• Title/Summary/Keyword: L.E.O

Search Result 1,460, Processing Time 0.026 seconds

PL Property of Al-N Codoped p-type ZnO Thin Films Fabricated by DC Magnetron Sputtering

  • Liu, Yan-Yan;Jin, Hu-Jie;Park, Choon-Bae;Hoang, Geun-C.
    • Transactions on Electrical and Electronic Materials
    • /
    • v.10 no.3
    • /
    • pp.89-92
    • /
    • 2009
  • High-quality Al-N doped p-type ZnO thin films were deposited on Si and buffer layer/Si by DC magnetron sputtering in a mixture of $N_2$ and $O_2$ gas. The target was ceramic ZnO mixed with $Al_2O_3$ (2 wt%). The p-type ZnO thin films showed a carrier concentration in the range of $1.5{\times}10^{15}{\sim}2.93{\times}10^{17}\;cm^{-3}$, resistivity in the range of 131.2${\sim}$2.864 ${\Omega}cm$, mobility in the range of 3.99${\sim}$31.6 $cm^2V^{-1}s^{-l}$, respectively. It was easier to dope p-type ZnO films on Si substrates than on buffer layer/Si. The film grown on Si showed the highest quality of photoluminescence (PL) characteristics. The Al donor energy level depth $(E_d)$ of Al-N codoped ZnO films was reduced to about 50 meV, and the N acceptor energy level depth $(E_a)$ was reduced to 63 meV.

Spatial heterogeneity in macroinvertebrate density from Lake Hövsgöl, Mongolia

  • Hayford, Barbara;Goulden, Clyde;Boldgiv, Bazartseren
    • Journal of Species Research
    • /
    • v.2 no.2
    • /
    • pp.159-166
    • /
    • 2013
  • Typical of large, oligotrophic lakes, Lake H$\ddot{o}$vsg$\ddot{o}$l, Mongolia, exhibits complex morphometry which should support a spatially heterogeneous community of benthic macroinvertrates. The lake also exhibits a broad range of land uses. Based on the variation in land use and complex physical habitat of the lake (e.g. substrate variation and presence of affluent streams in bays), we asked two questions. First, does density of total benthic macroinvertebrates vary between different bays in Lake H$\ddot{o}$vsg$\ddot{o}$l? Second, does density of individual benthic taxa vary by bay? Samples collected in 1997, the last year for benthic sampling of the lake, were designed to test for variation in macroinvertebrate density between bays and can now be used to establish baseline variation in density for future studies. A total of 56 Ponar grab samples were analyzed from six bays in Lake H$\ddot{o}$vsg$\ddot{o}$l. Results of a general linear model analysis of variance showed that total density of macroinvertebrates varied only slightly between bays of the lake, but that most individual taxa showed significant variation between bays. Variation in density for most taxa was linked to substrate composition rather than other geographic or physical variables in the lake. Recent increases in grazing intensity and ecotourism along the shores should be managed to reduce the nutrient load into the lake to avoid impairment of the benthic biota of this unique, ancient ecosystem.

LEFT-INVARIANT FLAT RIEMANNIAN STRUCTURES ON LIE GROUPS

  • Park, Kyeong-Su
    • Journal of applied mathematics & informatics
    • /
    • v.16 no.1_2
    • /
    • pp.453-459
    • /
    • 2004
  • A left-invariant flat Riemannian connection on a Lie group makes its Lie algebra a left symmetric algebra compatible with an inner product. The left symmetric algebra is decomposed into trivial ideal and a subalgebra of e(l). Using this result, the Lie group is embedded isomorphically into the direct product of O(l) $\times$ $R^{k}$ for some nonnegative integers l and k.

Spectral Response of $TiO_{2}$/Se : Te Heterojunction for Color Sensor (컬러센서를 위한 $TiO_{2}$/Se : Te 이종접합의 스펙트럼 응답)

  • Woo, Jung-Ok;Park, Wug-Dong;Kim, Ki-Wan;Lee, Wu-Il
    • Journal of Sensor Science and Technology
    • /
    • v.2 no.1
    • /
    • pp.101-108
    • /
    • 1993
  • $TiO_{2}$/Se : Te heterojunction for color sensor has been fabricated by RF reactive sputtering and thermal evaporation methods onto glass substrate. The optimum deposition condition of $TiO_{2}$ films was such that RF power was 120 W, substrate temperature was $100^{\circ}C$, oxygen concentration was 50%, working pressure was 50 mTorr for the $TiO_{2}$ film thickness of $1000{\AA}$. In this case, the optical transmittance of $TiO_{2}$ film at 550 nm-wavelength was 85%, resistivity was $2{\times}10^9{\Omega}{\cdot}cm$, refractive index was 2.3, and optical bandgap was 3.58 eV. The composition ratio of 0 to Ti by AES analysis was 1.7. When $TiO_{2}$ films were annealed at $400^{\circ}C$ for 30 min. in $O_{2}$ ambient, the optical transmittance of $TiO_{2}$ films at the wavelength range of $300{\sim}580$ nm was improved from 0 to 25%. When Se : Te films were annealed at $190^{\circ}C$ for 1 min., photosensitivity under illumination of 1000 lux was 0.75. The optical bandgap of Se : Te films was 1.7 eV. The structures of Se : Te films were the hexagonal with (100) and (110) orientation. The spectral response of a-Se was improved by the addition of Te, especially in the long wavelength region. The $TiO_{2}$/Se : Te heterojunction showed wide spectral response, and more improved one than that of a-Si film in the blue light region.

  • PDF

Development of High-Performance Ultra-small Size RF Chip Inductors (고성능의 초소형 RF 칩 인덕터 개발)

  • 윤의중;천채일
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.17 no.3
    • /
    • pp.340-347
    • /
    • 2004
  • Ultra-small size, high-performance, solenoid-type RF chip inductors utilizing low-loss A1$_2$O$_3$ core materials were investigated. The dimensions of the RF chip inductors fabricated were 1.0mm${\times}$0.5mm${\times}$0.5mm and copper coils were used. The materials (96% A1$_2$O$_3$) and shape (I-type) of the core, the diameters (40${\mu}{\textrm}{m}$) and position (middle) of the coil, and the lengths (0.35mm) of solenoid were determined by a high-frequency structure simulator (HFSS) to maximize the performance of the inductors. The high-frequency characteristics of the inductance (L) and quality-factor (Q) of the developed inductors were measured using a RF impedance/material analyzer (E4991A with E16197A test fixture). The developed inductors exhibit an inductance of 11 to 11.3nH and a qualify factor of 22.3 to 65.7 over the frequency ranges of 250 MHz to 1.7 GHz, and show results comparable to those measured for the inductors prepared by Coilcraft$^{TM}$. The simulated data described the high-frequency data of the L and Q of the fabricated inductors well.

Changing Patterns of Communicable Diseases in Korea (우리나라 전염성 질환의 변화 양상)

  • Lim, Hyun-Sul
    • Journal of Preventive Medicine and Public Health
    • /
    • v.38 no.2
    • /
    • pp.117-124
    • /
    • 2005
  • Before twentieth centuries and during early twentieth centuries, communicable diseases were the major cause of morbidity and mortality in Korea. But reliable data are not available. After 1975, the overall morbidity and mortality from communicable diseases, rapidly declined. Recently many new pathogenic microbes were recognized: L. monocytogenes, Hantaan virus, Y. pseudotuberculosis, P. multocida, L. pneumophilia, Human immunodeficiency virus (HIV), G. seoi, H. capsulatum, C. burnetii, V. cholerae O139, C. parvum, F. tularensis, E. coli O157:H7, B. burgdorferi, S. Typhimurium DT104, Rotavirus, hepatitis C virus and so on. Since the first HIV infection recognized in 1985, the reported cases of infection and deaths from HIV/AIDS have been steady increased each year. Legionnaire's disease, E. coli O157:H7 colitis, listeriosis and crytosporidiasis have been occurring just sporadically among immunocompromized cases. Many re-emerging communicable diseases were occurred in Korea: leptospirosis, malaria, endemic typhus, cholera, tsutsugamushi disease, salmonellosis, hepatitis A, shigellosis, mumps, measles, acute hemorrhagic conjunctivitis, brucellosis and so on. Leptospirosis and tsutsugamushi diseases have been noticed as major public health problems since 1980s. The malaria that had been virtually disappeared for a decade has reappeared from 1993 with striking increase of patients in recent 3-4 years. The distributions of salmonella and shigella serotypes have been changed a lot in recent few decades. Furthermore rapid emergence of antibiotic-resistant bacterial strains induces more difficult and complex problems in control of communicable diseases. We must recognize on the importance of environment and ecosystem conservation and careful prescription of anti-microbial agent in order to prevent communicable diseases.

Incorporating Grapefruit Seed Extract into Gelidium corneum-Whey Protein Isolate Blend Packaging Film Increases the Shelf Life of Fish Paste

  • Lim, Geum-Ok;Hong, Yun-Hee;Song, Kyung-Bin
    • Preventive Nutrition and Food Science
    • /
    • v.13 no.4
    • /
    • pp.370-374
    • /
    • 2008
  • The Gelidium corneum (GC)-whey protein isolate (WPI) blend film containing grapefruit seed extract (GSE) was prepared by incorporating different amounts (0, 0.02, 0.04, 0.08, 0.1%) of GSE into the film. The film's tensile strength (TS) and water vapor permeability (WVP) were improved by the addition of GSE. The film containing 0.1% GSE had a TS of 3.27 MPa, whereas the control had 2.64 MPa. WVP of the film was also significantly decreased by the addition of GSE. Addition of 0.1% GSE decreased the populations of Escherichia coli O157:H7, Listeria monocytogenes, and Salmonella Typhimurium by 1.0, 1.6, and 0.6 log CFU/g, respectively, compared to the control. Fish paste was packed with the GC-WPI blend film containing GSE, and microbial change in the fish paste inoculated with E. coli O157:H7, L. monocytogenes, and S. Typhimurium during storage was examined. Populations of E. coli O157:H7, L. monocytogenes, and S. Typhimurium were decreased by 0.60, 0.48, and 0.85 log CFU/g, after 7 day of storage, respectively. These results suggest packaging fish paste in the GC-WPI blend film containing GSE can extend the shelf life.

The study of High-K Gate Dielectric films for the Application of ULSI devices (ULSI Device에 적용을 위한 High-K Gate Oxide 박막의 연구)

  • 이동원;남서은;고대홍
    • Proceedings of the Korea Crystallographic Association Conference
    • /
    • 2002.11a
    • /
    • pp.42-43
    • /
    • 2002
  • 반도체 디바이스의 발전은 높은 직접화 및 동작 속도를 추구하고 있으며, 이를 위해서 MOSFET의 scale down시 발생되는 문제를 해결해야만 한다. 특히, Channel이 짧아짐으로써 발생하는 device의 열화현상으로 동작전압의 조절이 어려워 짐을 해결해야만 하며, gate oxide 두께를 줄임으로써 억제할 수 있다고 알려져 왔다. 현재, gate oxide으로 사용되고 있는 SiO2박막은 비정질로써 ~8.7 eV의 높은 band gap과 Si기판 위에서 성장이 용이하며 안정하다는 장점이 있으나, 두께가 1.6 nm 이하로 얇아질 경우 전자의 direct Tunneling에 의한 leakage current 증가와 gate impurity인 Boron의 channel로의 확산, 그리고 poly Si gate의 depletion effect[1,2] 등의 문제점으로 더 이상 사용할 수 없게 된다. 2001년 ITRS에 의하면 ASIC제품의 경우 2004년부터 0.9~l.4 nm 이하의 EOT가 요구된다고 발표하였다. 따라서, gate oxide의 물리적인 두께를 증가시켜 전자의 Tunneling을 억제하는 동시에 유전막에 걸리는 capacitance를 크게 할 수 있다는 측면에서 high-k 재료를 적용하기 위한 연구가 진행되고 있다[3]. High-k 재료로 가능성 있는 절연체들로는 A1₂O₃, Y₂O₃, CeO₂, Ta₂O, TiO₂, HfO₂, ZrO₂,STO 그리고 BST등이 있으며, 이들 재료 중 gate oxide에 적용하기 위해 크게 두 가지 측면에서 고려해야 하는데, 첫째, Si과 열역학적으로 안정하여 후속 열처리 공정에서 계면층 형성을 배제하여야 하며 둘째, 일반적으로 high-k 재료들은 유전상수에 반비례하는 band gap을 갖는 것으로 알려줘 있는데 이 Barrier Height에 지수적으로 의존하는 leakage current때문에 절연체의 band gap이 낮아서는 안 된다는 점이다. 최근 20이상의 유전상수와 ~5 eV 이상의 Band Gap을 가지며 Si기판과 열역학적으로 안정한 ZrO₂[4], HfiO₂[5]가 관심을 끌고 있다. HfO₂은 ~30의 고유전상수, ~5.7 eV의 높은 band gap, 실리콘 기판과의 열역학적 안전성 그리고 poly-Si와 호환성등의 장점으로 최근 많이 연구가 진행되고 있다. 또한, Hf은 SiO₂를 환원시켜 HfO₂가 될 수 있으며, 다른 silicide와 다르게 Hf silicide는 쉽게 산화될 수 있는 점이 보고되고 있다.

  • PDF

The Thermal Shock Behaviors of Y-TZP/Y-TZP-Al2O3 Composites having Dual Microstructure (이중조직을 갖는 Y-TZP/Y-TZP-$Al_2O_3$ 복합체의 열충격 거동)

  • Hwang, K.H.;Kim, E.H.;Kim, Hwan
    • Journal of the Korean Ceramic Society
    • /
    • v.29 no.4
    • /
    • pp.283-292
    • /
    • 1992
  • Duplex composites such as Y-TZP/Y-TZP-20 wt.% Al2O3 and Y-TZP/Y-TZP- 40 wt.% Al2O3 were made by mixing the sieve-shaked granules followed by isostatic pressing and sintering at 150$0^{\circ}C$ for 1 hour. So Y-TZP became matrix region and Y-TZP-20 wt.% Al2O3 or Y-TZP-40 wt.% Al2O3 became dispersed regions. In these composites, propagating cracks due to thermal shock always run into the dispersed region because these regions act as compressive zone due to low thermal expansion than matrix region. So duplexes having dispersed regions of Y-TZP-40 wt.% Al2O3 showed higher retained strength after thermal shock than matrix only composites because crack propagations were stopped more or less in the dispersed region. But when crack propagations were much more easy than matrix like Y-TZP-20 wt.% Al2O3 region, retained strength was decreased than the matrix only composites despite of the low initial strength.

  • PDF

Effect of UV Irradiation and TiO2 Addition on the Ozonation of Pyruvic Acid (피루브산의 오존산화반응에 미치는 TiO2 첨가 및 UV 조사의 영향)

  • Lee, Cheal-Gyu
    • Journal of Korean Society on Water Environment
    • /
    • v.32 no.1
    • /
    • pp.23-29
    • /
    • 2016
  • Ozonation was investigated for its ability to remove pyruvic acid in a laboratory-scale batch reactor under various experimental conditions, including UV irradiation, TiO2 addition, and variations in temperature. An ozone flow rate of 1.0 L min-1 and a concentration of 75±5 mg L-1 were maintained throughout the experiment, and pH, COD, and TOC were measured at 10 min intervals during a 60 min reaction. Our results confirmed that the combination of UV irradiation and photocatalytic TiO2 in the ozonation reaction improved the removal efficiency of both COD and TOC in aqueous solution at 20℃. Pseudo first-order rate constants and activation energies were quantified based on the COD and TOC measurements. We observed that the O3/UV, O3/UV/TiO2 system increased mineralization and reduced the activation energy (Ea) necessary for pyruvic acid decomposition.