• Electrical & Electronic Materials
• /
• v.10 no.9
• /
• pp.876-880
• /
• 1997

In this paper we investigated the transcription of liquid crystal (LC) alignment method by using memory effect of nematic(N) LCon polymide(PI) surface with side chain as for non-rubbing alignment techniques. That the monodomain alignment of aligned NLC is observed by microscope textures in the cells on PI surface with side chain. We obtained that the pretilt angle of NLC are generated about 3.7$^{\circ}$on PI surface. We suggest that the LC alignment by using transcription alingnment method is attributed to memory effect of NLC on PI surface.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.259-262
• /
• 1998

The liquid crystal (LC) alignment and pretilt angle generation using photo-alignment method were investigated in this study. We obtained that the monodomain alignment of nematic(N) LC increases with increasing irradiation time in a cell with linearly polarized ultraviolet (LPUV) light irradiation on polyimide (Pl) surfaces. We consider that the monodomain alignment is able to be anisotropic dispersion force due to photo-depolymerization of polymer with LPUV light irradiation on Pl surface. Also, we observed that the uniform alignment of NLC is obtained in a cell with normally LPUV light irradiated on Pl surface at 30 min. and then oblique LPUV is secondly irradiated on Pl surfaces rotated by 90$^{\circ}$. The pretilt angle of NLC is generated about 1.5$^{\circ}$ with oblique angle 60$^{\circ}$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.776-779
• /
• 2006

The alignment of liquid crystal (LC) is one of the key issues of liquid crystal display (LCD) technologies. In this study, we aligned polyimide (as the LC alignment layer) by ALT plasma beam and to realize the stability and characteristics of this technology. The characteristics such as anchoring energy, pre-tilt angle, voltage holding ratio(VHR) and residual direct current(Rdc) were discussed. Besides, we applied it to the in plane switch (IPS) mode 23" WXGA real panel, the performance parameters and electrical properties were measured and compared with those of rubbing alignment. From the result, we demonstrated a successful LC alignment treatment process in real panel by ALT plasma beam.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1762-1764
• /
• 1999

We investigated the annealing effect on generating pretilt angle and aligning liquid crystal (LC) using the photo-depolymerization reaction in this study. In case of rubbing polyimide (PI) surface with the side chain, pretilt angle tends to increase with increasing the annealing time. It is considered because the steric interaction is increased by annealing which cause the side chain to come back to original position. For obliquely irradiating ultraviolet (UV) light on PI surface, pretilt angle shows to $0^{\circ}$ and is increased by annealing. The pretilt angle in rubbed PI surface is much higher than in photo-aligned PI surface. It is attributed to the steric interaction and the number of LC molecular arrangement on azimuthal direction. In addition. in case of obliquely irradiating UV light on PI surface. it showed LC alignment to increase by annealing. It can be regarded due to the fact that the re-alignment of LC molecule is improved to residual polymer direction by annealing.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.182-185
• /
• 2001

A photoalignment material based N-(phenyl)maileimide were synthesized and the liquid crystal (LC) aligning capabilities on the photopolymer layer were studied. A goof LC alignment with UV exposure on the PM15CA(N-(phenyl)maileimide with 5-carbon chain cinnamoyl group) can be obtained However, the LC alignment defects were observed on the PM13CA (N-(phenyl)maileimide with 3-carbon cam cinnamoyl group) and PMIF (N-(Phenyl)maileimide including fluoro cinnamoyl group). Also, the good LC alignment with UV exposure on the PM15CA surface was observed at until $150^{\circ}C$ of annealing temperature. The LC aliging ability on the photopolymer layer based N-(phenyl)maleimide depends on the side chin length of photopolymer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.301-301
• /
• 2008

Ion beam (IB)-induced alignment of inorganic materials has been investigated intensively as it provides controllability in a nonstop process for producing high-resolution displays[1][2]. LC orientation via ion-beam (IB) irradiation on the nitrogen doped diamond like carbon (NDLC) thin film deposited by physical deposition method-sputtering was embodied. The NDLC thin film that was deposited by sputter showed uniform LC alignment at the 1200eV of the ion beam intensity. The pretilt angle of LC on NDLC thin films was measured with various IB exposure time and angle. The maximum pretilt angle were showed with IB irradiation angle of $45^{\circ}$ and exposure time of 62.5 sec, respectively. To show NDLC thin film stability in high temperature, thermal stability test was proceeded. The uppermost of the thermal stability of NDLC thin film was $200^{\circ}C$. In this investigation, the electro-optical (EO) characteristics of LC on NDLC thin film were measured.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.145-148
• /
• 2012

The effects of the linearly polarized UV (LPUV) irradiation and thermal treatment of a photo-degradable polyimide (CBDA-ODA) alignment layer (AL) on its AL properties, liquid crystal (LC) alignment, and LCD characteristics have been investigated. The best quality of LC photo-alignment have been induced by the LPUV-irradiation with much (about 5~10 times) less dosage than that generating the maximum anisotropy of the AL. A thermal treatment of the LPUV-irradiated AL has effectively removed the undesirable, low-M.W. fragments of the AL generated during the photo-decomposition and increased the stability of the AL, which has resulted in improvement of the LC alignment and the LCD property.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1812-1814
• /
• 1999

The effects of polarity of the polymer on transcription-aligned twisted nematic (TN)-liquid crystal display (LCD) on various the polyimide (PI) surfaces were investigated. The monodomain alignment of nematic (N)LC is obtained in cells fabricated by transcription alignment method on PI surface with medium polarity. The LC alignment using transcription alignment method is attributed to polarity of the polymer. The threshold voltage of transcription-aligned TN-LCD decreases with increasing the polarity of the polymer on three kinds of the PI surfaces. The threshold voltage of transcription-aligned TN-LCD on PI surface with high polarity is almost the same compared to rubbing-aligned TN-LCD. The response time of transcription-aligned TN-LCD decreases with the increasing the polarity of the polymer on all PI surfaces. The decay time of transcription-aligned TN-LCD is slow compared with the rubbing-aligned TN-LCD.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1167-1168
• /
• 2004

Polarized ultraviolet irradiation techniques have been developed recently to produce alignment of liquid crystals (LC). Because of the excellent thermal stability and the alignment ablility of polyimides, polyimides has attracted considerable research interest for the photoinduced alignment layer. Hasegawa and Taira confirmed homogeneous alignment of LC by the decompostion of a polyimide induced by lineraly ultra-violet polarized light. It was reported that ultraviolet visible absorption spectra of a polyimide alignment film showed a remarkable change upon irradiation. In this study, we synthesized phthalic polyimide and a naphthalenic polyimide in order to investigate the effect of the polyimide structure. Some difference in terms of the photo-induced molecular orientaion of liquid crystals were observed with the polyimide structure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.177-180
• /
• 2000

In this study, we investigated the pretilt angle generation and liquid crystal (LC) alignment by ultraviolet (UV) exposure during imidization of polyimide on the polymer with side chain. The generated pretilt angle of nematic (N) LC using in-situ photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, the generated pretilt angle of NLC tends to increase by annealing.