• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.764-767
• /
• 2001

Because using LB method, result that produce Arachidic acid and Stearic acid LB film and measure the accumulation characteristic and electrical characteristic is as following. Organic monolayers of surface of the water compression each 9 layer's LB film to slide glass and manufactured MIM device compressing molecular film only. Could confirm that accumulation was good seeing as absorption coefficient and SEM picture, AFM picture that prevent manufactured LB films. Formation of domain of coexistence form that prevent LB film is indefinite and distinction of border side was not clear, and could know that roughness appears greatly. Obtained current by applied voltage could know that is proportional almost, though Arachidic acid appeared as bulk of current that happen in equaler certification voltage than Stearic acid is less, this alkyl chain longer Arachidic acid that serving relations special quality is superior know can .

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.202-205
• /
• 1997

In this paper, we synthesized poly(N-(2-4-imidazolyl) ethyl) maleimide-alt-1-octadecene(IMI-O) polymer that can have function group and improvement of mechnical strength and then confirmed the possibility of molecular device made by LB method. Evaluation of LB film have been processed such as the technique of EA, $^{1}$H-NMR, FT-IR. Also, the deposition status was observed by SEM and Metal/Insulator/Metal(MIM) device was fabricated for investigation of electric properties. In our experimental results. The surface pressure for the solid state was investigated to 20~35[dyne/cm] by the $\pi$ -A isotherm and the limiting area was about 40 ~45 ($\AA$$^2$/molecule). The deposition status of LB films was confirmed by SEM. The conductivity of LB film was found to be 10$^{-14}$ ~10$^{-13}$ [S/cm] by I-V characteristic.

• Tribology and Lubricants
• /
• v.19 no.6
• /
• pp.329-334
• /
• 2003

The antiwear properties of amphiphilic monolayers and composite multilayer on silicon surface were investigated using micro­tribometer and Auger Electron Spectroscopy. Langmuir­Blodgett (LB) monolayers from behenic acid, 2,4­heneicosanedione(HD) and its lopper complex((HD)$_2$Cu) were fabricated on silicon surface and the composite multilayer of 5­bilayer of (HD)$_2$Cu was fabricated on the surface of octadecyltrichlorosilane (OTS) self­assembled monolayer (SAM). We observed that LB monolayers and the composite multilayer exhibited a steady and excellent friction response when compared with the OTS SAM. These LB mono and multilayer also showed much higher wear­resistance than the OTS SAM.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.44 no.7
• /
• pp.889-894
• /
• 1995

The structural changes of the merocyanine monolayer LB (Langmuir Blodgett) films were investigated. These changes were compared with the typical changes of the molecular structures of merocyanine solutions. The structural changes of quinoid/benzenoid were attained by exposure to atmosphere gases (HCl gas, N $H_{3}$ gas). The photoisomerization was not observed for the monolayer LB film due to their state of $M_{trans}$. But we could obtain the cis/trans photoisomerization characteristics reversibly, after the films were changed to M $H^{+}$$_{trans}$ structure by exposure to HCl gas. We also found that the cis/trans photoisomerization of the LB monolayer films show the memory characteristics.s.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1297-1299
• /
• 1998

LB layers of L-$\alpha$-DLPC deposited by LB method were deposited onto n-type silicon wafer as Z-type film. Films made up of 8, 16 layers of lipid with long alkyl chain and the thickness of monolayer and multilayers was determined by ellipsometry. It was deposited Ag and Al onto LB layers and silicon wafer for electrode and small electrode exhibit high capacitance and low leakage current. The C-V curves of the MLS capacitor shows very high saturation value of capacitance. And cross-sectional SEM image of MLS capacitor indicated the presence of pore with Al electrode and we found that the Ag is good for electrode metal.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.8
• /
• pp.698-703
• /
• 2009

We report the studies on the structrural properties of Langmuir Blodgett (LB) films fabricated from the copolymer of vinylidenefluoride (VDF) with trifluoroethylene(TrFE). The formation of nanomesas induced by thermal annealing at $135\;^{\circ}C$ for 1 hour was investigated with the atomic force microscope (AFM) and the X-ray diffractometer (XRD). From the result of surface morphology change in 30 monolayer LB film, we find that the annealing treatment on the P(VDF-TrFE) LB film result in the plastic deformation of crystalline polymer. The ${\beta}$ phase crytalline structure in annealed LB film was clearly confirmed from the XRD peak at $19.7^{\circ}$.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.83.2-83.2
• /
• 2017

We report observations of light bridge (LB) jets taken with the New Solar Telescope. Jets as dark, fine threads occurred lined along both edges of a LB of a sunspot, which is a bright and elongated structure that divides a sunspot's umbra into two or more parts. This LB jets are observed for about three hours with $H{\alpha}$ filtergraph at ${\pm}0.4{\AA}$, ${\pm}0.8{\AA}$ from the line center, TiO filtergraph, and near infra-red imaging spectropolarimeter (NIRIS). High resolution $H{\alpha}$ data revealed that subsequent ejection of LB jets were associated with subsequent brightening along the edge of the LB. Also, this subsequent brightening was spatially correlated with both photospheric flow and magnetic field change detected from the TiO and NIRIS data, respectively. Preliminary results of LB jet observation and discussions on its formation mechanism will be presented.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1453-1455
• /
• 1996

The odd-even effect of the alkyl chain length of rubbed polyimide Langmuir-Blodgett (LB) surfaces on the extrapolation length of 5CB has been successfully evaluated for the first time by measuring polar anchoring strength. The extrapolation length of 5CB for rubbed PI-LB surfaces with even-numbers is small compared with odd-numbers for alkyl chain lengths of greater than 7 carbons. The extrapolation length of 5CB on rubbed PI-LB surfaces with odd-numbers increases gradually as the temperature increases but tends to diverge near the clearing temperature (Tc=$35.3^{\circ}C$). The extrapolation length diverges because of rapidly decreasing surface order near $T_c$. We suggest that the polar anchoring strength on rubbed PI-LB surfaces with even-number is strong because of relatively high surface ordering caused by more crystalline surfaces. Finally, we conclude that the odd-even effects of the polar anchoring strength in NLCs are strongly related to the character of the polymer and observed clearly for long alkyl chain lengths.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1569-1571
• /
• 1996

The role of ESR spectroscopy in the characterization of functional LB films is discussed. Optical absorption were performed on LB films of binary mixtures of three kinds of merocyanine dyes where DS and 6Me-DS form J-like aggregates but not DO in single component films. The observed optical absorption spectra of mixed films were markedly dependant on the combination of dyes. We found the formation of J-aggregates in a mixed merocyanine dyes containing a non J-aggregate forming dye DO, in a single component case. In structural studios, ESR is of particular important in the analysis of molecular orientation of LB films. Development of new functional LB films may provide more cases where ESR spectroscopy will clarify the nature of such films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.198-201
• /
• 1994

Stability improvement of fragile LB films was attempted by polyion complexation of monolayers at the air-water interface and crosslinking of the resulting LB films. The spreading polymers were synthesized by radical copolymerization of monoalkyl itaconate with oligoethyleneglycol methyl vinylether, and poly(allylamine) was employed as the subphase polymer. Formation and characteristic of the monolayers were comfirmed by surface pressure-area($\pi$-A) isotherms. The two different polymers formed polyion-complexed monolayer through the formation of carboxylate/ammonium salt at the air-water interface. Y-type deposition occurred on solid substrates, and the transfer ratio was over 0.7. Pores (diameter, 0.1$\mu\textrm{m}$) of a membrane filter could be covered by polyion-complexed 6 layers. Interactions of the polymers with metal ions were investigated of the air-water interface and in the LB films. The structure change and macroscope morphology of the LB films were confirmed by FT-lR and SEM, respective1y.