thin film. The SiC thin film exhibits good chemical and thermal stability. The good thermal and chemical stability make SiC an attractive candidate for electronic applications. A vertical alignment of nematic liquid crystal by atomic beam exposure on the SiC thin film surface was achieved. The about $87^{\circ}$ of stable pretilt angle was achieved at the range from $30^{\circ}\;to\;45^{\circ}$ of incident angle. Consequently, the vertical alignment effect of liquid crystal electro-optical characteristic by the atomic beam alignment method on the SiC thin film layer can be achieved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.109-112
• /
• 1998

In this paper, we studied on electro-optical (EO) characteristics of photo-aligned twisted nematic (TN)-LCD. We obtained that uniform LC alignment in TN-LCD with linearly polarized ultraviolet (LPUV) light irradiation on polyimide (PI) surface increases according to increasing irradiation time for 10 to 60 min. The voltage-transmittance and response time characteristics of photo-aligned TN-LCD with UV light irradiation time of 60 min were almost same in comparison with conventional TN-LCD were observed. From the results, we suggest that photo-aligned TN-LCD with LPUV light irradiation on PI surface is useful in applying LCD as for rubbing-free treatment method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.533-536
• /
• 1999

In this study, we investigated pretilt angle generation and liquid crystal alignment by UV light irradiation during imidization of polyimide. Generated pretilt angle of NLC by using in-situ UV photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, generated pretilt angle of NLC tends to increase by annealing. We found that in-situ UV photo-alignment method has higher thermal stability of LC alignment, but it has a disadvantage to control pretilt angle.