• Journal of Aquaculture
• /
• v.17 no.2
• /
• pp.122-127
• /
• 2004

On protein equivalence base, fishmeal (FM) was replaced by lysine cell mass (LCM) in selected different diets in Korean rockfish, Sebastes schlegeli (Hilgendorf) Eight experimental diets were formulated to contain 100% FM (LC $M_{0}$), 90% FM+10% LCM (LC $M_{10}$),80% FM+20% LCM (LC $M_{20}$), 70% FM+30% LCM (LC $M_{30}$), 60% FM+40% LCM (LC $M_{40}$ ), 70% FH+30% LCM+lysine (LC $M_{+Lys}$), 60% FM+40% LCM+lysine (LC $M_{40+Lys}$), and 50% FM+50% LCM+lysine (LC $M_{50+Lys}$). Experimental individuals of the fish (12.6 g) were randomly fed on one of the experimental diets. After 6 weeks of feeding trial, weight gain (WG) and feed efficiency (FE) of fish fed LC $M_{0}$ diet was significantly (P〈0.05) higher than those of fish fed LC $M_{20}$, LC $M_{30}$, LC $M_{40}$ , LC $M_{30+Lys}$, LC $M_{40+Lys}$, and LC $M_{50+Lys}$ diets, however, there was no significant difference in WG of fish fed LC $M_{0}$ and LC $M_{10}$ diets. Supplementation of lysine has no effect on WG. There was no significant difference in condition factor (CF) of fish fed LC $M_{0}$, LC $M_{10}$ and LC $M_{20}$ diets. Hemoglobin (Hb) of fish fed LC $M_{0}$, LC $M_{10}$, LC $M_{20}$, LC $M_{30}$, LC $M_{40}$ , LC $M_{30+Lys}$, and LC $M_{40+Lys}$, diets were not significantly different from each other. No significant differences were observed in hematocrit (PCV) and hepatosomatic index (HSI) among all dietary treatments. Apparent digestibility of dry matter (ADM) and protein (ADP) of diets significantly decreased with increase in dietary LCM level, though there was no difference in ADM and ADP between LC $M_{0}$ and LC $M_{10}$. These results indicate that LCM could replace up to 10% of fishmeal in Korean rockfish diets.ish diets.iets.ish diets.s.ish diets.

• Computers and Concrete
• /
• v.29 no.4
• /
• pp.263-278
• /
• 2022

Limestone calcined clay cement (LC³) is a low carbon alternative to conventional cement. Literature shows that using limestone and calcined clay in LC³ increases the thermal degradation of LC³ pastes and can increase the magnitude of fire risk in LC³ concrete structures. Higher thermal degradation of LC³ paste prompts this study toward understanding the fire performance of LC³ concrete and the associated magnitude of fire risk. For fire performance, concrete prepared using ordinary Portland cement (OPC), pozzolanic Portland cement (PPC) and LC³ were exposed to 16 scenarios of different elevated temperatures (400℃, 600℃, 800℃, and 1000℃) for different durations (0.5 h, 1 h, 2 h, and 4 h). After exposure to elevated temperatures, mass loss, residual ultrasonic pulse velocity (rUPV) and residual compressive strength (rCS) were measured as the residual properties of concrete. XRD (X-ray diffraction), TGA (thermogravimetric analysis) and three-factor ANOVA (analysis of variance) are also used to compare the fire performance of LC³ with OPC and PPC. Monte Carlo simulation has been used to assess the magnitude of fire risk in LC³ structures and devise recommendations for the robust application of LC³. Results show that LC³ concrete has weaker fire performance, with average rCS being 11.06% and 1.73% lower than OPC and PPC concrete. Analysis of 106 fire scenarios, in Indian context, shows lower rCS and higher failure probability for LC³ (95.05%, 2.22%) than OPC (98.16%, 0.22%) and PPC (96.48%, 1.14%). For robust application, either LC³ can be restricted to residential and educational structures (failure probability <0.5%), or LC³ can have reserve strength (factor of safety >1.08).

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.284-287
• /
• 2017

This paper introduces liquid crystal (LC) alignment and its electro-optical properties in the LC cells with silver nanowire (AgNW) networks. The AgNW network was used as an electrode of LC cell as a substitute for an indium-tin-oxide (ITO) film. LC alignment characteristics in the LC cell using AgNW networks, which have two different sheet resistances of $60{\Omega}/m^2$ and $80{\Omega}/m^2$, were observed. The LC alignment characteristics including pretilt angle, LC alignment state, and thermal stability are similar irrespective of sheet resistance of AgNW network. However, twisted-nematic (TN)-LC cell normally operated when using AgNW network with sheet resistance of $80{\Omega}/m^2$. Electrooptical properties of TN-LC cell exhibited competitive performance compared to those of TN-LC cell based on conventional ITO electrode, which allow new approaches to replace conventional ITO electrode in display technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.43-50
• /
• 2001

The IP routing uses the longest-matching prefix to determine the destination. Fast lookup should be required for the high speed routing. We propose a modified LC-trie, called multiple LC-trie, which is suitable data structure for fast address-lookups in software implementation. To reduce the number of memory accesses, our scheme analyzes the distribution of IP address access pattern, and constructs multiple LC:-tries for frequently accessed IP addresses. Our experimental results show that our scheme can perform faster than the original LC-trie schemes.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.199-206
• /
• 2012

This study was conducted in a glasshouse to examine the possibility of producing tomato plug seedlings in a newly-developed inert phenolic foam medium. Plug seedlings of 'Madison' tomato were grown in four pellet type media, Grodan rockwool, UR rockwool, phenolic foam LC, and phenolic foam LC-lite. Seed germination was checked for 7 days. Seedling growth was measured at 19 days after sowing. The greatest germination was obtained in the phenolic foam LC and phenolic foam LC-lite. Plant height, hypocotyl length, leaf area, dry weight, and fresh weight were significantly greater in the rockwool medium than those in the other media. However, the T/R ratio and stem diameter were the greatest in the phenolic foam LC than those in the other media. The total porosity and container capacity of the phenolic foam LC was higher than in the other media. The air space (%) was lowest in the phenolic foam LC. Overall, the phenolic foam LC and phenolic foam LC-lite produced seedlings with similar growth as the rockwool. These results suggested that both phenolic foam LC and phenolic foam LC-lite have potential to be used in production of plug seedlings of 'Madison' tomato.

• Korean Journal of Remote Sensing
• /
• v.35 no.1
• /
• pp.83-92
• /
• 2019

Land cover (LC) is an important factor in socioeconomic and environmental studies. According to various studies, a number of LC maps, including global land cover (GLC) datasets, are made using polar orbit satellite data. Due to the insufficiencies of reference datasets in Northeast Asia, several LC maps display discrepancies in that region. In this paper, we performed a feasibility assessment of LC mapping using Geostationary Ocean Color Imager (GOCI) data over Northeast Asia. To produce the LC map, the GOCI normalized difference vegetation index (NDVI) was used as an input dataset and a level-2 LC map of South Korea was used as a reference dataset to evaluate the LC map. In this paper, 7 LC types(urban, croplands, forest, grasslands, wetlands, barren, and water) were defined to reflect Northeast Asian LC. The LC map was produced via principal component analysis (PCA) with K-means clustering, and a sensitivity analysis was performed. The overall accuracy was calculated to be 77.94%. Furthermore, to assess the accuracy of the LC map not only in South Korea but also in Northeast Asia, 6 GLC datasets (IGBP, UMD, GLC2000, GlobCover2009, MCD12Q1, GlobeLand30) were used as comparison datasets. The accuracy scores for the 6 GLC datasets were calculated to be 59.41%, 56.82%, 60.97%, 51.71%, 70.24%, and 72.80%, respectively. Therefore, the first attempt to produce the LC map using geostationary satellite data is considered to be acceptable.

• Journal of Industrial Technology
• /
• v.30 no.B
• /
• pp.119-123
• /
• 2010

LC-3 is an educational microprocessor for processor logic design, instruction execution fundamentals, and assembly language programming. This paper presents an IDE software, LIDE (LC-3 Integrated Development Environment), which integrates assembly program editor, LC-3 assembler, and LC-3 simulator.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.156-158
• /
• 2009

New liquid crystal (LC) host mixtures and reactive mesogens (RMs) designed for the Polymer Sustainable Vertically Aligned (PS-VA) mode have been developed. The novel combination of LC host mixture with RMs enables to show superior LC display performance with high reliability and to contribute for the robust LC panel production process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.426-429
• /
• 2006

We investigated the electrooptical properties of a carbon nanotube (CNT)-doped nematic liquid crystal (LC) cell. Experimental results reveal that the doped CNTs influence the elastic constant of LC-CNT dispersion. Using a small amount of CNT dopant, the rise time of the LC cell is nearly invariant; the threshold voltage of the cell increases due to the increase in the elastic constant of LC-CNT dispersion. At a higher CNT concentration, the marked increase in the dielectric anisotropy of LC-CNT dispersion markedly decreases the rise time and threshold voltage of the LC cell. The fall time of this cell decreases with increasing CNT concentration due to the increase in elastic constant and the slight increase in viscosity of LC-CNT dispersion. The rise time and the fall time of the LC cell are decreased simultaneously when the LC host is doped with a moderate amount of CNT dopant.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1658-1660
• /
• 2007

We fabricate green device having unique life time characteristics of operating voltage reduction with time, ${\Delta}V_{op}$ <0. A green device needs lower voltage than initial voltage for sustaining constant current as life time goes on. It means there are two possible reasons; one is interface modification between anode and HIL due to oxygen plasma treatment and the other is bulk property modification due to combination of new green host and new green dopant. From these materials and oxygen plasma treatment, we can make white OLED device having the characteristics of low ${\Delta}V_{op}$ increasing.