• Journal of Naturopathy
• /
• v.10 no.2
• /
• pp.108-113
• /
• 2021

Background: Results on the action of antioxidants in extracts of Equisetum hyemale stems and roots have already been reported, but the antioxidant properties have not been analyzed. Purpose: This study was to determine the molecular structure of antioxidants in substances extracted from E. hyemale stems and roots. Methods: Component analysis was analyzed by HPLC and LC-MS after extraction with hot water and ethyl alcohol. Results: The HPLC chromatogram of stem and root extracts showed four significant peaks at a wavelength of 205 nm. Peak 1 at 280 nm is a typical simple phenolic type, and both peaks 2-4 near 280 nm and 370 nm are typical flavonoid glycosides. As for the antioxidant level of the extract by HPLC analysis, the sum of the peaks at 740 nm was the highest at 3,669 mAU in the 100% ethanol extract, 3,096 mAU in the 70% ethanol extract, and 2,868 mAU in the hot water extract. As a result of LC-MS analysis of the antioxidant extract, kaempferol-3-sophoroside-7-glucoside with a molecular weight of 772 da at peak 3, and kaempferol-3-sophoroside-8-glucoside with a molecular weight of 788 and 772 at peak 4 was identified. Conclusions: The above results show that two types of antioxidants were identified in the antioxidant extract of E. hyemale exrtracts. Therefore, the potential as a raw material for functional cosmetics has increased.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.2
• /
• pp.117-125
• /
• 2023

In this study, the anti-inflammatory and anti-oxidative activities were compared for the extracts of non-fermented Ligustrum japonicum fruits (LJF) and fermented counterparts. U se of Latilactobacillus curvatus (L. curvatus) and Weissella minor (W. minor), isolated from the Jeju Chromis notata, as fermented strains led to the extracts of LJF-LC and LJF-WM in this experiment. The yield of each fermented extract (LJF-LC and LJF-WM) was 40.5 ~ 46.0%, higher than 29.5% of non-fermented extract (LJF). As a result of an activity experiment using RAW 264.7 macrophages stimulated by lipopolysaccaride (LPS), it was confirmed that LJF-WM, a fermented extract, has an excellent effect of inhibiting NO production in a concentration-dependent manner without cytotoxicity. Upon the screening of DPPH and ABTS⁺ radical scavenging activities, the fermented LJF-LC and LJF-WM showed comparable to the non-fermented LJF. In the study of cell protection effect using HaCaT keratinocytes damaged by hydrogen peroxide (H₂O₂), the fermented LJF-WM indicated protective effect against oxidative stress. In addition, quantitative analysis of a major constituent salidroside by HPLC indicated about 15.6 mg/g for the LJF-LC and 13.9 mg/g for the LJF-WM, which were higher than that of non-fermented LJF (12.0 mg/g). Based on these results, it was suggested that the fermented extract from L. japonicum fruits could be used as a natural cosmetics material with anti-inflammatory and anti-oxidative effects.

• Journal of Powder Materials
• /
• v.18 no.2
• /
• pp.141-148
• /
• 2011

Carbon material shows relatively high strength at high temperature in vacuum atmosphere and can be easily removed as CO or $CO_2$ gas in oxidation atmosphere. Using these characteristics, we have investigated the applicability of carbon mold for precision casting of high melting point metal such as nickel. Disc shape carbon mold with cylindrical pores was prepared and Ni-base super alloy (CM247LC) was used as casting material. The effects of electroless Nickel plating on wettability and cast parameters such as temperature and pressure on castability were investigated. Furthermore, the proper condition for removal of carbon mold by evaporation in oxidation atmosphere was also examined. The SEM observation of the interface between carbon mold and casting materials (CM247LC), which was infiltrated at temperature up to $1600^{\circ}C$, revealed that there was no particular product at the interface. Carbon mold was effectively eliminated by exposure in oxygen rich atmosphere at $705^{\circ}C$ for 3 hours and oxidation of casting materials was restrained during raising and lowering the temperature by using inert gas. It means that the carbon can be applicable to precision casting as mold material.

• Imaging Science in Dentistry
• /
• v.30 no.4
• /
• pp.243-248
• /
• 2000

Purpose: The aim of this study was to determine the relative radiopacities of cavity lining materials (Resin-modified Glass Ionomer cement, Compomer and Plowable resin) for posterior composite resin restoration. Material & Methods: Resin-modified glass ionomer cement (Fuji II LC, Vitrebond/sup TM/), Compomers (Dyract /sup (R)/ Compoglass, F2,000, Dyract/sup (R)/ flow Compoglass Flow) and Flowable resins (Tetric/sup (R)/ flow, Aeliteflo/sup TM/ Revolution/sup TM/) were used. Five specimens of 5 mm in diameter and 2 mm thick were fabricated with each material. Human molars were horizontally sectioned 2 mm thick to include both enamel and dentin. The radiopacities of enamel, dentin, cavity lining materials, aluminum step wedge were obtainded from conventional radiograph and NIH image program. Results: All the tested lining materials showed levels of radiopacity the same as or greater than that of dentin. All compomer tested (Dyract, Compoglass, F2,000, Dyract flow, Compoglass Flow) and Vitrebond/sup TM/, Tetric/sup (R)/ flow were more radiopaque than enamel. The radiopacities of Fuji II LC and Revolution/sup TM/ were between enamel and dentin and resin-modified glass ionomer cement, Compomer and Tetric/sup (R)/ flow were greater than those of Revolution/sup TM/, Aeliteflo/sup TM/ or dentin. The level of radiopacity of the tested materials was variable; those with low radiopacity should be avoided in class II restorations, where a clear determination of recurrent caries by the examining clinician could be compromised. Conclusion: Clinician should be able to distinguish these cavity lining materials radiographically from recurrent decay, voids, gaps, or other defects that lead to clinical failure. Utilization of materials ranked more radiopaque than enamel would enable clinicians to distinguish the lining material from tooth structure.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.4
• /
• pp.443-451
• /
• 2023

The purpose of this study was to evaluate whether the newly introduced calcium silicate-based materials with fast-setting properties could be appropriately used as basement materials in indirect pulp treatment (IPT). This was performed by quantifying the durability of adhesion between the material and composite resin, measured by the shear bond strength (SBS). Five calcium silicate-based materials, TheraCal LC^® (TLC), TheraCal PT^® (TPT), TheraBase^® (TB), Well-Root^TM PT (WPT), and Endocem^® MTA (EMTA), as well as two glass ionomer-based materials, Fuji II and Fuji II LC, were included. Specimens containing these materials were manufactured and bonded to composite resin with a universal adhesive applied in self-etch mode. The SBS values and failure modes were recorded, and the mean SBSs of the materials were compared. Both TPT and TB exhibited SBS values that were similar to TLC, while both WPT and EMTA appeared to have statistically lower SBS values. Mixed failure was commonly observed in TLC and TPT, while all WPT and EMTA samples showed cohesive failure. In comparison with TLC and TPT, more samples with cohesive failure were observed in TB, implying that this material forms a stronger bond with composite resin. Together with the ability of TB to chemically bind to dentin due to its 10-methacryloyloxydecyl dihydrogen phosphate component, TB seems to be a promising material for IPT within the limitations of this in vitro study.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.188-192
• /
• 2003

A multilayer two-stage LC bandpass filter using low-temperature cofired-ceramic (LTCC) is proposed in this paper. The proposed bandpass filter is composed of two ceramic substrates with different dielectric constant instead of single ceramic material from top to bottom layer. The bandpass filter size is $2.0 mm{\times}1.2 mm{\times}0.8 mm$. Positioning of attenuation polefrequency, importance parameter for a performance of filter, is discussed using even-odd mode analysis by tuned capacitance of coupling capacitor and those results is implemented to LTCC filter circuit. Measured filter performances show that the insertion losses are -4.5dB, -4.1dB at 2.45GHz, 2.75GHz and the return losses are -8.5dB, 8.7dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.125-128
• /
• 1998

The electro-optical properties of PDLCs ( Polymer Dispersed Liquid Crystals ) that have been interested for applications to projection display devices lately are significantly improved. For this improvement, we optimized not only the material parameters of liquid crystal and polymer but also the process conditions. Using TL series liquid crystals and polymer PN393 provided from Merck, we obtained the optimized process conditions such as cell gap, LC concentration, curing temperature and curing time. Under these conditions, we have achieved PDLC cells of threshold voltage 2.6V. contrast ratio 260 and negligible hysteresis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1068-1071
• /
• 2007

When a dielectric layer, in-cell retarder (ICR) is formed between electrode and LC layer to get a single gap transflective fringe-field switching (FFS) display, the operating voltage ($V_{op}$) is highly increased due to the thickness of dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the Vop and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.835-838
• /
• 2000

A new photo-alignment material, copoly (PM4Ch-ChMA), copoly (poly (4-methacryloyloxy) chalcone-cholesterol methacrylate) was synthesized and the electro-optical (EO) characteristics for the photo-aligned vertical-aligned (VA)-LC display (LCD) were studied. Good voltage-transmittance (V-T) and response time characteristics for the photo-aligned VA-LCD with polarized UV exposure on the copolymer-1 (2%) surfaces for 1 min. were observed. EO performance for the photo-aligned VA-LCD decreased with increasing UV exposure time on a copolymer surface. Also, excellent V-T and response time characteristics for the photo-aligned VA-LCD with UV exposure on copolymer-2 and copolymer-3 surfaces for 3min. can be achieved.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.435-436
• /
• 2007

In general, Single gap transflective FFS display has an in-cell retarder (ICR) between reflective electrode and liquid crystal (LC) layer. Therefore, Operating voltage is highly increased due to this thick dielectric material. But, we also knew the phenomenon that the increasing rate of Vop is different whether the 1st common electrode was composed of plate type or slit type. In this paper, the common electrode in transmissive part was composed of slit type which had less steepness effect of the V op and in reflective part was composed of plate type. The rubbing angle of reflective part can be adjusted properly to match the voltage dependent transmittance and reflectance.