• 한국위성정보통신학회논문지
• /
• 제8권4호
• /
• pp.95-99
• /
• 2013

GPS는 차량용 네비게이션, 스마트폰 등의 일상생활에서 사용될 뿐만 아니라. 이동통신망, 전력망, 금융망 등 국가 기간통신망에 활용되는 중요한 인프라이다. 하지만 GPS는 신호세기가 미약하여 전파 교란에 매우 취약한 단점이 있다. GPS 교란은 사회적으로 혼란을 초래하는 심각한 문제이므로, 이를 예방 및 최소화하기 위하여 국가차원에서 GPS 전파교란 감시 기술 개발이 되어 운용되고 있다. 본 논문은 GPS L1/L2 대역의 교란신호를 검출하고, 교란신호의 방향 및 위치를 파악하는 기능을 제공하는 GPS 교란 감시장치의 구현 및 시험 결과를 제시한다. GPS 교란 감시 장치의 주요 기능, 형상 및 구성에 대해 설명하고, 동작 시나리오, S/W 및 H/W 구현 결과를 보여준다. 또한, GPS 교란신호를 발생시켜 검출, 방향파악 및 위치파악 시험을 수행하였고, 그 결과를 통해 GPS 교란 감시 장치가 정상적으로 동작됨을 보여준다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.211-215
• /
• 2006

In this paper, design and applications of a generalized, versatile and customizable IF signal generator that can model the modernized GPS and Galileo signal is given. It generates IF sampled data that can be directly used by a software receiver. Entire constellation of satellites which is independent of satellite-user geometry is easily determined using a real or simulated ephemeris data. Since the IF center frequency, sampling frequency and quantization bit number are user location dependent parameters, their effects are also considered in IF signal generator. The generalized IF signal generator will be very well suited for the development phase of a software receiver due to its versatility. The full access to the sampling frequency, front-end filter definition and ADC parameters also offers a great opportunity for cost-effective analysis of tracking loops and error mitigation techniques at the receiver level. Interference sources can be easily added to the generator to simulate specific environments. This software IF signal generator can also be used to feed a multi-frequency multi-system software receiver for the prototyping of a combined GPS/Galileo receiver. The test result using the generated signals and a real software receiver shows the effectiveness of the implemented IF signal generator.

• Molecules and Cells
• /
• 제26권1호
• /
• pp.81-86
• /
• 2008

RNA interference (RNAi) was performed on several essential genes in the pinewood nematode Bursaphelenchus xylophilus, which causes pine wilt disease. Double-stranded RNA (dsRNA) was delivered to larvae or adult worms by soaking, electroporation, or microinjection. Soaking and electroporation of L2-L3 stage worms in solutions containing dsRNA for essential genes induced over 25% lethality after 5 days, and gene-specific phenotypes were observed. This lethality agreed with significant reductions of the targeted transcripts, as assayed by reverse-transcription coupled with real time PCR. Microinjection was the most efficient route as measured by the hatching rate of F1 embryos, which was reduced by 46%. When adult worms were soaked in dsRNA, lethality was induced in the F1 larvae, revealing the persistence of knockdown phenotypes. The penetrance of the RNAi phenotypes for essential genes was relatively low but consistent, indicating that RNAi should be useful for studying the in vivo functions of B. xylophilus gene products.

• 한국통신학회논문지
• /
• 제26권11B호
• /
• pp.1522-1533
• /
• 2001

본 논문에서는 cdma2000 시스템에서 순방향 폐루프전력제어를 위해 수신 E$_{b}$/I$_{o}$ 를 추정하는 방법을 다루고 있다. 이동국 수신 b//I$_{o}$ 의 추정은 순방향 전력제어 부채널(forward power control subchannel) 전송 심벌을 이용하고 있다. 수신비트에너지와 잡음분산의 추정은 주파수 선택적 Rayleigh 페이딩 채널에서 해석되었다. 특히, 수신비트에너지의 추정은 SIR(signal-to-interference ratio)을 향상시키기 위해서 rake 핑거들과 1/Q 수신심벌들웨 대하여 코히런트 결합에 의해 수행되었다. 그리고 본 논문에서는 차량속도와 전력조정스텝크기에 따른 순방향 폐루프 전력제어의 성능을 비트오율과 전력제어에러 측면에서 평가하고 있다. 시뮬레이션 결과로는 차량속도에 따른 최적의 전력조정스텝크기를 제시하고 있다.

• 대한화학회지
• /
• 제35권5호
• /
• pp.545-552
• /
• 1991

수은 이온의 정량을 위해 l-sparteine으로 처리한 carbon paste 전극(CPE)을 제작하였다. 수용액중의 수은 이온을 CPE에 수식 시킨 l-sparteine과 반응시켜 착화합물 상태로 전극표면에 석출시킨 후 이 착물을 벗김 전압-전류곡선법을 사용하여 정량하였다. 또한 수식된 CPE의 전극반응을 순환 전압 전류 곡선법을 사용하여 초산/초산염 완충용액에서 조사하였다. 한번 사용한 전극은 산 용액으로 처리하여 5회 이상 재사용할 수 있었다. 선형주사 전압전류법을 사용하였을 경우 $2.0{\times}10^{-6}$ M 농도까지 정량이 가능하였다. 시차펄스 전압전류법으로 실험할 경우 $7.0 {\times}10^{-7}$ M 농도까지 직선적으로 감응함을 알 수 있었으며 그 때의 상대 표준편차는 ${\pm}$5.1% 이었다. 이 경우 검출 한계는 $5.O{\times} 10^{-7}$ M이었다. 리간드와 착물을 형성할 것으로 예상되는 여러 금속이온에 대한 방해 작용을 조사하였다. 그 결과 은(I) 이온이 방해를 하지만 염화칼륨으로 사전 처리하여 방해작용을 제거할 수 있었다.

• Journal of Magnetics
• /
• 제13권1호
• /
• pp.19-22
• /
• 2008

ZnO nanotips, grown on c-$Al_2O_3$ and quartz, were implanted variously with 200 keV Fe or Mn ions to a dose level of $5{\times}10^{16}cm^{-2}$. The magnetic properties of these samples were measured using a superconducting quantum interference device (SQUID) magnetometer. Fe-implanted ZnO nanotips grown on c-$Al_2O_3$ showed a coercive field width of 209 Oe and a remanent field of 12% of the saturation magnetization ($2.3{\times}10^{-5}emu$) at 300K for a sample annealed at $700^{\circ}C$ for 20 minutes. The field-cooled and the zero-field-cooled magnetization measurements also showed evidence of ferromagnetism in this sample with an estimated Curie temperature of around 350 K. The Mn-implanted ZnO nanotips grown on c-$Al_2O_3$ showed superparamagnetism resulting from the dominance of a spin-glass phase. The ZnO nanotips grown on quartz and implanted with Fe or Mn showed signs of ferromagnetism, but neither was consistent.

• 대한설비공학회지:설비저널
• /
• 제17권4호
• /
• pp.448-455
• /
• 1988

A study has been conducted experimentally on natural convection heat transfer characteristics of a vertical flat plate with horizontal rectangular fins in air. The effects of fin heights and Rayleigh numbers are mainly investigated. The experimental results are as follows; 1. The mean fin, plate and total Nusselt numbers decrease as dimensionless fin heights H/S increase at $0.50{\leq}H/S{\leq}2.00$. 2. The mean fin surface Nusselt number in case of H/S = 0.50 and $Ra_c=4.33{\times}10^3$ shows its maximum at $X_1$, surface where there is no interference with other fins. 3. Owing to the interference of fins the mean plate Nusselt numbers at H/S=0.50 and 2.00 for $Ra_S=6.57{\times}10^3$ are 35% and 80% respectively less than the mean fin Nusselt numbers. 4. The mean fin, plate and total Nusselt numbers of horizontal rectangular fins show higher values at short fins, but lower values at long fins than those of upward vertical fins.

• Bulletin of the Korean Chemical Society
• /
• 제27권4호
• /
• pp.563-567
• /
• 2006

The application of a synergistic solvent extraction by the formation of ternary complex with pyrocatechol violet (PV) and benzalkonium chloride (BC) was studied for determination of trace Zn(II) in water samples. The pH of sample solution and the amount of PV and BC added were optimized for the formation of the stable complex, a proper solvent was selected for the effective extraction, and the concentration of nitric acid was fixed for the back extraction of the complex from the solvent. After the ionic strength of 100 mL sample solution was adjusted to 0.1 M by adding NaCl and the pH was fixed at 9 with a carbonate buffer, 1.0 mL of 2% PV solution was added to form Zn(II)-PV complex then the Zn(II)-PV/BC ternary complex was made by adding 1.0 mL of 10% BC solution. The ternary complex was extracted into 10 mL of MIBK. And the ternary complex was back-extracted with 10 mL of 1.0 mol/L nitric acid to determine Zn(II) by a flame atomic absorption spectrophotometer (flame-AAS). The interference of concomitant ions on the extraction of Zn(II) was investigated. This procedure was applied to the analysis of three real samples such as Dalbang-dam water, laboratory tap water and Jungnajin seawater. The recoveries of Zn(II) in spiked samples were 86.58-104.1%.

• Bulletin of the Korean Chemical Society
• /
• 제27권6호
• /
• pp.875-880
• /
• 2006

A new, simple and fast flow injection analysis (FIA) method has been developed for the indirect determination of nitrite. The proposed indirect automatic method is based on the oxidation of nitrite to nitrate using a lead(IV) dioxide oxidant microcolumn where the flow of the sample through the microcolumn reduces the $PbO_2$ solid phase reagent to Pb(II), which is measured by flame atomic absorption spectrometry. The absorbance of Pb(II) are proportional to the concentration of nitrite in the samples. The calibration curve was linear up to 30 mg $L ^{-1}$, with a detection limit of 0.11 mg $L ^{-1}$ for a 400 mL injected sample volume and a sampling rate of about 80 $h ^{-1}$. The results exhibit no interference from the presence of large amounts of ions. The developed procedure was found to be suitable for the determination of nitrite in foodstuffs and wastewaters. A relative standard deviation better than 0.9% was obtained in a repeatability study. The reliability of the method was established by parallel determination against the standard method.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권4호
• /
• pp.349-354
• /
• 1997

This paper aims at studying the improvement of test method for t-weight sensitive fault (t-wsf) detect. The development of RAM fabrication technology results in not only the increase at device density on chips but also the decrease in line widths in VLSI. But, the chip size that was large and complex is shortened and simplified while the cost of chips remains at the present level, in many cases, even lowering. First of all, The testing patterns for RAM fault detect, which is apt to be complicated , need to be simplified. This new testing method made use of Local Lower Bound (L.L.B) which has the memory with the beginning pattern of 0(l) and the finishing pattern of 0(1). The proposed testing patterns can detect all of RAM faults which contain stuck-at faults, coupling faults. The number of operation is 6N at 1-weight sensitive fault, 9,5N at 2-weight sensitive fault, 7N at 3-weight sensitive fault, and 3N at 4-weight sensitive fault. This test techniques can reduce the number of test pattern in memory cells, saving much more time in test, This testing patterns can detect all static weight sensitive faults and pattern sensitive faults in RAM.