• Journal of Welding and Joining
• /
• 제28권6호
• /
• pp.40-44
• /
• 2010

Laser assisted machining (LAM) has been researched in order to machine the silicon nitride ceramics economically and effectively. LAM is an effective machining method by local heating of the cutting part to the softening temperature of the silicon nitride using laser beam. When silicon nitride ceramics is heated using a laser beam, the surface of silicon nitride ceramic is softened, oxidized and decomposed. And then surface hardness is decreased. Through machining in low viscosity and hardness conditions, silicon nitride was machined effectively and the life span of tool was increased. The plastic deformation was occurred due to softening of amorphous YSiAlON above $ 1,000^{\circ}C$. Transgranular fracture of ${\beta}-Si_3N_4$ was occurred when YSiAlON was not softened, but mostly intergranular fracture was occurred by the plastic deformation of softened YSiAlON.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권7호
• /
• pp.963-970
• /
• 2010

This study makes an estimate of the laser-assisted machining (LAM) of an economically viable process for manufacturing precision silicon nitride ceramic parts using a high-power diode laser (HPDL). The surface is locally heated by an intense laser source prior to material removal, and the resulting softening and damage of the workpiece surface simplify the machining of the ceramics. The most important advantage of LAM is its ability to produce much better workpiece surface quality compared to conventional machining. Also important are its larger material removal rates and longer tool life. The cutting force and surface temperature were measured on-line using a pyrometer and a dynamometer, respectively. Tool wear, chips and the surface of the workpiece were measured using optical microscopy, and the surface and fractured cross-section of $Si_3N_4$ were measured by SEM. During the LAM process, the cutting force and tool wear were reduced and oxidation of the machined surface was increased according to the increase in the laser power. Moreover, the more the feed rate increased, the more the cutting force and tool wear increased.

• Journal of the Korean Wood Science and Technology
• /
• 제23권4호
• /
• pp.74-84
• /
• 1995

Eight types of thin composite panels were manufactured by press-lam and mat-forming process applied to optimum manufacturing condition, studied in former first research by author (1995). They were tested and compared with control boards on dimensional stability, internal bond strength, tensile strength, Screw withdrawal strength, and bending properties. These thin composite panels manufactured by mat-forming process were generally superior to those by press-lam in dimensional stability and mechanical properties. In the dimensional stability and mechanical properties of thin composite panels manufactured by mat-forming process, the thin composite panels (A and E type) composed of particle or sawdust core and veneer face with polyethylene film, were as good as those of common plywood (control board). Internal bond strength showed highest value in the thin composite panel(D type) which composed of particle core and polypropylene screen face with polyethylene film. The thin composite panels(G and H type) composed of sawdust or particle core and polypropylene screen face with polyethylene film by press-lam and mat-forming process, showed most highest value in dimensional stability and water absorption.

• Journal of Yeungnam Medical Science
• /
• 제27권1호
• /
• pp.63-68
• /
• 2010

Lymphangioleiomyomatosis (LAM) is a rare, cystic lung disease that is associated with mutation in the tuberous sclerosis genes, renal angiomyolipomas, lymphatic spread and a remarkable female gender predilection. The pathology of LAM is represented by the proliferation of immature smooth muscle cells in the walls of airways, and venules and lymphatic vessels in the lung. The clinical course of LAM is characterized by progressive dyspnea on exertion, recurrent pneumothorax and collections of chylous fluid. The diagnosis of pulmonary LAM can be made on chest X-ray, a high-resolution CT scan and lung biopsy. We experienced a case of pulmonary lymphangioleiomyomatosis in a 28-years-old female patient who had suffered from progressive dyspnea on exertion, so we report on it along with a brief review of the relevant literature.

• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.47-54
• /
• 2009

In the last few years, lasers have found new applications as tools for ceramic machining which is laser-assisted machining(LAM). LAM process for the machining of difficult-to-machine materials such as structural ceramics, has recently been studied on silicon nitride workpiece for a wide range of operating condition. However, there have been few studies on rake angle in LAM process. In this paper we analyzed difference of machinability between positive and negative rake angle in tools. We have obtained interesting results that we could eliminate chattering, lower specific cutting and cutting ratio in case of positive rake angle. The results suggest that positive rake angled tools can make more plastic deformation and stable cutting of silicon nitride in comparison with negative rake angled one.

• 정보보호학회논문지
• /
• 제13권3호
• /
• pp.45-55
• /
• 2003

무선랜은 전파라는 전송 매체를 사용함으로써 보안에 대한 취약성을 내포하고 있다. 보안 기능을 제공해 주는 PKI는 보안적인 측면뿐만 아니라 글로벌 로밍 서비스를 가능하게 하는 원천이 된다. 그러나 PKI를 사용할 경우에 인증과정에서 인증서 검증과 CRL 검색 등의 많은 오버헤드가 발생하게 된다. 초기 인증과 달리 핸드오프 시 효율적인 무선 서비스 제공을 위해서 사용자 등록 지연을 최소화 할 수 있는 빠른 인증 기법이 필요하다. 본 논문에서는 PKI를 이용한 인증 과정에서 발생할 수 있는 오버헤드를 최소화하여, 핸드오프 시 사용자 등록 지연을 방지 할 수 있는 새로운 인증 기법을 설계한다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제28권9호
• /
• pp.1226-1234
• /
• 2015

The development of effective genetic evaluations and selection of sires requires accurate estimates of genetic parameters for all economically important traits in the breeding goal. The main objective of this study was to assess the relative performance of the traditional lactation average model (LAM) against the random regression test-day model (RRM) in the estimation of genetic parameters and prediction of breeding values for Holstein Friesian herds in Ethiopia. The data used consisted of 6,500 test-day (TD) records from 800 first-lactation Holstein Friesian cows that calved between 1997 and 2013. Co-variance components were estimated using the average information restricted maximum likelihood method under single trait animal model. The estimate of heritability for first-lactation milk yield was 0.30 from LAM whilst estimates from the RRM model ranged from 0.17 to 0.29 for the different stages of lactation. Genetic correlations between different TDs in first-lactation Holstein Friesian ranged from 0.37 to 0.99. The observed genetic correlation was less than unity between milk yields at different TDs, which indicated that the assumption of LAM may not be optimal for accurate evaluation of the genetic merit of animals. A close look at estimated breeding values from both models showed that RRM had higher standard deviation compared to LAM indicating that the TD model makes efficient utilization of TD information. Correlations of breeding values between models ranged from 0.90 to 0.96 for different group of sires and cows and marked re-rankings were observed in top sires and cows in moving from the traditional LAM to RRM evaluations.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권22호
• /
• pp.9915-9919
• /
• 2014

Lamellarin D (LamD) is a marine alkaloid with a pronounced cytotoxicity against a large panel of cancer cells, affecting cell growth and inducing apoptosis. However, the molecular mechanisms of action of this compound are poorly understood. In this study, the anticancer efficacy of LamD was investigated in human leukemia K562 cells. The results showed suppressed cell proliferation and induction of G0/G1-phase arrest,while expression of CDK1, and activity of smad3 and smad5 were reduced, but that of p27, p53 and STGC3 was increased. LamD induced cell apoptosis through activation of caspases-8/-3, inhibition of survivin and Bcl-2, suggesting that this compound may also act through a caspase-independent pathway. Moreover, LamD inhibited the secretion of TGF-${\beta}$, IL-$1{\beta}$, IL-6, IL-8 and other inflammatory cytokines and the transcriptional activity of transcription factor NF-${\kappa}B$ in human leukemia K562 cells.Taken together, our results suggest that LamD-mediated inhibition of leukemia cell proliferation may be related to the induction of apoptosis and the regulation of cell cycle, tumor-related gene expression and cytokine expression, which may provide a new way of thinking for the treatment leukemia.

• Journal of the Korean Wood Science and Technology
• /
• 제23권2호
• /
• pp.55-69
• /
• 1995

The primary objective of this research was to investigate optimum manufacturing condition of thin composite panels composed of sawdust, polyethylene film and polypropylene net. At the study the experiment was designed to make thin board in which sawdust offers effectiveness as core composing material, polyethylene as adhesive with added urea resin, and polypropylene as stiffness and flexibility in the composition panel. 100 types of thin composite panels were manufactured according to press-lam and mat-forming process of various hot pressing conditions(pressure, temperature and time). They were tested and compared with control boards on bending properties(MOR, MOE, SPL, WML), internal bond strength, thickness swelling, linear expansion and water absorption. At the same time the visual inspections of each types of panels were accomplished. The physical and mechanical properties of composite types passed by visual inspection were analyzed by Tukey's studentized range test. From the statistical analysis, the optimum manufacturing condition of thin composite panels were selected. Compared with two manufacturing processes, mat-forming process performed better than press-lam process in all tested properties. The optimum manufacturing conditions resulted from the experiment and statistical analysis were able to determine as following: the press temperature was shown the most good result at 130$^{\circ}C$ in mat forming process and 140$^{\circ}C$ press lam process, the press time 4 min in both processes, but the press pressure was 25-10kg/$cm^2$ in mat forming and 15k/$cm^2$ press lam process.

• Applied Biological Chemistry
• /
• 제34권2호
• /
• pp.180-186
• /
• 1991

토양에서 분리한, 수용성 항진균성물질(solumycin)을 생산하는 Streptomyces sp. LAM-593의 배양액으로부터 butanol 추출, alumina와 2회의 Sephadex LH-20 column chromatography 등의 방법으로 물질을 정제하고 여러가지 성질을 조사한 결과는 다음과 같다. 본 물질은 silica gel TLC에서 단일 spot를 나타내었으며 ethanol-ammonia water-water (8:1:1). butanol-ethanol-water (5:1:4 및 5:2:2), 50% methanol계에서의 Rf치는 각각 0.24, 0.46, 0.57, 0.84였고, 물 methanol, acidic aq. butanol 등에 잘 용해하였으며 Fehling과 Molish 반응에서 양성인 342, 361. 380, 404nm에서 peak를 나타내는 heptaene계 물질이었다. 그리고 Candida, Cryptococcus, Saccharomyces, Trichophyton, Trichosporon 등의 진균에 대해서는 항균력이 컸으나 여러가지 세균에 대해서는 활성이 거의 없었다.