• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.754-758
• /
• 2009

To develop soybean cake as a functional food material, the anti-oxidative and cytotoxic activities against human colon cancer cells of crude saponins isolated from 70% (v/v) ethanol extracts of cake were investigated. The Diaion HP-20 adsorption method was used for isolation of crude saponins, which were then eluted with 100% ethanol. The non-saponin fraction was removed by elution with $H_2O$ and 20% (v/v) ethanol. The results of thin layer chromatography (TLC) analysis confirmed that crude saponins were present in the 100% ethanol extract of soybean cake. The hydrogen-donating properties of saponins were more than 60% at a concentration of $1,000\;{\mu}g/mL$. malondialdehyde(MDA) production was $1,200\;{\mu}mol\;MDA/g$ in mouse liver homogenate treated with crude saponins at the concentration of $1,000\;{\mu}g/mL$. This value was lower than that of the control, which was $3,700\;{\mu}mol\;MDA/g$. Saponins inhibited the growth of colon cancer cells in a dose- and time-dependent manner. Saponins also resulted in a decrease in the proportion of cells in the G1 phase of the cell cycle, whereas the cell proportion in G2/M phase was increased with $1,000\;{\mu}g/mL$ saponins. Thus, we conclude that saponins may induce G2/M cell cycle arrest.

• Journal of applied mathematics & informatics
• /
• v.11 no.1_2
• /
• pp.185-199
• /
• 2003

In this paper, we apply finite element Galerkin method to a single-phase quasi-linear Stefan problem with a forcing term. We consider the existence and uniqueness of a semidiscrete approximation and optimal error estimates in $L_2$, $L_{\infty}$, $H_1$ and $H_2$ norms for semidiscrete Galerkin approximations we derived.

• The Journal of the Korean Society for Microbiology
• /
• v.20 no.1
• /
• pp.91-102
• /
• 1985

The advantages of enzyme-linked immunosorbent assay(ELISA) are its senstivity and simplicity in detecting IgG, IgM and IgA antibody. To apply ELISA to diagnosis of typhoid fever, antigen such as lipopolysaccharide of Salmonella typhi or killed whole cell must be coated on solid phase. It is easy to coat lipopolysaccharide on ELISA plate but troublesome to purify it. As it is easy to obtain the killed whole cells, the development of the appropriate method by which those antigens of S. typhi are optimally coated on solid phase is needed. To establish the appropriate method, carbonate buffer, methanol or poly-L-lysine was applied as binding substance on polystyrene or polyvinylchloride plate as solid phase when the killed whole cell antigens of S. typhi varided as follows: $10^6$, $10^7$, $10^8$ and $10^9\;cell/ml$. The criteria of the optimal method were determined as follows: 1. The optical density of positive sera is above 1.0(0.6 in IgM) at 1:10 serum dilution and is 0.3(0.2 in IgM) higher than that of negative sera: 2. The O.D. of sera is flat or lowering according to serum dilution: 3. It must be that the O.D. of negative sera is lower than 0.2 at the point of serum dilution where the O.D. of positive sera is higher than 1.0(0.5 in IgM). The results obtained were summarized as follows: 1. The methods which fitted the above criteria were to use poly-L-lysine as binding substance, polyvinylchloride plate as solid phase and $10^7\;cell/ml$ as antigen concentration of S. typhi(poly-L-lysine/polyvinylchloride/$10^7$) and poly-L-lysine/polyvinylchloride/$10^8$ in detecting IgG antibody, methanol/polystyrene/$10^9$, poly-L-lysine/polyvinylchloride/$10^8$ and poly-L-lysine/polyvinylchloride/$10^9$ in IgM and carbonate buffer/polystyrene/$10^8$, carbonate buffer/polystyrene/$10^9$, methanol/polystyrene/$10^8$, methanol/polyvinylchloride/$10^8$, methanol/polyvinylchloride/$10^9$, poly-L-lysine/polyvinylchloride/$10^8$ and poly-L-lysine/polyvinylchloride/$10^9$ in IgA. 2. The coaling method using poly-L-lysine, polyvinylchloride plate and $10^8\;cell/ml$ was best to assay IgG, IgM and IgA antibody all in one. By this method, to assay the each immunoglobulin calss with an appropriate fixed serum dilution, 1:320 dilution was best.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.195-202
• /
• 1998

In this study, we utilized various type of GPS observation measurements to get a camera projection center of the aerial triangulation and consequently to determine which type is acceptable. For the accuracy and the error analysis, comparison between a projection center from the conventional model adjustment and the result determined by the kinematic DGPS positioning which is fitted to the conventional model adjustment using 3D conformal transformation method has been made. The camera projection center is located within a $\pm{2m}$ for C/A code range measurements, $\pm{14cm}$ for L1 phase measurements and $\pm{10cm}$ for L1/L2 phase measurements with $1\sigma$. In this way, the accuracy of the camera projection center by the bundle block adjustment can be predicted.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.8
• /
• pp.1195-1202
• /
• 2004

In this paper an experimental study was investigated for two-phase flow distribution in compact heat exchanger header. A test section was consisted of the horizontal bottom dividing header($\phi$: 5 mm, L: 80 mm) and 10 upward circular mini channels ($\phi$: 1.5 mm, L: 850 mm) using an acrylic tube. Three different types of tube intrusion depth were tested for the mass flux and inlet mass quality ranges of 50 - 200 kg/$m^2$s and 0.1 - 0.3, respectively. Air and water were used as the test fluids. The distribution of vapor and liquid is obtained by measurement of the total mass flow rate and the calculation of the quality. Two-phase flow pattern was observed, and pressure drop of each channel was measured. By adjusting the intrusion depth of each channel an uniform liquid flow distribution through the each channel was able to solve the mal-distribution problem.

• Journal of Welding and Joining
• /
• v.14 no.3
• /
• pp.75-85
• /
• 1996

In this paper the influence of postweld heat treatment on mechanical properties of SMAW and FCAW stainless steel weldments was examined and the obtained results are as follows ; (1) The amount of $\delta$-ferrite formed by SMAW and FCAW process decreased with increasing holding temperature and time in post weld heat treatment(PWHT), and it was found that the reduced ferrite was transformed into sigma phase after $800^{circ}C{\times}50hr$ PWHT. This sigma phase, even though it was very small, resulted in brittleness of dissimilar weldment between carbon steel and stainless steel in bending test, however in similar weldment between stainless steel and stainless steel was not occured. (2) The chemical composition of sigma phase was measured to 28-30%Cr, 7-9%Mo, 4-6Ni in 316L weldment, and also 35-37%Cr, 0.9-1.0Mo, 6-8%Ni in 309L weldment by EDS analysis.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.110-112
• /
• 1995

In this paper, We have designed the new Two-Double 1-2 phase exciting method. And We have developed the chopper constant current drive circuit in order to apply Two-Double 1-2 phase exciting method to 4-phase Stepping Motor.

• Journal of Korean Society on Water Environment
• /
• v.27 no.3
• /
• pp.329-333
• /
• 2011

p-phenylene-2,5-benzobisoxazole (PBO; Zylon$(R)$) fibers as an adsorbent were employed for solid phase extraction of aqueous alkylphenols. The removal ratios for 10 kinds of alkylphenols at initial concentration of $100{\mu}gL^{-1}$ were in the range of 16.8-96.3% and the removals increased with the increase of the phase ratio (fiber weight/solution volume). The plots of the logarithm of partition coefficient (log K) were correlated with the logarithm of the n-octanol/water partition coefficient (log P). The adsorbed alkylphenols were completely desorbed with the mixture of acetonitrile and dichloromethane.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.5
• /
• pp.655-667
• /
• 2001

This experiment was conducted to investigate the effect of feeding a low CP diet supplemented with synthetic amino acids on performance, nutrient utilization and carcass characteristics of finishing pigs fed under a three-phase feeding regimen. Ninety-six finishing pigs (Landrace$\times$Large White$\times$Duroc), $55.75kg{\pm}0.65$ of initial body weight, were blocked by weight and sex and allotted to four dietary treatments in a randomized block design. There were six pens per treatment and four pigs per pen. Pigs were fed a 16%-14%-12% CP (for phase I-II-III, respectively), sequence of diets. Dietary treatments were 1) Control, 2) Con+L (a sequence of diets reduced in CP by l percentage unit with lysine (L) supplementation, 3) Con+LMT (a sequence of diets reduced in CP by 2 percentage unit with LYS, methionine (MET) and threonine (THE) supplementation) and 4) Con+LMTT (a sequence of diets reduced in CP by 3 percentage unit with LYS, MET, THR and tryptophan (TRP) supplementation). The finishing period (55 to 105 kg) was divided into three phases (55 to 72 kg, 72 to 90 kg and 90 to 105 kg). Pigs fed either the control or Con+L diet grew faster (p<0.05) than pigs fed the Con-LMT or Con+LMTT diet. There was no difference in ADFI among dietary treatments. Phosphorus (P) digestibility was lowest in the control group and highest in the Con+LMTT group (p<0.05). Within each phase, no significant differences in dry matter (DM) and CP digestibilities were found. Although some amino acid digestibilities were affected by dietary treatments, digestibilities of essential amino acids (EAA), non-essential amino acids (NEAA) and total amino acid were not significantly influenced by dietary treatments. For the entire experiment periods, Con+L, Con+LMT and Con+LMTT treatments resulted in 13.4, 18.8 and 21.6% lower total N excretion compared with the control. Con+LMT and Con+LMTT treatments showed significantly lower BUN concentration compared with the control and Con+L treatment (p<0.05), but there was no significant difference in BUN concentration between pigs fed the control and Con+L treatment or between pigs fed Con+LMT and Con+LMTT treatments (p>0.05). Carcass length, backfat thickness and carcass grade were not significantly affected by dietary treatments (p>0.05). In conclusion, reducing dietary CP level by 1 percentage unit and supplementing only LYS at each phase could be a very beneficial feeding strategy for finishing pigs fed under a three phase feeding regimen in terms of both environmental and economical aspects.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.217-223
• /
• 2004

In order to improve real-time positioning accuracy, a number of methods have been tested and one of those is the inverted RTK(Real-time kinematic) that gives a precise positioning by handling carrier phase measurements. For the inverted RTK positioning, it needs the L1 phase measurement at least for 1～2 minutes and the additional reference stations/communication system and a data processing server are required. The L1 code and carrier phase measurements for real-time application are used simultaneously and then Kalman filter is applied to estimate integer ambiguities. Double differenced integer ambiguities are resolved by utilizing the FARA(Fast Ambiguity Resolution Approach). In this paper, we propose the method to improve the positioning accuracy and performed the field tests for several baselines from DAEJ reference station in KAO(Korea Astronomy Observatory).