• 한국동물위생학회지
• /
• 제38권2호
• /
• pp.107-116
• /
• 2015

In this study, we developed a rapid, sensitive and specific reverse-transcriptase loop-mediated isothermal amplification (RT-LAMP) assay for detection of swine influenza viruse (SIV) including major subtypes of swine influenza viruses H1N1, H1N2 and H3N2, and a novel subtype of influenza A virus that accidentally infected in pig population. The RT-LAMP was completed in 40 min at $58^{\circ}C$ and the sensitivity of the RT-LAMP ($1copy/{\mu}L$) was 10-fold higher than conventional reverse transcription-polymerase chain reaction (RT-PCR) ($10copy/{\mu}L$) and the same to real time RT-PCR ($1copy/{\mu}L$). Also, the result of the RT-LAMP can be confirmed without any detection system. Therefore, the RT-LAMP could be a alternative diagnostic method for SIV detection in national SIV monitoring system and clinical diagnostic laboratory in the future.

• 비파괴검사학회지
• /
• 제32권1호
• /
• pp.12-19
• /
• 2012

본 논문에서는 적외선 열화상 기법을 원전 배관에 적용하여 감육결함을 검사하기 위한 시험 조건을 파악하기 위해서, 인공 결함이 가공된 배관 시편과 평판 시편을 이용하여 적외선 열화상 시험을 수행하였다. 시험에는 할로겐램프를 사용하여 시편을 가열하였으며, 램프의 출력과 시편과 램프의 거리를 변수로 실험을 수행하였다. 시험 결과 시편과 램프의 거리가 1~2 m 이고 램프의 출력이 정격출력의 60 % 이상일 때, 적외선 열화상 기법은 1회 촬영으로 최소한 500 mm 범위 내에 존재하는 원주방향 폭이 $2{\Theta}=90^{\circ}$이고 깊이와 길이가 각각 d/t=0.5와 $L/D_o=0.25$인 배관내 인공 감육 결함들을 검출하였다. 평판 시편과 배관 시편에서 시편과 램프의 거리에 관계없이 램프 출력이 높을수록 결함에 대한 이미지가 선명하였다. 평판 시편과 배관 시편에서 적외선 열화상 방법의 결함 검출 능력은 유사하지만, 최적의 시험 조건은 시편에 따라 다르게 나타났다.

• 대한화학회지
• /
• 제55권2호
• /
• pp.262-267
• /
• 2011

형광 검출기를 기반으로 한 변성 고성능 액체 크로마토그래피(DHPLC)분석법은 핵산검출에 유용하게 사용되고 있으며 또한 등온증폭 반응법은 병원성 미생물의 효과적인 검출방법으로 알려져 있다. 이 연구에서는 HBV의 조기 분석 방법으로써 사용되는 등온증폭반응법(LAMP)과 변성고성능 액체 크로마토그래피(DHPLC)의 검출한계와 특이성, 그리고 민감도를 평가하였다. 등온증폭 반응법의 검출 시간이 가장 빠른 장점을 보였으나, 변성 고성능 액체 크로마토그래피 분석법이 등온증폭반응법과 real-time PCR분석법과 비교한 결과, 10배 이상의 높은 민감도를 확인 할 수 있었다. 본 결과로서 B형 간염 바이러스의 진단을 위하여, 빠른 검출법으로써 등온증폭 반응법이 유용하게 쓰일 수 있을 것이며 변성 고성능 액체 크로마토그래피 분석법은 좀 더 낮은 병원균의 감염도 검출할 수 있어, 임상에서 유용하게 사용할 수 있을 것이다.

• 조명전기설비학회논문지
• /
• 제18권2호
• /
• pp.8-15
• /
• 2004

본 논문은 RGB LED를 이용한 백색 전구의 색혼합 향상에 관한 것이다. RGB LED를 이용하여 전구를 설계하였을 경우, LED의 위치에 따라 광선의 진행 경로가 틀려 색혼합이 잘 되는 않는다. 따라서 각각의 LED에 경사렌즈를 씌워서 광선의 진행경로를 전구의 중심축으로 향하게 하여 주었다. 색혼합 정도는 MacAdam ellipse 이론을 이용하여 평가하였다.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.164-170
• /
• 2011

This paper proposes a novel monocular vision-based SLAM (Simultaneous Localization and Mapping) method using both position and orientation information of ceiling lamps. Conventional approaches used corner or line features as landmarks in their SLAM algorithms, but these methods were often unable to achieve stable navigation due to a lack of reliable visual features on the ceiling. Since lamp features are usually placed some distances from each other in indoor environments, they can be robustly detected and used as reliable landmarks. We used both the position and orientation of a lamp feature to accurately estimate the robot pose. Its orientation is obtained by calculating the principal axis from the pixel distribution of the lamp area. Both corner and lamp features are used as landmarks in the EKF (Extended Kalman Filter) to increase the stability of the SLAM process. Experimental results show that the proposed scheme works successfully in various indoor environments.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.101-105
• /
• 1994

The EL lamp have been fabricated by screen printing method. the thickness of BaTiO$_3$ dielectric layer and ZnS:Cu phosphor layer was 20 $\mu$m and 40 $\mu$m, respectively. The threshold voltage of green El lamp was 50 $V_{p-p}$ and the maximum brightness was 13.5 $\mu$ W/cm$^2$ at frequency of 700 Hz and the input voltage of 250 $V_{p-p}$. Also when the Rodamin G6 of 0.02 g was doped, the threshold voltage of white EL lamp was 70 $V_{p-p}$ and the maximum brightness was 34 $\mu$W/cm$^2$.

• 전기학회논문지P
• /
• 제63권2호
• /
• pp.69-73
• /
• 2014

In this paper, remote control and surveillance monitoring system of HID street-lamp using low-cost type of Zigbee communication module was developed. A plurality of capacitors with different capacity are attached to magnetic ballast for HID lamps. Changes in the amount of illumination can be adjusted by the changes in capacity so that the electric energy can be reduced. In Zigbee communication module, a ATmega128L microprocessor is used and in main CPU, ARM9 Core is used to construct a low-cost smart system. In surveillance monitoring systems, the system was configured to remote monitoring of presence of error in the lamp abnormalities, the status of leakage current and abnormalities of ballasts and capacitors and the validity of the proposed empirical experiment was confirmed.

• Journal of Information Display
• /
• 제10권2호
• /
• pp.49-53
• /
• 2009

In this study, a very small LED packaging lead frame with a low thermal resistance was developed. The cost of the package process was reduced by the use of many small LED lamps, which increased the light emission efficiency. Compared to the large lead frame lamp, however, the optical property of the small LED packaging lead frame lamp was not sufficiently improved because its reflection structure was changed and its reflection area was reduced. The luminous efficiency of the LED lamp reaches 58 lm/W at the current density of 0.16 A/$cm^2$. Using the LED lamps, 46-inch LCD BLU was manufactured. The BLU-made LED lamps have a low power consumption of 146 W and have a slim (10-mm-thick) BLU, keeping good uniformity in terms of brightness, and maintaining good thermal properties.

• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.567-575
• /
• 2015

An improvement in the current fed parallel resonant half bridge (CFPRHB) circuits used in fluorescent lamp electronic ballasts is provided in this paper. The CFPRHB belongs to the self-oscillating family which includes the current fed push-pull and series resonant inverters, most of which are used in instant-start applications. However, many failure modes are related to the bypass capacitor according to an analysis of failed samples. In this paper, the operating functions of the existing topology in the steady state are analyzed and the main root cause of failure modes has been found. Comparisons between the two topologies are conducted in terms of the voltage stress of the bypass capacitor as well as the thermal and performance of the ballasts to verify the advantages of the proposed topology. It is found that the improved topology is capable of enhancing the reliability and reducing the cost of products without having a negative influence on the system performance.

• 전력전자학회논문지
• /
• 제13권2호
• /
• pp.103-109
• /
• 2008

본 논문은 무전극램프의 조광제어에 관한 안정기 설계방법을 제안하였다. 주파수 가변을 통한 전력제어는 램프의 등가 임피던스를 나타내는 유도코일간의 결합계수, 플라즈마 저항은 전력에 대한 함수이기 때문에 부적합하다. 따라서 본 논문은 직류링크전압을 가변함으로서 램프 임피던스와 독립적으로 램프의 출력 전력을 제어함으로서 무전극램프를 조광제어 하였다. 직류 링크 전압 가변방법은 벅 컨버터에 의해 제어하였으며, 제안된 설계 방법의 시뮬레이션과 실험 결과를 통하여 논문의 타당함을 증명하였다.